Thingiverse
Overlord Z-Probe caddy by Av8er
by Thingiverse
Last crawled date: 3 years ago
This is a caddy that will hold a Philmore 30-2400 Micro snap action switch. (available at Fry's in the US) Switch should press into a cutout on the bottom of the part. It also has a groove for the wires to exit.
Caddy will temporarily snap onto the delta Effector around the stock hotend nozzle without having to remove anything. When not in use it will clip around the heat shield above the fan.
Use the Normally Open & Common terminals on the switch and connect up to the SEN header on the top of the toolhead. use the center and the right pin on the SEN Connector. The connector you want to get is a Female JST PHR-3 connector. Don't forget to also buy the crimp pins if needed.
Right now only the following fork of Repetier firmware supports the Z-Probe on the OLP.
See this forum post http://www.dreammaker.cc/forum/viewtopic.php?f=9&t=259
Accuracy +/- .01%Probe offset from nozzle X+24mm Y+12mm Z+2mm (See Revisions)
You will most likely have to tweek the Z offset for your setup.
Caddy will temporarily snap onto the delta Effector around the stock hotend nozzle without having to remove anything. When not in use it will clip around the heat shield above the fan.
Use the Normally Open & Common terminals on the switch and connect up to the SEN header on the top of the toolhead. use the center and the right pin on the SEN Connector. The connector you want to get is a Female JST PHR-3 connector. Don't forget to also buy the crimp pins if needed.
Right now only the following fork of Repetier firmware supports the Z-Probe on the OLP.
See this forum post http://www.dreammaker.cc/forum/viewtopic.php?f=9&t=259
Accuracy +/- .01%Probe offset from nozzle X+24mm Y+12mm Z+2mm (See Revisions)
You will most likely have to tweek the Z offset for your setup.
Similar models
thingiverse
free
E3D V6 Wades Extruder - BL Touch Mount by CheopisIV
...elow (always!)
on two of the machines using e3d clones from leap3d on ebay. the actual e3d has the same x and y but a z of -1.4
thingiverse
free
Micromake D1 Z-Probe by grappyX
...robe.
fits perfectly on the original affector from the micromake d1 delta printer.
after calibrating add 17,5mm to your z-height.
thingiverse
free
Anet A8 probe holder right (18mm) by dacoon
... y offset: -front +behind [the nozzle]
#define z_probe_offset_from_extruder 0 // z offset: -below +above [the nozzle]
have fun
thingiverse
free
ANET A8 relocating the Z probe to the right... by aeropic
...n. the support is a long 18 mm tube with 2 m3 screws which will secure in place the probe: it is very rigid !
hope you will like!
thingiverse
free
ANET A8 Fan Cover with Bed Levelling Sensor Mount by NeMiiZz
...robing boundaries
left_probe_bed_position 45
right_probe_bed_position 190
front_probe_bed_position 15
back_probe_bed_position 155
thingiverse
free
Anet A6 BLTouch/3DTouch mount (front) by thvranken
...isplay or with command m851) and saved to the eeprom (using the display or with command m500), in my case, this was around -2 mm.
thingiverse
free
Z End Point switch replacement for Auto Level probe by marungao
... motor. well, now there is: just put some metal beneath the z probe using this "thing".
i'm using repetier firmware
thingiverse
free
Wanhao D6 Induction Probe Mount by 1bigpig
...be_calibration_updated.pdf. it also included the required g-code that needs to be added to your existing slicer starting script.
thingiverse
free
3D/BL touch mount for Anet A6 by ithinuel
...ly 3 grid points on a linear bed levelling.
i am printing on a borosilicate glass bed, i don't know if more point are needed.
thingiverse
free
Delta (mini kossel) auto bed level switch probe by CareFudundae
...ry), since that is where this bracket snaps in.
to see it in action: [https://youtu.be/n4vodqktqx8]
for more info, see this post.
Av8Er
thingiverse
free
JADCAT by Av8er
...he studs = 45mm
stud height = 5mm
arms = 70 x 8mm
arm thickness = 2mm
rev 1.2 - add radius on inside of studs to improve accuracy
thingiverse
free
Overlord Pro wire chafe guard by Av8er
... against the metal shield around the top of the hot end. this object protects the wire bundle from the sharp edges of the shield.
thingiverse
free
Eclips3D Corner bracket cover by Av8er
...fsn5-c) with the threaded screw holes.
use a single m5 flathead screw to hold the cover secure in place.(available at home depot)
thingiverse
free
Eclips3D A16 and A17 rod brackets by Av8er
...ate cracking.
added files with a little looser tolerances. rod hole is increased to 10.2mm, m3 nut cutouts are enlarged to 5.8mm.
thingiverse
free
Delta Rod Jig by Av8er
...m.
so if you want 280mm on center rods, space the blocks 250mm apart. (280 -15 -15 = 250)
added rod cutting jig to the collection
thingiverse
free
2020 Extrusion adjustable Endstop bracket by Av8er
...m the extrusion so the pcb wont hit the head of the m5 bolt.
