Cults
Palmiga Caresto Arkham Car steering wheel cap - Keychain token
by Cults
Last crawled date: 6 years, 2 months ago
PLEASE RESPECT THE LICENSE AND GIVE APPROPRIATE CREDIT! or you risk
to dramatically lower the chances for new free content in the future... ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
These 3 designs are based on the steering wheel center cap from the Caresto Arkham Car that Caresto Cars (http://www.caresto.se/cargalle...) built for the Gumball 3000 race 2016.
These versions are flat and the scale is 50% compared to the originally 3D printed part. The original was 3D printed by Palmiga Innovation (http://rubber3dprinting.com/), using PI-ETPU 95-250 Carbon Black filament.
3 versions are available, one without holes, one that can be used as a key-chain token and one that for instance could be used to make a hanging mobile. You can probably find other uses too :- )
CARESTO ARKHAM CAR
This one of a kind car is built by Caresto to be part of Gumball 3000, 2016. The design is based on the car from the Arkham knight game but has been redesigned and manufactured with drivability and full functionality in mind. The car is BIG. The wheel base is 3.40 meters and the width of this special car is 2,5 meters. The special high rigid tubular frame is manufactured to provide good handling and give a solid feeling. Front and rear suspensions are fully independent and made with double wishbones connected to the coil over shock absorbers, up front through a special designed aluminum push rod. To power the car, we have used a 560hp V 10 engine connected to a paddle shift gear box affecting the 26" wheels. To stop the car we have used ABS supported 8-pot Brembo calipers in front and 6-pot in rear all connected to big brake discs. The complicated all carbon fiber body has been made from full scale moulds which are milled out from the CAD drawings. A lot of effort has been made to the design of the drawings and moulds. This to get the correct stance with full working systems and parts that will work together. Inside the car the driver and the passenger can enjoy the interior in a combination of black soft leather and "see trough" fabric, all kept together by golden stitches. The interior lights up in seats, floor and pedals when the cockpit opens up fully electrical operated. All comfort functions such as climate system, power steering, fantastic sound system, etc helps to make this car a comfortable driver, even that the look is hard as steel.
Get more info here: caresto.se https://www.instagram.com/carestocars/ https://www.instagram.com/teamgalag/ https://www.gumball3000.com/
PI-ETPU 95-250 Carbon Black is a Professional conductive & flexible 3D printing filament
Don´t need the conductivity?
Well the conductivity is great for some things but perhaps not your first choice? Then consider this:
This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:
The material composition eliminates “stringing / webbing” issues.
The hardness of 95 shore A and the carbon black filler makes for great print abilities.
The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very harsh environments.
The matte black surface finish has a very exclusive look.
The material feels very nice and dry to touch.
The elongation at break is only 250%.
Kind Regards
Thomas Palm / Leif Tufvesson
http://rubber3dprinting.com/ http://www.caresto.se/
http://palmiga.com/ https://www.instagram.com/carestocars
https://www.instagram.com/rubber3dprinting
to dramatically lower the chances for new free content in the future... ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
These 3 designs are based on the steering wheel center cap from the Caresto Arkham Car that Caresto Cars (http://www.caresto.se/cargalle...) built for the Gumball 3000 race 2016.
These versions are flat and the scale is 50% compared to the originally 3D printed part. The original was 3D printed by Palmiga Innovation (http://rubber3dprinting.com/), using PI-ETPU 95-250 Carbon Black filament.
3 versions are available, one without holes, one that can be used as a key-chain token and one that for instance could be used to make a hanging mobile. You can probably find other uses too :- )
CARESTO ARKHAM CAR
This one of a kind car is built by Caresto to be part of Gumball 3000, 2016. The design is based on the car from the Arkham knight game but has been redesigned and manufactured with drivability and full functionality in mind. The car is BIG. The wheel base is 3.40 meters and the width of this special car is 2,5 meters. The special high rigid tubular frame is manufactured to provide good handling and give a solid feeling. Front and rear suspensions are fully independent and made with double wishbones connected to the coil over shock absorbers, up front through a special designed aluminum push rod. To power the car, we have used a 560hp V 10 engine connected to a paddle shift gear box affecting the 26" wheels. To stop the car we have used ABS supported 8-pot Brembo calipers in front and 6-pot in rear all connected to big brake discs. The complicated all carbon fiber body has been made from full scale moulds which are milled out from the CAD drawings. A lot of effort has been made to the design of the drawings and moulds. This to get the correct stance with full working systems and parts that will work together. Inside the car the driver and the passenger can enjoy the interior in a combination of black soft leather and "see trough" fabric, all kept together by golden stitches. The interior lights up in seats, floor and pedals when the cockpit opens up fully electrical operated. All comfort functions such as climate system, power steering, fantastic sound system, etc helps to make this car a comfortable driver, even that the look is hard as steel.
