Thingiverse
OWI-535 Penny Gripper (2017 Science Olympiad) by cordovalabs
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a slide on set of gripper/extensions that fit onto the OWI-535 Robotic Arm Edge to allow for easier collection of pennies for the 2017 division C Science Olympiad. It should be fully rules complaint but check dimensions before using this design.
The OWI Penny Gripper requires no modification to the OWI-535, adds about 15 mm to the reach, and should gives the OWI-535 the ability to grab a stack of pennies up to 30 mm in heights. The griper should be able to grab other things then pennies but pennies is what it was designed to deal with.
Also included is a variant of the baseline OWI-535 Penny Gripper that will work if you have an older bot with the thicker foam on the end effector. This design requires the original foam to be installed.
Design Project: Project Apollo
====================================================================
Printed Parts needed:
2x OWI Adapter bolt (or OWI Adapter bolt Deep)
2x Gripper Mid 30mm
====================================================================
Hardware Needed:
2x M3x16 Bolts https://www.amazon.com/gp/product/B00W97MTII/
4x M3 nuts https://www.amazon.com/gp/product/B000NBIH92/
Some 3ALink Sound Dampening Mat
====================================================================
Info on Installing:
Feed the M3x16 blots through the concave side of the Gripper Mid 30mm and push the bolt head into the part until it is flush with he concave side of the part, see picture above.
Feed the M3x16 bolt with the Gripper Mid 30mm on it through the hole on the OWI Adapter bolt (or OWI Adapter bolt Deep) so that the Gripper Mid 30mm cannot freely rotate, see picture above.
Install two M3 nuts onto the end of the M3x16 bolt, see picture above. Use the two nut to either lock the position of the grippers or allow them to self level somewhat by locking the nuts away from the plastic.
Install foam to the concave side of the Gripper Mid 30mm as needed.
====================================================================
Info on the Design:
The OWI-535 Penny gripper a simple, no modification required, add on for the OWI-535 that gives it the ability to pick up more then a few pennies at a time. Fortunately it had the side effect of adding just enough length to the OWI-535 with the OWI-535 Gamma Mods to reach the north pennies in the 2017 version of the Robot Arm event from Science Olympiad.
The adapter is designed to fight tightly on the original foam of the OWI-535. Some minor sanding may be required to make it easier to slide on. The OWI-535 Penny Gripper should not slide off under normal operations. If it does, then the adapter may have been over sanded or you need to use the base line adapter instead of the deep variant.
Note: At time of upload, the design has not been tested in competition and has no guarantee of performance.
The OWI Penny Gripper requires no modification to the OWI-535, adds about 15 mm to the reach, and should gives the OWI-535 the ability to grab a stack of pennies up to 30 mm in heights. The griper should be able to grab other things then pennies but pennies is what it was designed to deal with.
Also included is a variant of the baseline OWI-535 Penny Gripper that will work if you have an older bot with the thicker foam on the end effector. This design requires the original foam to be installed.
Design Project: Project Apollo
====================================================================
Printed Parts needed:
2x OWI Adapter bolt (or OWI Adapter bolt Deep)
2x Gripper Mid 30mm
====================================================================
Hardware Needed:
2x M3x16 Bolts https://www.amazon.com/gp/product/B00W97MTII/
4x M3 nuts https://www.amazon.com/gp/product/B000NBIH92/
Some 3ALink Sound Dampening Mat
====================================================================
Info on Installing:
Feed the M3x16 blots through the concave side of the Gripper Mid 30mm and push the bolt head into the part until it is flush with he concave side of the part, see picture above.
Feed the M3x16 bolt with the Gripper Mid 30mm on it through the hole on the OWI Adapter bolt (or OWI Adapter bolt Deep) so that the Gripper Mid 30mm cannot freely rotate, see picture above.
Install two M3 nuts onto the end of the M3x16 bolt, see picture above. Use the two nut to either lock the position of the grippers or allow them to self level somewhat by locking the nuts away from the plastic.
Install foam to the concave side of the Gripper Mid 30mm as needed.
====================================================================
Info on the Design:
The OWI-535 Penny gripper a simple, no modification required, add on for the OWI-535 that gives it the ability to pick up more then a few pennies at a time. Fortunately it had the side effect of adding just enough length to the OWI-535 with the OWI-535 Gamma Mods to reach the north pennies in the 2017 version of the Robot Arm event from Science Olympiad.
The adapter is designed to fight tightly on the original foam of the OWI-535. Some minor sanding may be required to make it easier to slide on. The OWI-535 Penny Gripper should not slide off under normal operations. If it does, then the adapter may have been over sanded or you need to use the base line adapter instead of the deep variant.
