OpenRC TRuggy HSPr

Last crawled date: 1 year, 11 months ago

This is a remix of the OpenRC Truggy by Daniel Noree. It uses driveline parts (differentials, motor plate, center gear, dogbones, etc) from HSP RC cars. These parts are inexpensive and available on Amazon and AliExpress. Some of the printed parts are the same as the original Truggy, but most are tweaked to accommodate the HSP components.

In addition to the standard components required by the Truggy, You will need to order these HSP parts:

HSP#, QTY, Description, (Notes)
02024, 2, Differential
02030, 1, Front pinion and shaft, (Comes with C clip to hold pinion gear on)
03015, 1, Rear pinion and shaft
03007, 1, motor plate
04003, 1, center drive shaft
11184, 1, Main Gear, (64T)
11181, 1, Motor Gear, (11119 is 17T, 11181 is 21T)
02016, 2, Drive Cup
02033, 4, Axle Stub
12007, 4, 100mm dog bone, (Goes by brand HSP or RedCat)

These parts are also needed for the build. You can order these HSP parts, but you may choose to buy other equivalent parts:

HSP#, QTY, Description, (Notes)
02055, 4, Nylon Lock Nut M4, (For the wheels. Get the crappy looking black ones, they hold better than the pretty anodized ones)
02038, 13, Ball Head Screw 6mm
02138, 8, Bearing 15x10x4mm, (Sold in packs of 6, one on each wheel, two in each diff)
02139, 9, Bearing 10x5x4mm, (Sold in packs of 2 or 8, one on each wheel, two in each diff, one on the motor plate)
08027, 5, Pin 2x10mm, (one in each wheel and one for the main gear)
06002, 4, Spring and Shock Absorber, (also goes by number 106004)
02053, 4, Body clips
08010N, 4, Wheel and Tire, (Sold in packs of 2, Only buy this if you don't want to print the wheels)

Standard Truggy Parts:

QTY, Description, (Notes)
4, Bearing 12x6x4mm (for the Steering. Search for "bearing 12x6x4")
4, Inner Wishbone Pin 3x56mm, (cut from a 300mm rod, search for "3mm x 300mm rod" )
4, Outer Wishbone Pin 3x31mm, (also cut from a 300mm rod)

Other stuff U need:
Radio and receiver (I like the Flysky FS-GT2)
Steering Servo (Search for "standard servo")
540 size Motor and ESC (Search for "brushless 540 motor and esc")
2S Lipo battery (Search for "Turnigy 2200mAh 2S 20C Lipo Pack")
Charger (Search for "2S LiPo Charger")
RC Sticky tape (Search for "Double Sided Clear Servo Tape")
Body (I rock an HSP body (of course lol). Search for "hsp 94111 body")

Some tools you should buy!
Park tool: HSP 80132
Little wrenches:
https://www.amazon.com/Zenith-Industries-ZN502010-Double-5mm-11mm/dp/B00HVLELSI/ref=sr_1_8?crid=2TU6IPE6KY3D7&keywords=5.5mm+wrench&qid=1572669573&sprefix=5.5%2Caps%2C280&sr=8-8

Hex Bits:
https://www.amazon.com/gp/product/B00FA4RI9W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Hand tap:
https://www.amazon.com/gp/product/B0736T5NM6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Metric drill bits:
https://www.amazon.com/gp/product/B071ZRMWBN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Good luck, let's fire up them printers!

Links to some videos of my Truggy!
https://youtu.be/A5M8prYqbYM

https://youtu.be/mmi5klbRuJ0

Edits:
2020.04.30 Version 2.0!
Updated the suspension components based on my drive-break-redesign cycles. Here is what I changed:

Wishone: New two piece design does not use the pressed-in 2mm outer pin. instead it is a captive 3mm pin,like the inner wishbone pin. this should be stronger and also much easier to service in the field. The new wishbone is also thicker and you only have to replace half if it breaks. Also it centers the C-hubs on the wishbone, which increases the wheelbase and makes the dogbone move more smoothly through the suspension travel.

C-hubs: new style mates to the new wishbone and to has a 6mm balljoint at the top instead of the M3 screw. The rears also feature a 3 degree toe-in which looks a little goofy but really increases high speed stability. No more constant fishtailing!

Steering linkage: Slightly increased the length to 55mm due to the steering block moving slightly forward.

Version 2.0 upgrade notes: You should totally upgrade to version 2.0 if you already printed the original version. Handles way better! This new version can be retrofitted to an existing V1.0 by printing/installing these new parts:
Wishbone Big Part (4x)
Wishbone Small Part (4x)
6mm Linkage 55mm (2x replaces the steering linkages)
6mm Linkage 75mm (4x replaces the turnbuckles)
C-Hub, Left Front (1x)
C-Hub, Right Front (1x)
C-Hub, Left Rear, With Toe-in (1x)
C-Hub, Right Rear, With Toe-in (1x)

...also you will need 8x more of the 02038 6mm ball head screws and you will need to make 4x Outer Wishbone Pin 3x31mm.

2019.11.27:
Wishbone_v3
Changed the wishbone print helpers again to use less plastic and detach easier

2019.11.17:
Wishbone_v2
Steering_Block_v2
C-Hub_Rear_v2
Changed the bearing pocket sizes in the steering block and rear C-hub based on feedback from jritt187 (thanks!). They were oversized at 10.6mm and 15.6mm. Now they are 10.2mm and 15.2mm. Also added print helper to the wishbone and reoriented it to print like the original Truggy wishbone.