Get more info here: caresto.se https://www.instagram.com/carestocars/ https://www.instagram.com/teamgalag/ https://www.gumball3000.com/
PI-ETPU 95-250 Carbon Black is a Professional conductive & flexible 3D printing filament
Don´t need the conductivity?
Well the conductivity is great for some things but perhaps not your first choice? Then consider this:
This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:
The material composition eliminates “stringing / webbing” issues.
The hardness of 95 shore A and the carbon black filler makes for great print abilities.
The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very harsh environments.
The matte black surface finish has a very exclusive look.
The material feels very nice and dry to touch.
The elongation at break is only 250%.
Kind Regards
Thomas Palm / Leif Tufvesson
http://rubber3dprinting.com/ http://www.caresto.se/
http://palmiga.com/ https://www.instagram.com/carestocars
https://www.instagram.com/rubber3dprinting
Similar models
cults
free
Bat Barrette
...
https://twitter.com/rubber3dprint
use my designs on your own risk, i will in no way be responsible for any damages or injuries.
cults
free
Palmiga OpenRC Truggy tubeless wheels
...sed etc... keep in mind that you use my designs on your own risk and that i in no way is responsible for any damage och injuries.
cults
free
Palmiga Bracelet and/or ESD Anti Static Wrist Strap
...al feels very nice and dry to touch.
•it´s not too stretchy and will do great for timing belts etc.
http://rubber3dprinting.com/
cults
free
Palmiga ESD Anti Static Protection for Vacuum Cleaner Nozzle
...al feels very nice and dry to touch.
•it´s not too stretchy and will do great for timing belts etc.
http://rubber3dprinting.com/
cults
free
Palmiga OpenRC F1 Low Profile Differential Rims
...o way is responsible for any damage och injuries.
check out the diff:
https://youtu.be/ovfahlvhfgs
https://youtu.be/lzp2zpeqpa4
cults
free
Earthing - Grounding plugs for diam 4 mm Red Round Connector
...al feels very nice and dry to touch.
•it´s not too stretchy and will do great for timing belts etc.
http://rubber3dprinting.com/
cults
free
Palmiga RC-Car Basilisk Tires
...ed etc... keep in mind that you use my designs on your own risk and that i in no way is responsible for any damage och injuries.
cults
free
Christmas Tree Spiral Bauble with Xmas Trees & Snowmen
...ed etc... keep in mind that you use my designs on your own risk and that i in no way is responsible for any damage och injuries.
cults
$6
F1 Steering Wheel Cufflinks
...teering wheel cufflinks
cults
cufflinks formula 1 steering wheel racing fashion design renault team cars
for the car enthusiasts.
cults
free
Mini stylus pen for smartphones/tablets
...ductive_filament mini phone smartphone stylus pen
use of a conductive filament.
http://horizonlab.co/2017/05/06/mini-stylus-pen/
Arkham
cults
$8
Arkham Knight Robin Mask
... the mask is ~81mm high and ~130mm wide .
this is a fan-made representation.
we are in no way affiliated licensed
by dc comics
cults
free
Batman Arkham Asylum Bust
...like action figures and games? don't forget to check out play asia, is a great site:
https://www.play-asia.com/?tagid=1328591
cults
free
Another Batman Bust (HD) Arkham
... for the original mesh, it was derived from the original low poly game model as show in pic, re-meshed and sculpted for printing.
cults
$2
Pumpkin Batman Arkham Knight
...in batman arkham knight
cults
batman sacrecrow halloween game
batman: the long halloween easter egg on batman arkaham knight game
cults
free
Deathstroke mask Arkham Origins with Back Piece
...nted the original. so if you printed the original at 100% the back piece will need to be printed at 90% to be at the same scale.
cults
free
Batarang (Batman: Arkham Knight)
...rt on. i used super glue. just make sure to leave the blades glue free as they are designed to rotate so they can open and close.
cults
free
Card and token holder
...les jeux "les contrées de l'horreur" et "horreur à arkhamquot;. ...
cults
free
Bat Barrette
...process of helping out with the caresto arkham car (http://rubber3dprinting.com/3d-printed-parts-in-the-caresto-arkhamcar/ ) i was inspired to make my own bat...
cults
free
Joker Burst
...joker burst cults arkham batman burst character game joker the_joker i took the...
