Oriental Lamp by Candor

Last crawled date: 4 years, 1 month ago

Since I have had lots of time on my hands these last few days I decided to make a decorative oriental lamp. This lamp should fit into any oriental themed design quite well.
This will probably require a larger print bed as each body section is 280 mm x 134 mm. There are 10 pieces total that will need to be printed. My lamp uses a FEIT LED candelabra E12 bulb.
I have had a horrible time trying to find a base that would fit this design. I had 2 from long ago and have been unable to find exact replacements. The best I could find were from Ebay (do a search for "Plastic E12 Lamp Screw Base Socket Light Lamp Holder Extender Converter set") but I still had to modify the bottom rail to be big enough to fit the base. And since I couldn't find one like I had, the replacement I did find requires that the cord be soldered to the base. You will also need an electrical cord with a switch, unless you intend on controlling this from a wall switch.
I printed this all in white PLA and just painted the sections I needed in whatever color I chose. As you can see from the pictures I chose all black with a red cover on my Design Plates