2 m5x10 bolt to hold to 2020 extrusion
3 m3 square nuts
3 m3x8 bolts
thingiverse
free
BLTouch Mount for FLSun QQ by Av8er
...ouch to the mount.
i see that there is two different versions of the bltouch this should work for both the classic and the smart.
thingiverse
free
Mini Talon Motor Mount by Av8er
...ome tape over the back side of the nuts to keep the glue out of the nut threads.
if you want other bolt pattern size let me know.
thingiverse
free
Overlord Pro Effector plate by Av8er
...://www.thingiverse.com/thing:1084213
todo:
possibly redesign a layer cooling duct for a blower fan so i can make it even smaller.
thingiverse
free
1/2" (12.7mm) LED Rope Light clip by Av8er
...te a bit. other materials should work fine too.
these worked so well that i did not even use any of the original oem style clips!
Overlord
turbosquid
$35
OverLord TANK
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Overlord
...d
royalty free 3d model hk416 assault rifle for download as on turbosquid: 3d models for games, architecture, videos. (1508031)
3d_export
free
Download free Marker 3D Model
...free marker 3d model 3dexport marker marker 3d model overlord 81258...
thingiverse
free
The Fourth Overlord - Overlord 2
...the fourth overlord - overlord 2
thingiverse
the main character from the game overlord 2.
sketchfab
$5
Yggdrasil Overlord Coin
...am.com/kotomi_laufeyson
moneda de overlord. - yggdrasil overlord coin - buy royalty free 3d model by kotomi laufeyson (@kotomi)
thingiverse
free
necron overlord crypt
...necron overlord crypt
thingiverse
necron overlord crypt
thingiverse
free
Infinifactory Overlord by zachbarth
...infinifactory overlord by zachbarth
thingiverse
an alien overlord from infinifactory, by zachtronics.
thingiverse
free
overlord tank by calcqui
...overlord tank by calcqui
thingiverse
preview of work. c&c generlas overlord tank.
thingiverse
free
Overlord by DiMarzio
... bit bigger if you would want to. hope you like it!
concept:http://michalivan.deviantart.com/art/overlord-16years-old-162854584
thingiverse
free
OverLord Pararack ready by hugoelec
...overlord pararack ready by hugoelec
thingiverse
overlord pararack ready
Caddy
turbosquid
$10
scissor caddy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$89
Volkswagen Caddy 2011
... real car base. model is created accurately, in real units of measurement, qualitatively and maximally close to the original. ...
3d_export
$3
bath caddy tray for tub
...bath caddy tray for tub
3dexport
bath caddy tray for tub
turbosquid
$25
Chashaku and Tea caddy
...alty free 3d model chashaku and tea caddy for download as max on turbosquid: 3d models for games, architecture, videos. (1197555)
3d_export
$99
Volkswagen Caddy 2011 3D Model
...addy van 2011 2012 2013 2014 pickup commercial cab suv minivan mpv bus vw
volkswagen caddy 2011 3d model humster3d 39333 3dexport
turbosquid
$25
Caddy-Wing-Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Wood Garden Caddy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Oblivion Tool Caddy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$37
VW caddy TDI3d model
...vw caddy tdi3d model
cgstudio
.max - vw caddy tdi 3d model, royalty free license available, instant download after purchase.
cg_studio
$37
VW caddy SDI3d model
...man car vehicles vehicle transport
.max - vw caddy sdi 3d model, royalty free license available, instant download after purchase.
Probe
turbosquid
$25
Probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Mars probe space space exploration lunar probe
...be space space exploration lunar probe for download as max on turbosquid: 3d models for games, architecture, videos. (1630876)
turbosquid
$35
Space Probe
...osquid
royalty free 3d model space probe for download as c4d on turbosquid: 3d models for games, architecture, videos. (1571168)
turbosquid
$15
Space Probe
...osquid
royalty free 3d model space probe for download as obj on turbosquid: 3d models for games, architecture, videos. (1314864)
turbosquid
$25
Robot Probe
...y free 3d model robot probe for download as fbx, obj, and dae on turbosquid: 3d models for games, architecture, videos. (1537490)
turbosquid
$1
Dental Probe
...e 3d model dental probe for download as ma, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1312400)
turbosquid
$60
Police Probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Dental Probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Space probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Cassini Probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Z
3d_export
$5
nissan z
...nissan z
3dexport
nissan z
3ddd
$1
Vase Z
...vase z
3ddd
vase z
3ddd
$1
полотенцесушить Z
...полотенцесушить z
3ddd
полотенцесушитель
полотенцесушить z
design_connected
free
Z-Chair
...z-chair
designconnected
free 3d model of z-chair designed by karman, aleksei.
design_connected
$11
Z Lamp
...z lamp
designconnected
phillips z lamp computer generated 3d model. designed by kalff, louis.
3d_export
$5
Dragon balls z
...dragon balls z
3dexport
dragon ball z
turbosquid
$20
Fighter Z
...
turbosquid
royalty free 3d model fighter z for download as on turbosquid: 3d models for games, architecture, videos. (1292563)
turbosquid
$9
Pen Z
...pen z
turbosquid
free 3d model pen z for download as obj on turbosquid: 3d models for games, architecture, videos. (1686775)
turbosquid
free
z chair
...z chair
turbosquid
free 3d model z chair for download as max on turbosquid: 3d models for games, architecture, videos. (1410230)
turbosquid
$5
Letter Z
...urbosquid
royalty free 3d model letter z for download as max on turbosquid: 3d models for games, architecture, videos. (1408540)