Thingiverse
OrangeRX JR Module antenna relocation by dmyers7
by Thingiverse
Last crawled date: 3 years ago
2-17-2015 Quick update note: Per user Porksmash, it looks like HobbyKing has updated their orange Tx module to eliminate the micro coax as part of the internal design and thereby killing this hack. That said, you could buy a 70mm micro coax and matching 2.4Ghz Antenna from Aloft Hobbies .com and solder the micro coax directly to the board (signal and shield). You will have to remove the current connector to try and maintain proper signal characteristics. If you do this, !! make sure you range test !! Use hot glue to lock the coax in place once you have a working and range tested system. There is the possibility that if not done right the transmitter module can burnout mid flight and you will loose control of your aircraft. (i.e. you need to range check before and after the mod to insure the transmitted signal is as strong after the mod.) Personal at this point I would move onto the Spek Module hack and leave this one behind. Since I do not have possession of a new module I can not verify or update the model if the LED and switches have moved and no longer align with the lid.
I have made the jump from my DX7s to a FrSky Taranis X9D, but still need to support all the equipment and BnF aircraft I already own. The answer is a JR style Transmitter module that supports the DSM2 protocol. I have decided to give the OrangeRX version a try. Out of the box, this module has the antenna coming off to lower front of the module which can cause shadowing of the transmitter antenna. A solution, reposition the antenna to the top of the module. This also solves the other problem; as purchased it would not fit in the Taranis Transmitter case, now it does.
The antenna connector is on a short cable so repositioning is easy. Unplug, unscrew, slip it into the printed part, drill a hole at the top of the OrangeRX faceplate to pass the antenna cable through, reconnect, and put everything back together again. Works a treat.
ViaCAD, Object File, and STL files included.
One word of caution, do not sharp bend, crease, pinch ... The antenna wire. It's routing should be as straight and gentle turns as possible. It is a mini coax cable and it's characteristics and transmission power will change (lower) if you do not gently route it.
Up next will be to print a case for a custom DSM2 / DSMX module using the transmitter assembly harvested from a DX4e. This will provide native automatic DSM2 / DSMX functionality with full range (200mW instead of 100mW) transmission strength, aircraft binding through radio interface instead of a button on the back, and model match capability using true spektrum parts. The next version is for transmitters like the Taranis running the latest released version of OpenTx only as it requires special software functionality to make it work. (Other custom firmwares may work, but this is the one I will be using). If you are interested, keep an eye out for my next posting. I will include complete build instructions.
I have made the jump from my DX7s to a FrSky Taranis X9D, but still need to support all the equipment and BnF aircraft I already own. The answer is a JR style Transmitter module that supports the DSM2 protocol. I have decided to give the OrangeRX version a try. Out of the box, this module has the antenna coming off to lower front of the module which can cause shadowing of the transmitter antenna. A solution, reposition the antenna to the top of the module. This also solves the other problem; as purchased it would not fit in the Taranis Transmitter case, now it does.
The antenna connector is on a short cable so repositioning is easy. Unplug, unscrew, slip it into the printed part, drill a hole at the top of the OrangeRX faceplate to pass the antenna cable through, reconnect, and put everything back together again. Works a treat.
ViaCAD, Object File, and STL files included.
One word of caution, do not sharp bend, crease, pinch ... The antenna wire. It's routing should be as straight and gentle turns as possible. It is a mini coax cable and it's characteristics and transmission power will change (lower) if you do not gently route it.
Up next will be to print a case for a custom DSM2 / DSMX module using the transmitter assembly harvested from a DX4e. This will provide native automatic DSM2 / DSMX functionality with full range (200mW instead of 100mW) transmission strength, aircraft binding through radio interface instead of a button on the back, and model match capability using true spektrum parts. The next version is for transmitters like the Taranis running the latest released version of OpenTx only as it requires special software functionality to make it work. (Other custom firmwares may work, but this is the one I will be using). If you are interested, keep an eye out for my next posting. I will include complete build instructions.
Similar models
thingiverse
free
OrangeRx Spektrum DSM/DSM2 JR module replacement cover -- Antenna relocation by abobotek
...le's pc board in place, and a replacement cover.
no electrical parts or mods are needed - this is just a mechanical case mod.
thingiverse
free
OrangeRx DSM2/DSMX JR module replacement cover & Antenna relocation for Taranis + by moris
...ut with another design and some improvements to fit the taranis plus
the design is in 2 parts that are glued with cyano together.
thingiverse
free
OrangeRX DSMX transmitter box by ARGHtur
... frsky d8r-xp
plus it matches my lipo battery trayhttp://www.thingiverse.com/thing:949066
...maybe i should fuse them together?
thingiverse
free
OrangeRx DSM2/DSMX/DEVO JR module replacement cover & Antenna relocation for Taranis + by ecofreezy
...case mod.
