Thingiverse
P6*6 120 Pinhole Camera by schlem
by Thingiverse
Last crawled date: 3 years ago
*HEY! This was a great camera, but my newer stuff is better! Please check out the terraPin It is directly descended from the P6*6. Also, the new ACME is completely 3Dprinted and assembles without fasteners!! All my newer camera designs are much simpler to build and better to shoot than the P6*6!
This pinhole camera shoots medium-format 120 film! Shoots a 6X6 cm frame!
NEWS FLASH - Illustrated assembly instructions in MAKE: magazine edition #41 out Sept 2014 !! Recently republished in Best of Make Vol 2!
New P6*6W - Wide Angle version - Kodak Ektar 100, Fuji Acros 100 and Fuji Velvia 50 transparency film:https://www.flickr.com/photos/theschlem/sets/72157645030373964/
New Butta Shutta for remote cable release
Look for addendum to user's guide, but more info here:http://www.thingiverse.com/thing:395523Viewfinders! You asked for 'em, I designed 'em - more info here: http://www.thingiverse.com/thing:363857
An alternative set of parts has been designed to capture a wider angle of view. The original P6*6 already shoots a fairly wide angle frame at 62 deg horizontally; the P6*6W shoots an angle of 77.5 deg horizontally. For comparison, a 50mm lens on a 35mm film camera has a 40 deg horizontal angle of view.
The wider angle means a faster camera too: f/135 vs f/167. Details in Instructions.
-------------- P6*6 Specs --------------
50mm focal length
designed for a 0.30mm pinhole
f-stop of f/167
62 degree horiz. field of view.
-------------- P6*6W Specs --------------
35mm focal length
designed for a 0.26mm pinhole
f-stop of f/135
77.4 deg horiz. field of view.Photos from the P6*6 are posted here:http://www.flickr.com/photos/theschlem/sets/72157636632862045/
Processing by Moon Photo, Seattle http://www.moonphotolab.com/
Images on Flickr may differ from raw scans in contrast and brightness.
The P6*6 traveled to Amsterdam for Worldwide Pinhole Photography Day 2014
On that rainy day, I spoke with one of the organizers of our AMS meetup, Alex Yates of Pinholista.com, about 3D printing and pinhole photography on the Pinhole Podcast
Visit the 3D Printed Cameras group on Flickr
The mission is to share and promote open source cameras and related parts, created with CAD applications and 3D printing. Please join and post content!If you download this from somewhere besides Thingiverse, and printed it, please post pics on this thingiverse.com page! Please - I want to recognize and support you too
I understand skepticism; I hope that if you have been delaying your pinhole photographic adventures, the onslaught of my dubiously composed and poorly-chosen subject matter will convince you that this camera works and that you can print one and shoot photos!
As to how to build and use the P6*6 - All is revealed in the new User's Guide. Anyone can put this camera together and create amazing photographs. Assembly is detailed and simplified in a new document: "P66_assy_revised.pdf"No 3D printer yet?
I have obsoleted the P6*6, but I offer my newer cameras available assembled in full on Tindie
Hate the flat shutter plate on front of the "lens"? Dress it up a bit with the trim plate and pinhole cap!http://www.thingiverse.com/thing:219829
Worried that the friction-fit of the cap on the body could pop open and ruin your film? (IFAIK, this has never happened) A Sliding Body Clip secures the cap securely to the body, preventing a dreaded accidental exposure of your film.http://www.thingiverse.com/thing:228857
NEW!! Thingiversian iandoubleyou designed a clip for the knob-side for extra security! Give it a look-see and consider printing this addition.
