Thingiverse
OpenRC F1 Front Suspension (Updated V2) by rhoagland
by Thingiverse
Last crawled date: 3 years ago
Description
Front shock absorbers (dampers) for Daniel's awesome F1 car!
V2 Updated Design!
I have been trying to come up with a more functional alternative for the NinjaFlex dampers in my suspension design. (They just weren't soft enough)
As I was changing batteries in one of my kids toys I noticed the little conical springs inside the battery compartment and I knew I had the solution! I can now say that this design works FANTASTIC!
By adding a recessed area to the hubs I was able to fit a longer spring from an AAA battery terminal over the guide bushings and allow the full travel I was looking for. The new attached pictures show the unassembled view with the new spring, the battery terminals I used, and the suspension both uncompressed and compressed.
The springs I used were from these battery terminals:
Keystone Electronics 5204 Contacts; Battery Spring Contacts; Negative Spring Contact with Tab, AAA, N (5 pieces)
http://www.amazon.com/gp/product/B00LPP7NZ4
I also uploaded a video to YouTube demonstrating how it works. https://youtu.be/YGE2oiwUV90
And posted a driving demo with all 3 of my designs installed on the car: https://youtu.be/g154r7Dcjas
Front Suspension: http://www.thingiverse.com/thing:1455120
Rear Suspension: http://www.thingiverse.com/thing:1455132
Standard F1 Rubber Tire Adapters: http://www.thingiverse.com/thing:1337521
By adding small NinjaFlex dampers to the rigid frame of the F1 car I was able to reduce some of the bounce and vibration of the front of the vehicle as well as allow a small amount of body roll to aid in cornering.
The front upper and lower control arms have been modified to allow a sliding pivot to be attached to the wheel hubs. Next the wheel hubs themselves were shortened vertically to allow for the placement of NinjaFlex (or possibly other materials) flexible spacers to act as small shock absorbers.
I printed the spacers out of NinjaFlex using a single layer on all sides to make them as soft as possible. (.2mm layer height and .4mm nozzle) Thinner would be better if you have a smaller nozzle. The key is to make them as soft as possible.
Instructions:
Print the following:
1x Front_Upper_BOM_Suspension
1x Front_Lower_BOM_Suspension
2x Front_Wheel_Hub_Suspension (One needs to be mirrored for the opposite side of the car.)
4x OpenRC F1 Guide Bushing
2x Front_Rim_Narrow (If you aren't using the rubber tires/wheels)
2x Front_Wheel_Narrow (In NinjaFlex if you aren't using the rubber tires/wheels)
Assemble as normal replacing BOM parts. Thread a Guide Bushing on each new longer screw and thread it into the Front_Wheel_Hub on each side. The smaller side of each hub faces up and gets one of the suspension spacers between it and the Upper_BOM. Use the photo above to help with assembly if necessary.
I would welcome others to design a better/softer damper or experiment with other materials. Small springs would probably work very well as well but I wanted to keep with the 3d-printed concept. This is an excellent project and I'm proud to be able to contribute.
If anyone has problems being able to mirror the part "Front_Wheel_Hub_Suspension" I can mirror it and upload another .stl file, just let me know.
Front shock absorbers (dampers) for Daniel's awesome F1 car!
V2 Updated Design!
I have been trying to come up with a more functional alternative for the NinjaFlex dampers in my suspension design. (They just weren't soft enough)
As I was changing batteries in one of my kids toys I noticed the little conical springs inside the battery compartment and I knew I had the solution! I can now say that this design works FANTASTIC!
By adding a recessed area to the hubs I was able to fit a longer spring from an AAA battery terminal over the guide bushings and allow the full travel I was looking for. The new attached pictures show the unassembled view with the new spring, the battery terminals I used, and the suspension both uncompressed and compressed.
The springs I used were from these battery terminals:
Keystone Electronics 5204 Contacts; Battery Spring Contacts; Negative Spring Contact with Tab, AAA, N (5 pieces)
http://www.amazon.com/gp/product/B00LPP7NZ4
I also uploaded a video to YouTube demonstrating how it works. https://youtu.be/YGE2oiwUV90
And posted a driving demo with all 3 of my designs installed on the car: https://youtu.be/g154r7Dcjas
Front Suspension: http://www.thingiverse.com/thing:1455120
Rear Suspension: http://www.thingiverse.com/thing:1455132
Standard F1 Rubber Tire Adapters: http://www.thingiverse.com/thing:1337521
By adding small NinjaFlex dampers to the rigid frame of the F1 car I was able to reduce some of the bounce and vibration of the front of the vehicle as well as allow a small amount of body roll to aid in cornering.