Palmiga
cults
free
Palmiga Sandals V0.2
...palmiga sandals v0.2
cults
palmiga sandals v0.2
palmiga sandals v0.2
cults
free
Palmiga Ribbon Sandals V2.4
...palmiga ribbon sandals v2.4
cults
palmiga ribbon sandals v2.4
palmiga ribbon sandals v2.4
cults
free
Palmiga MR Vise Guy
...palmiga mr vise guy
cults
palmiga mr vise guy
palmiga mr vise guy
cults
free
Palmiga Multi Ribbon Sandals V4.11
...palmiga multi ribbon sandals v4.11
cults
palmiga multi ribbon sandals v4.11
palmiga multi ribbon sandals v4.11
cults
free
Palmiga Stimuli-Breathe Multi Ribbon Sandals
...muli-breathe multi ribbon sandals
cults
palmiga stimuli-breathe multi ribbon sandals
palmiga stimuli-breathe multi ribbon sandals
cults
free
Palmiga OpenRC Truggy tubeless wheels
...sed etc... keep in mind that you use my designs on your own risk and that i in no way is responsible for any damage och injuries.
cults
free
Palmiga RC-Car Basilisk Tires
...ed etc... keep in mind that you use my designs on your own risk and that i in no way is responsible for any damage och injuries.
cults
free
Palmiga OpenRC F1 Low Profile Differential Rims
...o way is responsible for any damage och injuries.
check out the diff:
https://youtu.be/ovfahlvhfgs
https://youtu.be/lzp2zpeqpa4
cults
free
Palmiga ESD Anti Static Protection for Vacuum Cleaner Nozzle
...al feels very nice and dry to touch.
•it´s not too stretchy and will do great for timing belts etc.
http://rubber3dprinting.com/
cults
free
Palmiga Bracelet and/or ESD Anti Static Wrist Strap
...al feels very nice and dry to touch.
•it´s not too stretchy and will do great for timing belts etc.
http://rubber3dprinting.com/
Steering
cults
$6
F1 Steering Wheel Cufflinks
...teering wheel cufflinks
cults
cufflinks formula 1 steering wheel racing fashion design renault team cars
for the car enthusiasts.
cults
free
ZB KartWheel - Nintendo Switch Steering Wheel
... nintendo switch steering wheel
cults
zb kartwheel - nintendo switch steering wheel
zb kartwheel - nintendo switch steering wheel
cults
free
Skid steer
...are such that if you want the parts to move you need to print it with a small nozzle at 1 mm layer height, or scale up the model.
cults
free
Steering wheel control
...heel control
cults
consignment conviction security valves at flying
caution this fragile device does not provide real protection.
cults
$1
Steering servo housing Rc 1/18
... truggy model because
steering servo case.
inside dimensions. 35.93 mm by 30.71.
outside dimensions. 45.00mm over 40.00 mm.
stl.
cults
$20
Volante Domo Ferrari del 1954 - Steering wheel Domo Ferrari
...4
the model originated from the need to rebuild the steering wheel of a domo ferrari 500 mondial guided wire of 1954 very rare...
cults
$2
Thrustmaster steering wheel storage for Playseat Challenge
...us/playseat-challenge-steering-wheel-bar-play-remover
https://cults3d.com/en/3d-model/gadget/playseat-challenge-headset-vr-hanger
cults
$12
Repairing a Video Game Steering Wheel Fixture
...assemble nut part screw head part a clamping knob with an insert m8 nut. the two shells also receive an m8 nut (intended housing)
cults
$6
Thrustmaster T500RS Steering Wheel Adapters - Many different wheel standards.
...ttps://www.banggood.com/300pcs-m3-m4-m5-m6-m8-m10-stainless-steel-metric-nut-assortment-kit-p-1112038.html?p=hd240528697332015103
cults
free
Playseat Challenge steering wheel bar play remover.
...del/various/playseat-challenge-logitech-shifter-mount
https://cults3d.com/en/3d-model/gadget/playseat-challenge-headset-vr-hanger
Token
cults
free
Caddy token and token holder
...whole will look like a well known cartoon character.
to take a token it is necessary to spread very slightly the token holder ...
cults
free
Trolley Token
...trolley token
cults
trolley token
trolley token
cults
free
Token holder
...s
cthulhu map card the elders sign token arrangement
token holder:
- the sign of the ancients
token holder:
- the elders sign
cults
free
token cart
...token cart
cults
simple shopping cart token!
cults
free
Caddy's Token
...caddy's token
cults
simple caddy token
cults
free
Female Token
...ronnage
token made for the game the sign of the ancients.
token created for the game the elders sign.
x: 20mm
y: 20 mm
z: 56 mm
cults
free
Male Token
...ronnage
token made for the game the sign of the ancients.
token created for the game the elders sign.
x: 20mm
y: 20 mm
z: 56 mm
cults
free
Scientist Game Tokens
...scientist game tokens
cults
scientist game tokens
scientist game tokens
cults
free
Dumbbell game tokens
...dumbbell game tokens
cults
dumbbell game tokens
dumbbell game tokens
cults
free
Jedi token
...oken
cults
star wars jedi token board games
i made this jedi token to be used in board games. i recommend scale it to 1/2. enjoy!
