GrabCAD
P1_2016
by GrabCAD
Last crawled date: 1 year, 11 months ago
So this is finally my version of the pressure switch: THE ALL NEW “P1_2016”.
Introduction:
This world is getting more and more digital, internet of things for example and many more. So also the technical devices should be able to work with a central control, should be flexible and easy to use, should be lightweight and space- and energy saving. This idea leads me to the idea of the new P1 Pressure switch witch is indeed very lightweight and environment friendly. It uses recyclable plastics and only a few metallic components.
How it works:
It should be easy to use, no more calibration of the switch – at every application.
The P1 has a small cylinder in it which is stored on a simple spring. So now if the pressure goes into the P1, over the standard connection for an 8mm flex tube, it pushes against the cylinder (or vacuum it) and moves it by this forward or backwards against the power of the spring. This movement moves also a simple potentiometer, which is welded with a rod on the spring. So the potentiometer changes the output voltage by changing the resistance.
On the backside of the P1, you can plug both male electrical connections to a control that can decide (or better can be adjusted) at which pressure (transmitted as voltage) it should switch.
Options:
So now you ask : Why not switching inside? And what about differential switching?
My answer is that it is simply not needed. There are better external controls than any intern can exist. Also there is the option that you can control your switch (=ext. control) over different switches. You can chance the pressure to switch at any time. If there are low and high pressure lines (diff.-switch), no problem, use two or more of them (e.g. one at the high and one at the low pressure line), because they are cheap to build and easy to assemble. Plug them booth at the same external control and use all the advantages of a modern control!
And if you have no space for an external control, just plug a small int. chip as control at the potentiometer and the chip at the contacts instead of directly the poti, it’s simple.
And if you do not want all these awesome features, replace the poti with a simple mechanical switch.
For the control. Give a voltage on the P1 and no pressure. Set this voltage at zero pressure.
The differential of the voltage||pressure can be calculated.
Tec. Requirements and Assembling:
So now you may think: Nice thing but there must be a problem – it is difficult to assemble.
It isn’t! If you take a closer look you will see, that it has the following things to produce:
- The plug for the tube (blue); it is a standard part
- Just stick it on the body (grey); it is a normal shell with a countersink on the front and three small blocks inside
- Build an easy cylinder with a simple seal (yellow)
- Get a standard potentiometer
- Build a round cap with to electrical connections soldered on it and a few drillings
- Use a bit cable
- Get 4 Pins, 1 Screw
It can be easily assembled from the backside, and is also maintenance friendly because it’s easy to change every part.
Specifications:
- It is very lightweight and has the following size: (only body) 11,7mm x 7mm
(with connections: length 23,28mm)
- 12 Parts
- Calibration of the P1 not needed
- Can be completely assembled automated
Introduction:
This world is getting more and more digital, internet of things for example and many more. So also the technical devices should be able to work with a central control, should be flexible and easy to use, should be lightweight and space- and energy saving. This idea leads me to the idea of the new P1 Pressure switch witch is indeed very lightweight and environment friendly. It uses recyclable plastics and only a few metallic components.
How it works:
It should be easy to use, no more calibration of the switch – at every application.
The P1 has a small cylinder in it which is stored on a simple spring. So now if the pressure goes into the P1, over the standard connection for an 8mm flex tube, it pushes against the cylinder (or vacuum it) and moves it by this forward or backwards against the power of the spring. This movement moves also a simple potentiometer, which is welded with a rod on the spring. So the potentiometer changes the output voltage by changing the resistance.
On the backside of the P1, you can plug both male electrical connections to a control that can decide (or better can be adjusted) at which pressure (transmitted as voltage) it should switch.
Options:
So now you ask : Why not switching inside? And what about differential switching?
My answer is that it is simply not needed. There are better external controls than any intern can exist. Also there is the option that you can control your switch (=ext. control) over different switches. You can chance the pressure to switch at any time. If there are low and high pressure lines (diff.-switch), no problem, use two or more of them (e.g. one at the high and one at the low pressure line), because they are cheap to build and easy to assemble. Plug them booth at the same external control and use all the advantages of a modern control!
And if you have no space for an external control, just plug a small int. chip as control at the potentiometer and the chip at the contacts instead of directly the poti, it’s simple.
And if you do not want all these awesome features, replace the poti with a simple mechanical switch.
