Thingiverse
OpenRC 4WD Truggy Compatible Shocks by KENisFIS
by Thingiverse
Last crawled date: 2 years, 12 months ago
PLEASE ROTATE 90 Deg. on the X axis before printing. Sorry I didn't adjust that yet.
Purchased the springs and the aluminium rods from my local Lowes. For a set of 2 shocks you need 1 rod(they come in a 3 pack) cut it into 2 parts [i will replace this text with the length of the cut rods]. The wishbone arm connection side will be very tight and hold the rod firm. Use force to get it to hit the bottom of it's opening. The top has a series of slots inside for the lubricant that you may decide to use. Fill it before you place the rod into the top. Any questions, feel free to ask
Purchased the springs and the aluminium rods from my local Lowes. For a set of 2 shocks you need 1 rod(they come in a 3 pack) cut it into 2 parts [i will replace this text with the length of the cut rods]. The wishbone arm connection side will be very tight and hold the rod firm. Use force to get it to hit the bottom of it's opening. The top has a series of slots inside for the lubricant that you may decide to use. Fill it before you place the rod into the top. Any questions, feel free to ask
Similar models
grabcad
free
Shock absorbers
...nting a 3d cad model of cutting-edge shock absorber in solidwork.
it's components are:-
1. top rod
2. base
3. spring
4. nut
thingiverse
free
Bar Clamp Rod Adapter by CodeCreations
... rod on top of another board before you clamp it down. this will support the rod all the way to the end where you're cutting.
thingiverse
free
Prusa i3 Single Frame Spool Holder by Mak-a-face
...es can be cut to any length you want, within reason. threaded rod could be used on the sides but i won't use them on the top.
thingiverse
free
SV650 battery box by 5tuTown95
...shocks also as i have left lots of room for the shock reservoir, fitment will depend on how much of the battery box you cut away.
thingiverse
free
Fishing Rod Holder (Storage Rack) by dextergiii
...g on how it was mounted). once the rod-tip is in place the shock-cord will apply pressure to keep the tip in one of the notches.
thingiverse
free
Hex Cut Bottle by cerberus333
...hing:65624
you can do so or use a different method
(edit the g-code to eliminate the top. or stop printing before
the top layers)
grabcad
free
Shock Absorber
...rts like spring, bump stop, lower shock, upper shock, sleeve, bushings, and piston rod.
i hope you will like it.
designed in nx
thingiverse
free
Wall mount M8 rod holder by pipshag
...rod. fastened in wood cabinet with m3 screws.
cut or use a whole m8 rod. add nyloc nuts as ends. mount holder with 2 x m3 screws.
thingiverse
free
Dock Fishing Rod Handle by LiamKelly125
...od or reel doesn't really matter it just matters if your rod is the male end of the rod. almost any two part rod should work.
thingiverse
free
Cylindrical rod/tube cutting jig, mounted on 2040 extrusions by hyperair
...ltabot, so i made these. they were made in a hurry, so it's not perfectly parametric, but should be pretty easy to customize.
Truggy
thingiverse
free
Truggy by Ofuji
...by ofuji
thingiverse
peças do truggy com pequenas modificações para adaptar a engrenagens metálicas de baixo custo do aliexpress
thingiverse
free
OpenRC Truggy Rollcage Überrollbügel / Versteifung by Madde007
...truggy rollcage überrollbügel / versteifung by madde007
thingiverse
rollcage for openrc truggy
reinforcement for the truggy body
thingiverse
free
ACME Truggy saver by DIYhans
...acme truggy saver by diyhans
thingiverse
c87 - servo saver part 3
this steering part is for the acme raptor truggy.
thingiverse
free
SCX10 hilux truggy grill by imperfect927
...scx10 hilux truggy grill by imperfect927
thingiverse
scx10 hilux truggy grill
thingiverse
free
OpenRC Truggy Trailer by Steamerzone
...verse
openrc truggy trailer with working suspension. the white suspension parts in the pictures are printed with taulman bridge.
thingiverse
free
Open RC Truggy wing holder by patas66
...open rc truggy wing holder by patas66
thingiverse
strong wing holder for open rc truggy and openrc 1:10 rc truggy wing
thingiverse
free
Bumper/Skidplate for the OpenRC Truggy by Steamerzone
...nted the plate in abs and the damper in taulman bridge. it uses existing holes/mounting points of the openrc truggy for mounting.
thingiverse
free
1/18 truggy wheel by Albebert
...1/18 truggy wheel by albebert
thingiverse
just a simple wheel for my anderson mb4 1/10 truggy.
thingiverse
free
Truggy 4s battery holder by dolefi
...cross member of the truggy with apropriate spacers so that it clears the central diff.
it even fits under the truggy hotrod body
thingiverse
free
HPI Trophy Truggy Front Lights by buzdaman
...hpi trophy truggy front lights by buzdaman
thingiverse
hpi trophy truggy front lights
Openrc
thingiverse
free
Battery holder for OpenRC by Wiero
...battery holder for openrc by wiero
thingiverse
battery holder for openrc
thingiverse
free
Front Wing OpenRC F1 by scarpantes
...front wing openrc f1 by scarpantes
thingiverse
front wing openrc f1
thingiverse
free
OpenRC f1 GoPro Mount by iClint
...openrc f1 gopro mount by iclint
thingiverse
pov mount for openrc f1 car
thingiverse
free
OpenRC F1 Bushings by rbrutsky
...openrc f1 bushings by rbrutsky
thingiverse
rear 12x18x4 bushings for the openrc formula 1 car. you must scale the bushings x10
thingiverse
free
OpenRC Truggy Trailer by Steamerzone
...verse
openrc truggy trailer with working suspension. the white suspension parts in the pictures are printed with taulman bridge.