New, photographic filter adapter! Use neutral density filters to slow exposure times, or colored filters for effects. Not just for the P66, good for any camera without a threaded lens barrel:http://www.thingiverse.com/thing:240732
And a tiny P66 keychain!http://www.thingiverse.com/thing:252857
I have shot dozens of rolls of film through this camera now. I find this camera a delight to shoot. I am very happy with the frame indexing. Like any camera, excessive movement during exposures will blur your image. This makes very short exposures (1-2 seconds) impractical for best results unless you can absolutely immobilize the camera. A neutral density filter (which increases exposure duration by whole stops) or a remote shutter release mechanism will address this limitation and is a future improvement I plan to make. Alternately, for "quick" exposures, you can cover the pinhole with your finger, open the shutter and (literally) manually time your exposure with your finger, then close the shutter - another old-time pinhole trick.
-schlem
Incorporating aubenc's Knurled Surface Library V2, and modeled around the handy 120 Film Spool by Jakebot, the P66 builds on the PINHE4D and PINH5AD pinhole cameras designs.Updates
12-6-13 After some experimentation with different 120 films, I find that some spools are slightly larger than others. This affects the clearance at the winder spool and rotating baffle (small slotted disk); the cap will not snap completely shut. I haven't suffered any damage to negatives from this, but, just to be sure, I have reworked the baffle to a thinner 2mm thickness. You can download and print either the whole winder assembly (knob, baffle, drive) or just the baffle. I suggest having a spare knob and drive handy if you try the Film Clip accessory: http://www.thingiverse.com/thing:197924
__New Wider angle version P66W f/135Exposure duration table updated including:__
Fuji Neopan Acros 100 B&W neg film
Ilford Delta 100 B&W neg film
Kodak Ektar 100 Color neg film
Fuji Velvia 100 Color slide film
Fuji Velvia 50 Color slide film
Ilford FP4 B&W neg film
Kodak 400TX B&W neg film
ATTENTION
This work is licensed under the Creative Commons - Attribution - Non-Commercial license. This license applies only to the files and documents available for download from the Thing Files section of this Thing.All other related content (photographs, videos, and verbiage such as contained in "Description" or "Instructions" ) are excluded from this license. with all rights reserved, unless specifically available for download This notice constitutes a clarification, not a change, to licensing for this design.
This pinhole camera shoots medium-format 120 film! Shoots a 6X6 cm frame!
NEWS FLASH - Illustrated assembly instructions in MAKE: magazine edition #41 out Sept 2014 !! Recently republished in Best of Make Vol 2!
New P6*6W - Wide Angle version - Kodak Ektar 100, Fuji Acros 100 and Fuji Velvia 50 transparency film:https://www.flickr.com/photos/theschlem/sets/72157645030373964/
New Butta Shutta for remote cable release
Look for addendum to user's guide, but more info here:http://www.thingiverse.com/thing:395523Viewfinders! You asked for 'em, I designed 'em - more info here: http://www.thingiverse.com/thing:363857
An alternative set of parts has been designed to capture a wider angle of view. The original P6*6 already shoots a fairly wide angle frame at 62 deg horizontally; the P6*6W shoots an angle of 77.5 deg horizontally. For comparison, a 50mm lens on a 35mm film camera has a 40 deg horizontal angle of view.
The wider angle means a faster camera too: f/135 vs f/167. Details in Instructions.
-------------- P6*6 Specs --------------
50mm focal length
designed for a 0.30mm pinhole
f-stop of f/167
62 degree horiz. field of view.
-------------- P6*6W Specs --------------
35mm focal length
designed for a 0.26mm pinhole
f-stop of f/135
77.4 deg horiz. field of view.Photos from the P6*6 are posted here:http://www.flickr.com/photos/theschlem/sets/72157636632862045/
Processing by Moon Photo, Seattle http://www.moonphotolab.com/
Images on Flickr may differ from raw scans in contrast and brightness.