For the control. Give a voltage on the P1 and no pressure. Set this voltage at zero pressure.
The differential of the voltage||pressure can be calculated.
Tec. Requirements and Assembling:
So now you may think: Nice thing but there must be a problem – it is difficult to assemble.
It isn’t! If you take a closer look you will see, that it has the following things to produce:
- The plug for the tube (blue); it is a standard part
- Just stick it on the body (grey); it is a normal shell with a countersink on the front and three small blocks inside
- Build an easy cylinder with a simple seal (yellow)
- Get a standard potentiometer
- Build a round cap with to electrical connections soldered on it and a few drillings
- Use a bit cable
- Get 4 Pins, 1 Screw
It can be easily assembled from the backside, and is also maintenance friendly because it’s easy to change every part.
Specifications:
- It is very lightweight and has the following size: (only body) 11,7mm x 7mm
(with connections: length 23,28mm)
- 12 Parts
- Calibration of the P1 not needed
- Can be completely assembled automated
Similar models
grabcad
free
Differential pressure switch for air including hose set DS-205F (S+S Regeltechnik)
...luss.eu/3-pressure-sensor/14-differential-pressure-switch-differential-pressure-controller/56-pressure-switch-for-air/110-ds-2/en
cg_trader
$8
Simple cylinder driving institutions
...essure head aluminum profile part manufacture machine equipment assembly production industrial industrial machine industrial part
grabcad
free
Differential Pressure Switch NC/NO with Pressure Adjustment
...maining components to assemble (automatically or manually) are 3.
the weight is estimate at about 4,1 g (1,1g plastic, 3g metal)
grabcad
free
Pressure Switch - Cylinder
...e flow is regulated by a screw, which also enables closing options.
the switch consists of seven parts (including the m2 screw).
grabcad
free
Differential Pressure Switch EMDD
...differential pressure switch emdd
grabcad
differential pressure switch emdd
thingiverse
free
LightTouch Detect Switch and Mount by skip1776
..." t-nut. this will allow the switch to be used with a wide variety of camera mounts with a standard 1/4"-20 connection.
grabcad
free
Potentiometer
...trols on audio equipment. potentiometers operated by a mechanism can be used as position transducers, for example, in a joystick.
grabcad
free
Differential pressure switch DTV1000X Regin
...differential pressure switch dtv1000x regin
grabcad
differential pressure switch dtv1000x regin
3dwarehouse
free
differential pressure switch
...differential pressure switch
3dwarehouse
differential pressure sensor #sensor
grabcad
free
Johnson Controls Pressure switch P77/P78
...johnson controls pressure switch p77/p78
grabcad
single and double connection pressure switches.
P1
turbosquid
$15
sofa p1
...turbosquid
royalty free 3d model sofa p1 for download as max on turbosquid: 3d models for games, architecture, videos. (1282595)
turbosquid
$10
McLaren P1
...bosquid
royalty free 3d model mclaren p1 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1668467)
3ddd
free
Elektra Verticale P1
...elektra verticale p1
3ddd
elektra , кофемашина
elektra verticale p1, кофемашина
turbosquid
$65
McLaren P1
...
royalty free 3d model mclaren p1 for download as jpg and max on turbosquid: 3d models for games, architecture, videos. (1226289)
3ddd
$1
3d панель - P1
...3d панель - p1
3ddd
панель
стеновая, гипсовая 3д панель p1. 500x500
turbosquid
$118
McLaren P1
...lty free 3d model mclaren p1 for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1661174)
turbosquid
$139
Mclaren P1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
p1 lamp
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
sofa p1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$29
P1 3D Model
...p1 3d model
3dexport
office 3d interior
p1 3d model arturrabello 3209 3dexport
2016
design_connected
$27
Sydney 2016
...sydney 2016
designconnected
poliform sydney 2016 computer generated 3d model. designed by massaud, jean-marie.
turbosquid
$15
Human-2016
...turbosquid
royalty free 3d model human-2016 for download as on turbosquid: 3d models for games, architecture, videos. (1175104)
3d_export
$5
polo sedan 2016
...polo sedan 2016
3dexport
polo sedan 2016 obj
turbosquid
$35
Towel 2016
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$26
Kitchen 2016
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
2016-07
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
2016-08
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
2016-010
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
2016-09
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
2016-06
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.