Note: At time of upload, the design has not been tested in competition and has no guarantee of performance.
Similar models
thingiverse
free
RobotGeek Gripper - Penny Gripper (2017 Science Olympiad) by cordovalabs
...he 21.05 mm version.
note: at time of upload, the design has not been tested in competition and has no guarantee of performance.
thingiverse
free
OWI-535 Alpha Mods (2013 Science Olympiad) by cordovalabs
... responsible for any damage that may occur. use cautiously as this may led to stripped or otherwise damaged gears in the owi-535.
thingiverse
free
OWI-535 Gamma Mods (2017 Science Olympiad) by cordovalabs
... responsible for any damage that may occur. use cautiously as this may led to stripped or otherwise damaged gears in the owi-535.
thingiverse
free
Ender5 plus Bed wire supporter
... 5 plus bed wire supporter. it will ease your anxiety.
the following materials are required.
-2x m3x16 bolt and nut
-2x cable tie
thingiverse
free
Green Backdrop Adapter for Light Stand to Hold Bamboo Pole by FarrisHaris
... not spending so much.
2 light stands
bamboo pole
(m8 nut & m8 30mm bolt) x 2 at least are required.
see the pictures above.
thingiverse
free
Tronxy X3 E3D V6 Clone Mount by str2109
...09
thingiverse
v3 is the working version.
for the hotend you need 2x m3x25 screws and nuts. for the sensor 2x m3x16 should work.
thingiverse
free
Prusa I3 LCD Sidemount by Misanthrop
...or lcd display of a prusa i3 mk3s+
more space in the frontend and better handling.
required parts:
2x m3x12
2x m3x16
2x m3 nuts
thingiverse
free
Pop-filter on Shock-mount mount by atanasovgoran
...l but recommended)
1x m5x10 for the pop filter mount side (screw head within the pop filter)
1x m5 nut (optional but recommended)
thingiverse
free
SMD Part Flipper by Wiles
...flipping station.
parts:
2x 3d printed flip plate
2x 50mm square x 5mm thick esd foam
2x m3x12mm bolt
2x m3 nut
double sided tape
thingiverse
free
2X Extruder Upgrade by JoeSoap583
... the springs, so it is feasible to add the bolt on the left side only if that's the extruder where you use problem filaments.
Owi
unity_asset_store
$25
OWI - Fantasy Stylized props Environment [Owi-SP]
... stylized props environment [owi-sp] asset from ilham marlis. find this & other fantasy options on the unity asset store.
thingiverse
free
OWI ISS Tracker by Stevorino21
...iss tracker by stevorino21
thingiverse
owi parts to remove dc motors, remove and disable certain joints, and add stepper motors.
thingiverse
free
OWI Edge Potentiometer Holders by Bisichei
...owi edge potentiometer holders by bisichei
thingiverse
potentiometer holders for the owi edge robotic arm
thingiverse
free
OWI Robot Arm Modifications
...owi robot arm modifications
thingiverse
parts for a robotics project.
thingiverse
free
simple OWI Edge Robotic arm model by Bisichei
...simple owi edge robotic arm model by bisichei
thingiverse
these are 3d files required for the simple owi edge gui
thingiverse
free
Control OWI Robotic Arm Edge with Arduino by RobotSwarmControl
...armcontrol
thingiverse
3d parts to hook potentiometers to the owi robotic arm edge and code to control the arm with the arduino.
thingiverse
free
OWI Robot Painting Project by Doggerino
...ega 2560. potentiometers must be placed on each joint and the pot values must be replaced with pot values specific to your robot.
thingiverse
free
OWI-535 Gamma Mods (2017 Science Olympiad) by cordovalabs
... responsible for any damage that may occur. use cautiously as this may led to stripped or otherwise damaged gears in the owi-535.
thingiverse
free
OWI-535 Alpha Mods (2013 Science Olympiad) by cordovalabs
... responsible for any damage that may occur. use cautiously as this may led to stripped or otherwise damaged gears in the owi-535.