The P6*6 traveled to Amsterdam for Worldwide Pinhole Photography Day 2014
On that rainy day, I spoke with one of the organizers of our AMS meetup, Alex Yates of Pinholista.com, about 3D printing and pinhole photography on the Pinhole Podcast
Visit the 3D Printed Cameras group on Flickr
The mission is to share and promote open source cameras and related parts, created with CAD applications and 3D printing. Please join and post content!If you download this from somewhere besides Thingiverse, and printed it, please post pics on this thingiverse.com page! Please - I want to recognize and support you too
I understand skepticism; I hope that if you have been delaying your pinhole photographic adventures, the onslaught of my dubiously composed and poorly-chosen subject matter will convince you that this camera works and that you can print one and shoot photos!
As to how to build and use the P6*6 - All is revealed in the new User's Guide. Anyone can put this camera together and create amazing photographs. Assembly is detailed and simplified in a new document: "P66_assy_revised.pdf"No 3D printer yet?
I have obsoleted the P6*6, but I offer my newer cameras available assembled in full on Tindie
Hate the flat shutter plate on front of the "lens"? Dress it up a bit with the trim plate and pinhole cap!http://www.thingiverse.com/thing:219829
Worried that the friction-fit of the cap on the body could pop open and ruin your film? (IFAIK, this has never happened) A Sliding Body Clip secures the cap securely to the body, preventing a dreaded accidental exposure of your film.http://www.thingiverse.com/thing:228857
NEW!! Thingiversian iandoubleyou designed a clip for the knob-side for extra security! Give it a look-see and consider printing this addition.
New, photographic filter adapter! Use neutral density filters to slow exposure times, or colored filters for effects. Not just for the P66, good for any camera without a threaded lens barrel:http://www.thingiverse.com/thing:240732
And a tiny P66 keychain!http://www.thingiverse.com/thing:252857
I have shot dozens of rolls of film through this camera now. I find this camera a delight to shoot. I am very happy with the frame indexing. Like any camera, excessive movement during exposures will blur your image. This makes very short exposures (1-2 seconds) impractical for best results unless you can absolutely immobilize the camera. A neutral density filter (which increases exposure duration by whole stops) or a remote shutter release mechanism will address this limitation and is a future improvement I plan to make. Alternately, for "quick" exposures, you can cover the pinhole with your finger, open the shutter and (literally) manually time your exposure with your finger, then close the shutter - another old-time pinhole trick.
-schlem
Incorporating aubenc's Knurled Surface Library V2, and modeled around the handy 120 Film Spool by Jakebot, the P66 builds on the PINHE4D and PINH5AD pinhole cameras designs.Updates
12-6-13 After some experimentation with different 120 films, I find that some spools are slightly larger than others. This affects the clearance at the winder spool and rotating baffle (small slotted disk); the cap will not snap completely shut. I haven't suffered any damage to negatives from this, but, just to be sure, I have reworked the baffle to a thinner 2mm thickness. You can download and print either the whole winder assembly (knob, baffle, drive) or just the baffle. I suggest having a spare knob and drive handy if you try the Film Clip accessory: http://www.thingiverse.com/thing:197924
__New Wider angle version P66W f/135Exposure duration table updated including:__
Fuji Neopan Acros 100 B&W neg film
Ilford Delta 100 B&W neg film
Kodak Ektar 100 Color neg film
Fuji Velvia 100 Color slide film
Fuji Velvia 50 Color slide film
Ilford FP4 B&W neg film
Kodak 400TX B&W neg film
ATTENTION
This work is licensed under the Creative Commons - Attribution - Non-Commercial license. This license applies only to the files and documents available for download from the Thing Files section of this Thing.All other related content (photographs, videos, and verbiage such as contained in "Description" or "Instructions" ) are excluded from this license. with all rights reserved, unless specifically available for download This notice constitutes a clarification, not a change, to licensing for this design.
Similar models
thingiverse
free
The P6*6W, a Wide Angle 120 film Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
User's Guide for P6*6 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin Bijou 6 x 4.5 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
Shutter with holes for screws for the Pinhole Camera by vegos
...ingiverse
shutter parts with holes for screws for the 3d printed pinhole 35 mm camera.
