Original MOTU Masters of the Universe Webstor Grappling Hook by ACL-Stands

Last crawled date: 2 years, 11 months ago

Well i decided to make another MOTU accessory for all the masters fans.After picking up a Webstor figure and repairing the back pack and was missing the grappling hook, and they are almost impossible to find, so i decided to just make one.This isn't exactly the same as the original, its slightly smaller but that makes it more scaled to the figure because the original grappling hook was a little too big from memory.This design also has the ability for the hook section to rotate exactly like the original.
You will need some loctite 401 or similar clear strong glue for this one, so you can glue those hooks in and it will never come out after that.I used the loctite 401 with the blue label, that stuff dries rock hard in like seconds.
To glue the hooks in on the right angle fit all three hooks in first and position them how you want, then just remove one at a time and glue that one back in, so you have the other hooks as a guide.
Use supports for the post :)
https://www.facebook.com/aclstand/