The front upper and lower control arms have been modified to allow a sliding pivot to be attached to the wheel hubs. Next the wheel hubs themselves were shortened vertically to allow for the placement of NinjaFlex (or possibly other materials) flexible spacers to act as small shock absorbers.
I printed the spacers out of NinjaFlex using a single layer on all sides to make them as soft as possible. (.2mm layer height and .4mm nozzle) Thinner would be better if you have a smaller nozzle. The key is to make them as soft as possible.
Instructions:
Print the following:
1x Front_Upper_BOM_Suspension
1x Front_Lower_BOM_Suspension
2x Front_Wheel_Hub_Suspension (One needs to be mirrored for the opposite side of the car.)
4x OpenRC F1 Guide Bushing
2x Front_Rim_Narrow (If you aren't using the rubber tires/wheels)
2x Front_Wheel_Narrow (In NinjaFlex if you aren't using the rubber tires/wheels)
Assemble as normal replacing BOM parts. Thread a Guide Bushing on each new longer screw and thread it into the Front_Wheel_Hub on each side. The smaller side of each hub faces up and gets one of the suspension spacers between it and the Upper_BOM. Use the photo above to help with assembly if necessary.
I would welcome others to design a better/softer damper or experiment with other materials. Small springs would probably work very well as well but I wanted to keep with the 3d-printed concept. This is an excellent project and I'm proud to be able to contribute.
If anyone has problems being able to mirror the part "Front_Wheel_Hub_Suspension" I can mirror it and upload another .stl file, just let me know.
Similar models
thingiverse
free
OpenRC F1 Enzo Mod Wheel by levenimc
...real enzo wheels. the profile of the tire is similar and the shape of the wheel itself is very...
cults
free
Wheels for OpenRC F1 for F104 tires and differential
...//www.thingiverse.com/thing:2361718
if you don't want to run with a differential you can print two of the left rear instead.
thingiverse
free
Wheels for OpenRC F1 for F104 tires and differential. by tahustvedt
...://www.thingiverse.com/thing:2361718
if you don't want to run with a differential you can print two of the left rear instead.
thingiverse
free
OpenRC F1 Lego Tire Wheel by xamith
...cklink
uses original bearings for front wheel and same wheel nuts for both.
the body pictured is jason suter's ossum racerod
thingiverse
free
OpenRC F1 Standard Rubber Tire Adapters by rhoagland
...the wheels and glue them with ca glue or similar fill the gap with a foam insert of your...
thingiverse
free
OpenRC -> RC18 wheel adapter by AustinDavid
... spacer on the outside, the hub adapter on the inside, and slide it onto your axle
6) tighten it up with the original nylock nut.
thingiverse
free
OpenRC F1 Tamiya Wheel Axle by chitchc2
... by chitchc2
thingiverse
the extended axles allow the hubs to properly lock when using the tamiya tire rims posted by adrenaflo.
thingiverse
free
OpenRC F1 2017 Front Chassis by Drazen
...modified openrc f1 front chassis. -added feature for s-duct similar to many 2017 cars (use with my modified nose)...
thingiverse
free
OpenRC F1 eBay Wheel Rims by bizzehdee
...-flat-racing-4pcs/402536472722
tire od: 64mm.
tire id/rim od: 52mm.
tire/rim width: 26mm
remixed from the original openrc f1 rims
thingiverse
free
OpenRC F1 Battery Tray by CitrusMaximus
...hold the electronics in my openrc f1 car.
here is a video to the full build that showcases the tray.
https://youtu.be/6buli6yqdsu
Rhoagland
thingiverse
free
F1 Friction Damper by rhoagland
... damper by rhoagland
thingiverse
friction damper for use on openrc and hpd f1 cars.
mounting holes are designed for m3 hardware.
thingiverse
free
Gear Bearing Fidget Spinner by rhoagland
...s able to combine the two designs in the remix to create a fully-printable geared fidget spinner. just add bearings for weights.
thingiverse
free
Funny Spider Body Attachment Bolt by rhoagland
...shop. i found that the ones from the original were too long so i shortened them.