edit:
the printed middle-part in the pictures is a prototype without a hole for the buzzer. the stl is final with hole
thingiverse
free
DIY Spek DSM2 / DSMX JR Module - For my Taranis & Horus by dmyers7
...ot always chasing the movement of your model and stopping the maneuver too late because of the lag in stick to servo). enjoy :-)
thingiverse
free
OrangeRX Transmitter (TX) Cover by markqv
... (tx) cover by markqv
thingiverse
a replacement orangerx, jr module cover which moves the antenna sma port to a usable position.
thingiverse
free
OrangeRX DSM2/DSMX/DEVO JR module de remplacement Antenne courte by mika1412
...tenne court pour dégager de l'espace derrière la radio et évité que l'antenne ne touche le sol lorsque la radio et pausé.
thingiverse
free
Moxon antenna 433mHz by U2fletch
...z. the mount is designed to attach to a frame/stand modified for the frsky taranis transmitter using an orangerx openlrs module.
thingiverse
free
Antenna Relocation for 9XR Pro by MORP
...work for my orange module dsm2/dsmx/walkera compatible. thus, i reduced it to the antenna part and glued it to the orignal cover.
thingiverse
free
Antenna mount for the OrangeRX OpenLRS transmitter module (JR 1W type) by j0bro
...in the right position for mounting a srh-771 (or similar 433 mhz antenna). the inside of the antenna mount...
Dmyers7
thingiverse
free
Pwr Sup Cover by dmyers7
...s7
thingiverse
cover for use to mount an on/off switch and keep little fingers from touching the 110v terminals when plugged in.
thingiverse
free
Stegosaurus Split by dmyers7
...surface and can be cleaned an sanded quite easily. glue the halves together and vapor dip for a smooth finish if you would like.
thingiverse
free
Mini Coldron by dmyers7
...#39;ve included the stl and inventor fusion file so you can add more detail or change it as you see fit. enjoy! happy halloween.
thingiverse
free
RepRap Mendal X Pulley by dmyers7
... a bit so that it is the full length of the x axis stepper drive shaft; therefore providing a truer rotation for better accuracy.
thingiverse
free
RepRap Y Pulley Upgrade by dmyers7
...on is true. unique is the second part that is glued (use a little super glue) to cap the end of the pulley and capture the belt.
thingiverse
free
Simple iPad Stand - 3D Printable by dmyers7
...s bar for joining the uprights in either panoramic or landscape orientation. see the original for the files to laser or cnc cut.
thingiverse
free
Outdoor light sensitive timer holder by dmyers7
...an be zip tied to the pole as shown. it contains a peg that allows you to slip the timer over and down into the locked position.
thingiverse
free
Remix - Pirate Dice Tower for a 200x200x135 high print surface by dmyers7
...dice tower on my prusa mendel.
thanks to tastyllama for publishing the original
support will be required to print some parts.
thingiverse
free
Battery Holder by dmyers7
... in a corner. for sides that are not in a corner i use a piece of blenderm tape glued between the box side and mounting surface.
thingiverse
free
Prusa Mendel Bed Extender (300x200mm Bed) by dmyers7
...t a larger heated bed will draw additional power so make sure your current power supply can support it.
enjoy the extended bed.
Orangerx
thingiverse
free
OrangeRX R910 Receiver by ccarrasco
...r by ccarrasco
thingiverse
orangerx r910 dsm2 9 channels receiver template.
created with designspark mechanical (file included)
thingiverse
free
OrangeRX Transmitter (TX) Cover by markqv
... (tx) cover by markqv
thingiverse
a replacement orangerx, jr module cover which moves the antenna sma port to a usable position.
thingiverse
free
DIY OrangeRX Modul to FrSky Taranis by Fliega
...y orangerx modul to frsky taranis by fliega
thingiverse
adapter für das orangerx-diy-modul 2,4 ghz für den taranis modul-schacht
thingiverse
free
OrangeRX R615X Box by keitht
...orangerx r615x box by keitht
thingiverse
smaller and 3 grams lighter than the original box.
thingiverse
free
OrangeRX R620 6 Channel Receiver by seojeff
...y seojeff
thingiverse
here's a rough model of the hobbyking orangerx 6ch receiver. use this for planning your model layouts.
thingiverse
free
50mm OrangeRx OpenLRS Receiver Mounting Plate by the-kenny
...se
this is a 50mm plate with mounting holes (m3) at 45mm distance with a mount for the orangerx openlrs receiver from hobbyking.
thingiverse
free
OrangeRX 433MHz cover
...ed to glue the pcb into the module itself with epoxy, so there is no need to have legs or extra holders to have the pcb in place.
thingiverse
free
OrangeRX TX Case by Japala
...for it. managed to get it done and for my personal use even this small reduction in height was enough to get this mounted nicely.
thingiverse
free
Taranis Cover for OrangeRX DSMX by DerKlotz74
...-adapter-kabel-rp-sma-u-fl-wlan-wifi-speedport-fritz-box-pigtail-5db-/231284121068?pt=lh_defaultdomain_77&hash=item35d99b9dec
thingiverse
free
NANO Talon - OrangeRX enclosure and dipole antenna support by raulya
...port for dipole antennas.
i created two version of the enclosure, one for vertical antenna, and the other for horizontal antenna.