(http://www.thingiverse.com/thing:531244)
thingiverse
free
Trim Ring & Cap for P6*6 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin 6X6 "DX18" - 18mm Pinhole Camera Extension by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
Butta Shutta for the P6*6 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
P5 MUTO Wide Angle 4X5 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
Mini P6*6 Pinhole Camera Keyring by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
terraPin, a 120 Film Pinhole Photography System by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
Schlem
thingiverse
free
Tweezees by schlem
...tweezees by schlem
thingiverse
use 'em as chopsticks, use 'em as tongs. with springy action!
thingiverse
free
Simple Demitasse by schlem
...tasse by schlem
thingiverse
this thing was made with tinkercad.
you can order one here: http://www.shapeways.com/shops/bitforge
thingiverse
free
Flywatter Hanger by schlem
...tter by geir ( http://www.thingiverse.com/thing:9518 ), but wanted a way to hang it up. hole for dowel is 7mm, like thing # 9518
thingiverse
free
Dorba iPhone4 Case by schlem
...se
this thing was made with tinkercad.
for more information on the rare and elusive dorba bear, go here: schlem.deviantart.com/
thingiverse
free
ACME AMERICAN WROUGHT ANVIL by schlem
...acme american wrought anvil by schlem
thingiverse
“quality is our #1 dream”
anvils in warner bros cartoons
thingiverse
free
Sake / Shot Glass by schlem
...ith tinkercad.
an elegant shot glass to catch the crema. no cumbersome handles to get in the way of symmetry or clumsy fingers.
thingiverse
free
Dorba Head by schlem
...ar, go here: schlem.deviantart.com/ check out my shop on shapeways to get a 3d print of this object: shapeways.com/shops/bitforge
thingiverse
free
Space Pinhole Photographer by schlem
... conflict, the quiet photographer uses simple tools and photochemical processes to capture the beauty of the cold harsh universe.
thingiverse
free
Double-Shot Espresso by schlem
... was made with tinkercad.
extra-wide shot glass to catch both spouts of your portafilter. with a dainty handle. mmmmmm- coffee
thingiverse
free
Wiring Loom Clip by schlem
...hingiverse
designed in tinkercad, to fit 6mm ply, like printrbot. keeps your wiring firmly secured, designed for 15 mm looming.
Pinhole
turbosquid
free
Pinhole Glasses
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Pinhole Camera by StarScape
...pinhole camera by starscape
thingiverse
pinhole camera
thingiverse
free
Pinhole Camera by asoberon
...pinhole camera by asoberon
thingiverse
a pinhole camera.
thingiverse
free
Pinhole Glasses by amitkalia
...pinhole glasses by amitkalia
thingiverse
pinhole glasseshttps://en.wikipedia.org/wiki/pinhole_glasses
thingiverse
free
Pinhole Eclipse Viewer by ThunderClan
...pinhole eclipse viewer by thunderclan
thingiverse
this is a pinhole viewer for the sun.
thingiverse
free
Top pinhole cofee by Vanson
...erse.com/thing:1486588
viewfinder for the pinhole cofee : http://www.thingiverse.com/thing:1500169
diameter box of coffee : 85 mm
thingiverse
free
Simple Pinhole Projector by kattanasio
...simple pinhole projector by kattanasio
thingiverse
very simple pinhole projector for the solar eclipse.
thingiverse
free
Viewfinder Pinhole sténopé by Vanson
...574
pinhole cofee mount for vanguard : http://www.thingiverse.com/thing:1486588
diameter box of coffee : 85 mm
31/0/2018 : add v2
thingiverse
free
Pinhole camera, Sténopé by Pradaldi
...pinhole camera, sténopé by pradaldi
thingiverse
simple design for a pinhole camera.
un sténopé tout simple.