Cordovalabs
thingiverse
free
Wing Rib (2015 Science Olympiad) by cordovalabs
...is a simple wing rib for the 2014 science olympiad event, wright stuff.
the length of the rib is 66 mm and it is 1.5 mm thick.
thingiverse
free
CD/DVD Lightweigh Wheel Hub by cordovalabs
... was designed, to spec, for the hobbs high school science olympiad team. it was used as part of the second place gravity vehicle.
thingiverse
free
Gravity Vehicle (Science Olympiad 2013) by cordovalabs
...es, with very little modification.
note: this design has never been tested in competition and has no guarantee of performance.
thingiverse
free
Egg Block (2015 Science Olympiad) by cordovalabs
...attach it is glue.
note: at time of upload, the design has not been tested in competition and has no guarantee of performance.
thingiverse
free
Makerfire 4WD Replacement Motor Tabs by cordovalabs
...en tested on my letsrobot.tv robot for the past 5 months and have been holding up better then the one that came with the chassis.
thingiverse
free
War Hawk - Scrambler (2015 Science Olympiad) by cordovalabs
... using this design.
note: at time of upload, the design has not been tested in competition and has no guarantee of performance.
thingiverse
free
RoadRunner - Electrical Vehicle (2016 Science Olympiad) by cordovalabs
...re using this design.
note: at time of upload, the design has not been tested in competition and has no guarantee of performance.
thingiverse
free
Speed Bird - Scrambler (2015 Science Olympiad) by cordovalabs
... using this design.
note: at time of upload, the design has not been tested in competition and has no guarantee of performance.
thingiverse
free
Line Locator's Holsters by cordovalabs
...ng these holsters. these are made available as-is and i take no responsibility if you injure yourself while using these holsters.
thingiverse
free
Launcher Backpack - Scrambler (2015 Science Olympiad) by cordovalabs
...e old longer version.
note: at time of upload, the design has not been tested in competition and has no guarantee of performance.
Olympiad
3d_export
$6
Vancouver 3D Model
...2010 olympic games logo vancouver olympics 4d 3ds winter olympiad wireframe vancouver 3d model benq72 22789...
3d_export
$5
Olympic Torch 2010 3D Model
...2010 3d model 3dexport olympic torch 2010 snow winter olympiad games vancouver canada flame olympic torch 2010 3d model...
3d_export
$9
Olympic 3d Logo 3D Model
...london 3d logo summer united kingdom of the xxx olympiad sing emblem type polygon maya competitions wrestling olympic 3d...
3d_export
$12
Sport medal pack 3D Model
...winner ski jump nordic medals trophy award summer games olympiad athletic athletes gold silver bronze winter stadium sport medal...
cg_studio
$18
London Olimpic3d model
...3d logo summer united kingdom games of the xxx olympiad sing emblem type polygon maya competitions wrestling sports .obj...
cg_studio
$120
Ski jumping hill low detail3d model
...model cgstudio olympic champions winter jump nordic medal games olympiad stadium snow lift sport cable tower tribune arena hill...
cg_studio
$150
Ski jumping hill high detail3d model
...model cgstudio olympic champion winter jump nordic medal games olympiad stadium snow lift sport cable tower tribune arena hill...
cg_studio
$18
Ski jumping winter skis low poly3d model
...model cgstudio olympic champion winter jump nordic medal games olympiad stadium snow lift sport cable tower tribune arena hill...
3d_export
$17
Ski jumping skis low poly model 3d 3D Model
...model 3dexport olympic champion winter jump nordic medal games olympiad stadium snow lift sport cable tower tribune arena hill...
thingiverse
free
Trophies of Robotics Olympiad -UPF by Costella
... robotics olympiad- upf. organized by group of study and research in digital inclusion - gepid of university of passo fundo - upf
535
3ddd
free
535
...535
3ddd
tsinos . chair , tsinos
www.tsinos.gr
3ddd
$1
microsoft 535
... смартфон
смартфон microsoft 535
6 расцветок корпуса: черный, серый, белый, оранжевый, бирюзовый, зеленый
стек не свернут!
turbosquid
$200
Maz 535
... 3d model maz 535 for download as 3ds, max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1420832)
3ddd
$1
Medea art 535
...medea art 535
3ddd
medea , капитоне
фабрика medea art 535
диван большой 2500х1500х1000
turbosquid
$8
Microsoft Lumia 535
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$15
Microsoft Lumia 535 Orange
...microsoft lumia 535 orange
3docean
lumia microsoft nokia phone smartphone
a real looking microsoft lumia 535 made using blender
3d_ocean
$15
Microsoft Lumia 535
... htc iphone justtomas lumia microsoft nokia phone samsung smart touch windows
microsoft lumia 535 by justtomas .obj .3ds .c4d r16
3ddd
free
Стул Flai Eloée / art. 535
...стул flai eloée / art. 535
3ddd
flai
стул фабрики flai, модель eloée / art. 535
3d_export
$45
BMW 535 i e34 3D Model
...bmw 535 i e34 3d model
3dexport
bmw 535 series e34
bmw 535 i e34 3d model art power 26486 3dexport
3d_ocean
$15
Element 3D - Microsoft Lumia 535
...creen was separated. - two versions of e3d files supplied in c4d and obj files : orange lumia 535.e3d lumia 535 obj.e3d - just...