Relocation
3d_export
$5
watering can
...equest i can relocate on origin on handle.<br>polygons: 30156<br>vertices: 15161<br>i hope you enjoy the model.
3d_export
$20
stylish black metal x chair
...built for long-lasting use and fold up for constant relocation and ease of seating. made for long-lasting comfort. easily...
3d_export
$110
stug iii ausf g
...ompleted 50 mm armour existed. for those, a 30 mm additional armour plate still had to be welded or bolted on until october 1943.
3d_export
$7
astronaut
... you like that model don't forget to excellent rate product as it is important for me.<br>-regards my wish -thanks.....
thingiverse
free
Extruder Relocation by ketchu13
...xed from
cr-10s extruder relocation plate and filament sensor housing by xxfreshxx
cr-10 extruder relocation bracket by wayneuk
thingiverse
free
Power switch relocation by Georgero
...witch relocation by georgero
thingiverse
20/20 power button relocation. i made this for my tronxy but can be adapted for others.
thingiverse
free
Ender 5 screen relocation
... 5 screen to lay flat on the control box while making it easier to install and maintain access to the usb and micro sd card slot.
thingiverse
free
Ender 3 Screen relocation by BogdanS96
...ns96
thingiverse
this is a mount for the ender 3 screen to be relocated on the left of the extrusion to save some lateral space.
thingiverse
free
Eachine Wizard X220S Antenna Relocation
...rd x220s antenna relocation
thingiverse
relocates the antenna to a much more crash resistant location.
print in tpu, petg or abs
thingiverse
free
Endstop X relocation bracket by dvjcodec
...rse
this simple relocation bracket is dedicated for:http://www.thingiverse.com/thing:15156http://www.thingiverse.com/thing:31021
Jr
3ddd
$1
Estilo JR
...estilo jr
3ddd
jori , estilo
кресло: estilo jr-7060
бренд:jori
3ddd
$1
Acne JR Bear
...acne jr bear
3ddd
медведь
авторская мягкая игрушка - круглый мишка acne jr
turbosquid
$30
Robot Jr
... 3d model robot jr for download as ma, c4d, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1697456)
turbosquid
$49
Les Paul Jr.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Mega Machine Jr
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Bathroom Set JR
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Les Paul Jr Guitar
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Floyd Mayweather Jr. bed
... постельное белье
floyd mayweather jr. bed
размеры: x 187см, y 238см, z 132см.
polys: 504 020
verts: 507 851
3d_export
$15
Mega Machine Jr 3D Model
...mega machine jr 3d model
3dexport
car toy wheel photorealistic racing vray model
mega machine jr 3d model eiwari 87383 3dexport
3ddd
$1
Kuppersbusch EDG 6260 JR Steamer
... пароварка
kuppersbusch edg 6260 jr steamer
hot chili edition
polys:45675
verts:48094
пароварка
Antenna
archibase_planet
free
Antenna
...chibase planet
antenna aerial television antenna
antenna kathrein n090913 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
satellite antenna
antenna 1 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
equipment satellite antenna
antenna 2 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...ntenna
archibase planet
satellite antenna equipment dish aerial
antenna 3 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
satellite antenna dish dish aerial
antenna 4 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...e planet
antenna dish dish aerial
antenna c-band satellite s180-g n210612 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
car antenna
...car antenna
3dexport
car antenna, antenna, car gadgets
turbosquid
$1
antenna
...rbosquid
royalty free 3d model antenna for download as blend on turbosquid: 3d models for games, architecture, videos. (1655786)
3d_export
free
Station with antenna
...station with antenna
3dexport
station with antenna
turbosquid
$5
Antenna
...id
royalty free 3d model antenna for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1381532)
Module
turbosquid
$4
Module
...
turbosquid
royalty free 3d model module for download as max on turbosquid: 3d models for games, architecture, videos. (1259603)
3d_export
free
Martian module
...martian module
3dexport
martian module objects 18 textures are missing
design_connected
$39
Kennedee Moduls
...kennedee moduls
designconnected
kennedee moduls computer generated 3d model. designed by massaud, jean-marie.
design_connected
$39
Sayonara Moduls
...sayonara moduls
designconnected
bbb emmebonacina sayonara moduls computer generated 3d model. designed by decursu, giorgio.
design_connected
$27
Togo Moduls
...togo moduls
designconnected
ligne roset togo moduls computer generated 3d model. designed by ducaroy, michel.
design_connected
$34
Nuvola Moduls
...nuvola moduls
designconnected
bonaldo nuvola moduls 2-seater computer generated 3d model. designed by giuseppe viganò.
3d_export
free
Hibernation module
...hibernation module
3dexport
design_connected
$27
Sabi moduls
...sabi moduls
designconnected
paola lenti sabi moduls 2-seater computer generated 3d model. designed by francesco rota.
3d_export
$50
pls concrete module
...pls concrete module
3dexport
pls concrete module<br>pls with concrete mobile mixer module m5
turbosquid
free
Hibernation module
...squid
free 3d model hibernation module for download as blend on turbosquid: 3d models for games, architecture, videos. (1667696)