thingiverse
free
pinhole cofee mount for vanguard by Vanson
...verse.com/thing:245574
viewfinder for the pinhole cofee : http://www.thingiverse.com/thing:1500169
diameter box of coffee : 85 mm
P6
turbosquid
$12
terrain p6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$17
Canyon old p6
...quid
royalty free 3d model canyon old p6 for download as max on turbosquid: 3d models for games, architecture, videos. (1670629)
3ddd
$1
люстра Wunderlicht WL11604G-P6
...люстра wunderlicht wl11604g-p6
3ddd
wunderlicht
люстра wunderlicht wl11604g-p6 высота 42, ширина 64, глубина 64
turbosquid
$59
Huawei Ascend P6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Lustra 6752 P6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Huawei Ascend P6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$15
Huawei Ascend P6
...nvironment map and vray settings. smartphones are animated and ready for rendering. thank you! please see some of my collection…
3d_export
$49
Huawei Ascend P6 3D Model
... 4g 3g android droid smartphone cell phone mobile cellular tft lcd touchscreen
huawei ascend p6 3d model humster3d 81686 3dexport
turbosquid
free
Charger for Huawei Ascend P6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$49
Huawei Ascend P6 S Pink 3D Model
...ascend p6 4g 3g android droid smartphone cell phone mobile cellular ips
huawei ascend p6 s pink 3d model humster3d 99388 3dexport
120
3ddd
$1
Life 120-120-50
... журнальный , круглый
автор модели: aeroslon
design_connected
$13
XZ3 120
...xz3 120
designconnected
magis xz3 120 computer generated 3d model. designed by van onck, andries & hiroko.
3ddd
$1
diamond so 120
...diamond so 120
3ddd
diamond , morosini
люстра diamond so 120
turbosquid
$10
Table 120
...lty free 3d model table 120 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1503795)
turbosquid
$6
Lamp 120
...alty free 3d model lamp 120 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1500749)
turbosquid
$15
Curtain 120
...e 3d model curtain 120 for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1618083)
3ddd
$1
Bench 120
...bench 120
3ddd
скамья
bench for two.
turbosquid
$20
Landscape 120
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Office 120
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
kerasan Bentley 120
... цветок , полотенце
комплект kerasan bentley 120
Camera
archibase_planet
free
Camera
...base planet
camera surveillance camera video camera
camera surveillance n090211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...hibase planet
camera security camera video camera
camera security n210515 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...se planet
camera web camera webcam
camera butterfly usb pc camera n090713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...mera
archibase planet
surveillance camera video camera camcorder
camera n011211 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera digital camera
camera canon digital n041211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera film camera phototechnique
camera n100214 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...amera
archibase planet
camera video camera camcorder
camera video n070315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...rchibase planet
camera video camera camcorder
camera studio n101213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Camera
...ibase planet
digital camera camera phototechnique
camera canon ixus 400 n310311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...ase planet
photocamera video camera camera
camera sony t300 black n291010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
6
3d_export
$18
tulip 6
...tulip 6
3dexport
tulip 6
3d_export
$5
hinge 6
...hinge 6
3dexport
hinge 6
3ddd
$1
MASIERO / FLASHWOOD STL 6 + 6
...6
3ddd
masiero
торшер flashwood stl 6 + 6 фабрики masiero
http://www.masierogroup.com/c87_697/it/flashwood%20stl%206%20+%206.ashx
turbosquid
$110
Atmos Cannon 2000 6*6
...yalty free 3d model atmos cannon 2000 6*6 for download as skp on turbosquid: 3d models for games, architecture, videos. (1528591)
turbosquid
$1
ae 6 6 electric locomotive
... free 3d model ae 6 6 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707537)
turbosquid
$39
A-6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
6 ковров
...6 ковров
3ddd
ковры , ковер
6 ковров
turbosquid
$12
Calligraphic Digit 6 Number 6
...hic digit 6 number 6 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389336)
turbosquid
$19
Case For Phone 6 Girl 6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
Iphone 6 & 6 Plus All
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.