2 are required instead of "bolt_1".
thingiverse
free
The 30-Cent Fidget Spinner (No Bearings Required) by rhoagland
...glue to hold the caps on and encapsulate the nickels inside.
youtube link: https://www.youtube.com/watch?v=8hjpunvqmgk&sns=em
thingiverse
free
OpenRC F1 Standard Rubber Tire Adapters by rhoagland
...serts)http://www.hobbyking.com/hobbyking/store/__65465__sweep_sw_f1rm_1_10_formula_1_rear_tires_v2_medium_2pcs_with_inserts_.html
thingiverse
free
OpenRC F1 Rear Suspension by rhoagland
...enjoy!
8/23/16 - added rear chassis with original mounting holes as requested. (chassis rear_suspension_with_original_holes.stl)
thingiverse
free
OpenRC F1 Independent Front Suspension Mod! by intoxikated
...be tuned slightly. this mod works best together with rhoagland#39;s rear suspension modhttps://www.thingiverse.com/thing:1455132 please read the parts list.rtf file...
thingiverse
free
OPENRC F1 front and rear Foam tire adapters by Superclodbuster
...f103 wheels and also the front suspension conversion from rhoagland https://www.thingiverse.com/thing:1455120 the narrow fronts will work on the standard...
thingiverse
free
OpenRC F1 direct steering system by Rabenauge
...some options. my car has the front suspension from rhoagland it is ths one: https://www.thingiverse.com/thing:1455120 we need for this...
Openrc
thingiverse
free
Battery holder for OpenRC by Wiero
...battery holder for openrc by wiero
thingiverse
battery holder for openrc
thingiverse
free
Front Wing OpenRC F1 by scarpantes
...front wing openrc f1 by scarpantes
thingiverse
front wing openrc f1
thingiverse
free
OpenRC f1 GoPro Mount by iClint
...openrc f1 gopro mount by iclint
thingiverse
pov mount for openrc f1 car
thingiverse
free
OpenRC F1 Bushings by rbrutsky
...openrc f1 bushings by rbrutsky
thingiverse
rear 12x18x4 bushings for the openrc formula 1 car. you must scale the bushings x10
thingiverse
free
OpenRC Truggy Trailer by Steamerzone
...verse
openrc truggy trailer with working suspension. the white suspension parts in the pictures are printed with taulman bridge.
thingiverse
free
Wall mount OpenRC F1 horizontal
...wall mount openrc f1 horizontal
thingiverse
this is a wall mount for the openrc f1 car in a horizontal position.
thingiverse
free
OpenRC Wheel Nut Wrench by barspin
...openrc wheel nut wrench by barspin
thingiverse
wheel nut wrench for the 1:10 openrc project cars.
thingiverse
free
OpenRC Tractor Trailer by Merikisseli
...openrc tractor trailer by merikisseli
thingiverse
...
thingiverse
free
OpenRC Logo by SSwede
... logo, i haven't made the logo, just the 3d model and i'm uploading it by request.
feel free to use it anyway you like :)
thingiverse
free
Bumper/Skidplate for the OpenRC Truggy by Steamerzone
...nted the plate in abs and the damper in taulman bridge. it uses existing holes/mounting points of the openrc truggy for mounting.
F1
3d_export
free
f1
...f1
3dexport
model 3d f1
3d_export
$5
mercedes f1
...mercedes f1
3dexport
racing car mercedes f1
3ddd
$1
McLaren F1
...mclaren f1
3ddd
mclaren f1 без текстур.
3d_ocean
$25
RC F1
...rc f1
3docean
auto car control f1 formula race rc remote speed
remote control f1 car
3d_export
$7
f1 toy
...f1 toy
3dexport
this is a f1 car toy representative of mexcan artists.
3d_export
$15
f1 car mercedes
...f1 car mercedes
3dexport
f1 racing f1 car mercedes
3d_ocean
$19
F1 Tractor
...f1 tractor
3docean
f1 futuristic race tractor red tractor
simple futuristic race tractor model.
3d_ocean
$30
Formula F1
...ic f1 formula indianapolis indy luxury muscle race racer sedan sports street transport tuner vehicle
generic formula f1 race car.