Wheel
cults
free
wheel
...wheel
cults
wheel car robo
wheel for motor
cults
free
Wheel
...wheel
cults
car hub rim tire wheel
a wheel from an abandoned car project.
cults
$1
Lego duplo - Wheel - Wheel
... wheel rack, this wheel is identical to the duplo wheel for the flash mc queen model of the cartoon cars
dimension 26,1x11mm
cults
free
Wheel - Wheel and Pneumatic
...wheel and pneumatic
for key holder, to hang in his car, to put on his desk
in silver color
and also, with a black felt!
a +
nop21
cults
free
Pelton wheel
...pelton wheel
cults
pelton wheel
pelton wheel
cults
free
Wheel Trophy
...wheel trophy
cults
wheel trophy
wheel trophy
cults
free
ring wheel wheelbarrow wheel robomow
...om robomow wheel extension wheel crampon
the original hubcap is mounted on this new ring
the pink ring
photos to come
cults
$1
Sport wheel
...sport wheel
cults
sport wheel for any project.
cults
$1
Lego duplo - Wheel stand - wheel support
...ults
cars toy lego duplo mc queen flash art car wheel
lego wheel carrier duplo going on with lego wheel,
dimension 62x32x9mm
cults
$1
Wheel dishwasher & Axis wheel dishwasher
...asher wheel file. it is rather classic and adapts to a lot of dishes. the axis of attachment of the wheel is included in the file
Cap
cults
free
cap screw cap placo
...cap screw cap placo
cults
cap screw cap placo
cults
$1
Caps
...caps
cults
cap pipe
misc caps were used to cover a pipe that was sticking out of my rv.
cults
$3
Cap hook
...cap hook
cults
cap
hook to repair cap
cults
free
XT60 Cap
...xt60 cap
cults
xt60 cap
xt60 cap
cults
$23
Wolf Cap
...wolf cap
cults
wolf werewolf cap mask fasion
high poly wolf head cap.
cults
$1
Fishing cap
...fishing cap
cults
peche bouchon
standard fishing cap.
cults
$3
Bumper End Cap - Square Tubing Cap
...bing cap
cults
automotive rv motorhome bumper end cap
this is a cap that is used to cover the ends of the bumper on my motorhome.
cults
free
Fishing cap
...fishing cap
cults
bouchon de pêche
round fishing cap.
cults
free
CAP clover
...cap clover
cults
bike car wheel tap
cap for valve schrader
cults
free
Flip Lens Cap
...flip lens cap
cults
flip lens cap
flip lens cap
Car
cults
free
Car Wheel, Well Car
...car wheel, well car
cults
car
pdf and plan piece made by config on solidworks
cults
free
Garage cars
...garage cars
cults
cars car arrangement box
car storage garage
cults
$4
Little Car
...little car
cults
little car
little car
cults
free
EUMAKERS' Car - Toy car
... of available colours, so have fun customising your eumakers' car!
designed by: [serena fanara](http://www.serenafanara.it/)
cults
$1
Car keychain
...car keychain
cults
new design keychain 4 * 4 car
cults
free
Puzzle car
...puzzle car
cults
puzzle poly because make
make your car
cults
free
Sports Car pull-back car toy
...sports car pull-back car toy
cults
car_toyn pull-back car sports_car toys
my 123d design portfolio - sports car pull-back toy
cults
$4
homer car the homero car
...sis (only supports for the chassis)
any comments are welcome! have fun printing !!
final size of the model 18 cm approx
cults
free
Car pencil pot / Car pencil box
...car pencil pot / car pencil box
cults
pot toy pencil
achievements of a pencil pot in the shape of a car.
cults
free
car mockups
...ckups
cults
hubcaps model car
realization of two type hubcap for car model diameter 100 mm height 40 mm printed scale 0.1 and 0.2
Keychain
cults
free
Keychain
...keychain
cults
keychain
keychain
cults
free
Keychain Batman / Batman Keychain
...designed to be printed in color (video tutorial of the printing method using slic3r)
https://www.youtube.com/watch?v=m2lewrzax_q
cults
free
Gimble Keychain
...gimble keychain
cults
gimble keychain
gimble keychain
cults
free
volleyball keychain
...volleyball keychain
cults
volleyball keychain
volleyball keychain
cults
free
DNA keychain
...dna keychain
cults
dna keychain
dna keychain
cults
free
pokemon keychain
...pokemon keychain
cults
pokemon keychain
pokemon keychain
cults
free
ironman keychain
...ironman keychain
cults
ironman keychain
ironman keychain
cults
free
Stark Keychain
...stark keychain
cults
stark keychain
stark keychain
cults
free
Greyjoy Keychain
...greyjoy keychain
cults
greyjoy keychain
greyjoy keychain
cults
free
jw.org Keychain
...jw.org keychain
cults
jw.org keychain
keychain with the jw.org logo on.