Penny
turbosquid
$15
Spongebob Penny
...id
royalty free 3d model spongebob penny for download as stl on turbosquid: 3d models for games, architecture, videos. (1167875)
turbosquid
$2
Ireland penny
...quid
royalty free 3d model ireland penny for download as max on turbosquid: 3d models for games, architecture, videos. (1204375)
turbosquid
$10
Penny ottoman
...yalty free 3d model penny ottoman for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1228848)
3ddd
$1
cattelan italia penny
...cattelan italia penny
3ddd
барный , cattelan italia
барный стул cattelan italia penny
turbosquid
$22
Heny Penny
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$17
Penny Farthing
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Pennie Sofa
...pennie sofa
3ddd
contemporary
hope u like it ^^
3ddd
$1
Penny Rose Sandals 02
...penny rose sandals 02
3ddd
обувь
limited edition penny rose sandals.
design by andre lb vieira
turbosquid
$55
Penny Farthing Bicycle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
Penny farthing bicycle
...y farthing bicycle for download as ma, max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1388970)
Gripper
turbosquid
$10
Gripper
...er
turbosquid
royalty free 3d model gripper for download as on turbosquid: 3d models for games, architecture, videos. (1341108)
archive3d
free
Gripper 3D Model
...pander grippers hand grippers
gripper n231212 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$5
gripper test
...gripper test
3dexport
robot gripper test model
3d_export
$10
adjustable bag gripper- gripper robot
...2 sizes : 400 or 500 mm of width. detailed and fully detailed design (screws, full part). designed for robot kawasaki cp180. web:
turbosquid
$10
Gripper 1
...
turbosquid
royalty free 3d model gripper 1 for download as on turbosquid: 3d models for games, architecture, videos. (1341110)
3d_export
$7
robotic gripper
...robotic gripper
3dexport
turbosquid
$40
Pneumatic Gripper 01
...d model pneumatic gripper 01 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1589617)
turbosquid
$19
Fitness Hand Gripper
...el fitness hand gripper for download as blend, blend, and obj on turbosquid: 3d models for games, architecture, videos. (1711575)
turbosquid
$15
Steel Hand Gripper
... 3d steel hand gripper for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1466474)
3d_export
free
Hexagonal Gripper M8
...hexagonal gripper m8
3dexport
more free 3d models here:
Science
turbosquid
$30
Science Building
...d
royalty free 3d model science building for download as max on turbosquid: 3d models for games, architecture, videos. (1148857)
turbosquid
$2
Bench Science
...quid
royalty free 3d model bench science for download as rfa on turbosquid: 3d models for games, architecture, videos. (1274551)
turbosquid
$5
Science Flasks
...ty free 3d model science flasks for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1639964)
turbosquid
$95
Megalopolis the science
...del megalopolis the science for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1189886)
turbosquid
$8
Science Stool
...3d model science stool for download as obj, dae, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1608945)
turbosquid
$25
Science Equipment
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
science desk_1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Museum of Science
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Science Equipment
...ce equipment for download as max, 3ds, dae, dxf, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1690832)
turbosquid
$56
Gun science fiction
...yalty free 3d model gun science fiction for download as blend on turbosquid: 3d models for games, architecture, videos. (1388382)
2017
turbosquid
$8
Human-2017
...turbosquid
royalty free 3d model human-2017 for download as on turbosquid: 3d models for games, architecture, videos. (1175106)
3d_export
$30
lambo centenario 2017
...lambo centenario 2017
3dexport
lambo centenario 2017
3d_export
$20
fusion titanium 2017
...fusion titanium 2017
3dexport
fusion titanium 2017
3d_export
$50
Toyota Tocama 2017
...toyota tocama 2017
3dexport
toyota tocama 2017 3d model.
turbosquid
$15
AMG 2017
...free 3d model amg 2017 for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1220414)
3d_export
$20
pagani huayra roadster 2017
...pagani huayra roadster 2017
3dexport
pagani huayra roadster 2017
3d_export
$129
Fiat Qubo 2017
...fiat qubo 2017
3dexport
3d_export
$129
Citroen Nemo 2017
...citroen nemo 2017
3dexport
turbosquid
$199
BENTLEY MULSANNE 2017
...yalty free 3d model bentley mulsanne 2017 for download as max on turbosquid: 3d models for games, architecture, videos. (1288372)
turbosquid
$100
THE WOODEN ARCHWAY 2017
...lty free 3d model the wooden archway 2017 for download as max on turbosquid: 3d models for games, architecture, videos. (1150410)