thingiverse
free
Wall mount OpenRC F1 horizontal
...wall mount openrc f1 horizontal
thingiverse
this is a wall mount for the openrc f1 car in a horizontal position.
thingiverse
free
OpenRC Wheel Nut Wrench by barspin
...openrc wheel nut wrench by barspin
thingiverse
wheel nut wrench for the 1:10 openrc project cars.
thingiverse
free
OpenRC Tractor Trailer by Merikisseli
...openrc tractor trailer by merikisseli
thingiverse
...
thingiverse
free
OpenRC Logo by SSwede
... logo, i haven't made the logo, just the 3d model and i'm uploading it by request.
feel free to use it anyway you like :)
thingiverse
free
Bumper/Skidplate for the OpenRC Truggy by Steamerzone
...nted the plate in abs and the damper in taulman bridge. it uses existing holes/mounting points of the openrc truggy for mounting.
4Wd
3d_export
$14
4WD Safari 3D Model
...4wd safari 3d model
3dexport
4wd four wheel drive vehicle offroad off road
4wd safari 3d model zarday321 646 3dexport
turbosquid
$199
Otokar Cobra 4WD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$55
Lancia Fulvia HF 4WD concept
...ee 3d model lancia fulvia hf 4wd concept for download as wire on turbosquid: 3d models for games, architecture, videos. (1310343)
3d_export
free
Download free Crossy Car 4WD 3D Model
...download free crossy car 4wd 3d model
3dexport
car vehicles cartoon minecraft
crossy car 4wd 3d model makeitinc 93352 3dexport
turbosquid
$6
Concept Suv 4x4 4wd City and land
...suv 4x4 4wd city and land for download as 3ds, obj, and blend on turbosquid: 3d models for games, architecture, videos. (1190058)
3d_export
$99
Toyota Celica 4wd st185 19901993 3D Model
...r gt-four gt4 gt-4 4wd rally sport racing 1991 1992 1993 1994 1995
toyota celica 4wd st185 19901993 3d model squir 59455 3dexport
turbosquid
$89
HD PICKUP TRUCK CHASSIS 4WD IFS
...chassis 4wd ifs for download as max, blend, fbx, obj, and 3ds on turbosquid: 3d models for games, architecture, videos. (1652497)
cg_studio
$99
Toyota Celica 4wd st185 1990-19933d model
...fbx .lwo .max .obj - toyota celica 4wd st185 1990-1993 3d model, royalty free license available, instant download after purchase.
humster3d
$75
3D model of Mitsubishi Delica Star Wagon 4WD 1986
...of mitsubishi delica star wagon 4wd 1986 in various file formats. all our 3d models were created maximally close to the original.
3d_export
$23
3D TAMIYA MINI 4WD SONIC MAGNUM AVANTE CAR TOY
...rque gives more acceleration and allows the car to better withstand the difficulties of climbing slopes or running through turns.
Shocks
3d_export
$10
Shock Absorber
... energy (typically heat); usually consists of a combination of a spring and a dashpot; most shock absorbers are a form of dashpot
3d_export
$5
shock absorber
...shock absorber
3dexport
3d printable shock absorber can also provide .stp or .iges format if required
3d_export
$5
shock absorber inflator
...shock absorber inflator
3dexport
shock absorber inflator
turbosquid
$5
shock absorber
...osquid
royalty free 3d model shock absorber for download as on turbosquid: 3d models for games, architecture, videos. (1474521)
turbosquid
$10
Shock absorber
...uid
royalty free 3d model shock absorber for download as c4d on turbosquid: 3d models for games, architecture, videos. (1266562)
3d_export
free
motorcycle shock absorber
...motorcycle shock absorber
3dexport
motorcycle shock absorber 267 mm
turbosquid
$1
Shock Absorber
... free 3d model shock absorber for download as sldpr and sldas on turbosquid: 3d models for games, architecture, videos. (1240883)
3d_export
$25
Shock absorber
...rber it can also be used in the following files: . autocad (.dwg) . blender(.blend) . step(.stp) . dxf(.dxf) . autodesk fbx(.fbx)
turbosquid
$30
Shock Absorber
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
shock absorber
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Compatible
turbosquid
$3
Genesis 8 Clothing 1 dForce Compatible
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Genesis 8 Clothing Top 1 dForce Compatible
...nesis 8 clothing top 1 dforce compatible (2) for download as on turbosquid: 3d models for games, architecture, videos. (1217671)
turbosquid
$50
Screwdriver Latch Type CSC Torx compatible with Straumann
...sc torx compatible with straumann for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1370064)
3d_export
$9
cad compatible casual woman hand model f1p3d1v1hand
...s: stl, obj, fbx<br>models with quad-topology (1100 quads) are also included (f1p3d1v1hand_quad.obj, f1p3d1v1hand_quad.fbx)
3d_export
$38
uzaki rigify
...uzaki rigify 3dexport compatible-blender ...
3d_export
$5
cloud lowpoly 3d
...cloud lowpoly 3d 3dexport lowpoly 3d format fbx compatible with unreal and...
3d_export
$5
flower lowpoly 3d
...flower lowpoly 3d 3dexport lowpoly 3d format fbx compatible with unreal and...
3d_export
$5
rocks lowpoly 3d
...rocks lowpoly 3d 3dexport lowpoly 3d format fbx compatible with unreal and...
3d_export
$10
pots
...pots
3dexport
pots<br>modeled in blender<br>compatable with evee and cycels
3d_ocean
$95
Mr Techny
...for 3ds max 2010 and later – biped (2010 compatible and cat (2011 compatible) versions incluided. for maya 2012...