3d_ocean
$50
McLaren F1
...uxury mc mclaren muscle race sedan sports street transport tuner vehicle
highly detailed exterior and interior of the mclaren f1.
turbosquid
$100
F1 Car
...
turbosquid
royalty free 3d model f1 car for download as obj on turbosquid: 3d models for games, architecture, videos. (1263925)
Suspension
3ddd
free
Circolo Suspension
...circolo suspension
3ddd
circolo , suspension
this is the circolo led suspension
3d_export
$20
suspension
...pension
3dexport
suspension it is used in bicycle, motorcycle; and many more object<br>rendering is done in photo view 360
3ddd
$1
Fieltebek suspension
...fieltebek suspension
3ddd
fieltebek , suspension
fieltebek
3d_export
free
suspension
...suspension
3dexport
3ddd
$1
Botti Suspension
...botti suspension
3ddd
botti
люстра botti suspension
turbosquid
$25
suspension
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
suspension
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
SUSPENSION
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
DELIGHTFULL MATHENY | SUSPENSION
... matheny , suspension
delightfull matheny | suspension
design_connected
$16
Vaeder Suspension
...vaeder suspension
designconnected
modular lighting instruments vaeder suspension computer generated 3d model.
V2
3d_export
free
Lamp v2
...lamp v2
3dexport
lamp v2 with solar panel
3d_export
$5
hammerhead v2
...hammerhead v2
3dexport
razer hammerhead v2 headphones, modeled in cinema 4d, render in corona
3d_export
$5
manometer v2
...manometer v2
3dexport
3d_export
$5
potato v2
...potato v2
3dexport
turbosquid
$52
Lifebuoys v2
...squid
royalty free 3d model lifebuoys v2 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1560870)
turbosquid
$2
Mask v2
...turbosquid
royalty free 3d model mask v2 for download as stl on turbosquid: 3d models for games, architecture, videos. (1527741)
turbosquid
free
Flashlight V2
...d
free 3d model flashlight v2 for download as , obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1663559)
turbosquid
$29
Thanos v2
...
royalty free 3d model thanos v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1651077)
turbosquid
$29
Titan v2
...d
royalty free 3d model titan v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1540228)
turbosquid
$29
Frieza v2
...
royalty free 3d model frieza v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1701238)
Updated
turbosquid
$5
orthographic room (updated)
...ee 3d model orthographic room (updated) for download as blend on turbosquid: 3d models for games, architecture, videos. (1375451)
turbosquid
$95
Romantic Bedroom - Updated
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Sofa. Updated release
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Procedurally updating cartoon crystal
...l procedurally updating cartoon crystal for download as blend on turbosquid: 3d models for games, architecture, videos. (1525853)
3d_export
$5
10 Surfboard s UPDATE
...10 surfboard s update
3dexport
3d_export
$10
chair updated rocking
...chair updated rocking
3dexport
armchair renewed plywood 18 mm. for cnc machines. layout in the stp archive.
turbosquid
free
Marble Table Updated
...el marble table for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1201300)
turbosquid
$35
Mauser 1930the model is updated with the kits
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$145
Contemporary Bedroom Collection Vol 1 - Updated
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$16
B&B Mart Armchair MPRN (Updated)
...art armchair mprn (updated) for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1284355)
Front
archibase_planet
free
Front
...front
archibase planet
facade front bluff
front 3d01a - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
front fork
...front fork
3dexport
front fork
3d_export
$5
Front Desk
...front desk
3dexport
modern and minimal reception front desk
3d_ocean
$4
Medical Front
...medical front
3docean
horror low medical
medical front
3d_ocean
$5
Front Desk
...front desk
3docean
desk front office reception
office reception counter or front desk. cad file and obj file included.
3ddd
free
Axor WaterDream by Front
...r , waterdream , front
axor waterdream by front
3d_export
$5
front nut eye
...front nut eye
3dexport
front nut eye
3d_export
$5
front screw eye
...front screw eye
3dexport
front screw eye
3d_export
$5
front clamping device
...front clamping device
3dexport
front clamping device
archive3d
free
Front 3D Model
...rchive3d
facade front bluff
front 3d01a - 3d model (*.gsm+*.3ds) for interior 3d visualization.