GrabCAD
OpenFish
by GrabCAD
Last crawled date: 1 year, 11 months ago
OpenFish is a soft robotic fish optimized for speed after multiple design and prototyping iterations. It is made open source with the intention of serving as an inspiration for future developments. Further improvements are certainly possible and much needed especially regarding durability. For more information on the design, fabrication, and performance of the fish, please refer to our paper: "OpenFish: Biomimetic Design of a Soft Robotic Fish for High Speed Locomotion" (https://arxiv.org/abs/2108.12285)
Overview of off-the-shelf components in the gearbox assembly:
- 9.7:1 metal gearmotor 25Dx48L mm HP 12V motor
- 4x4mm motorshaft coupling
- gear 20T M0.5
- 2x delrin spur gear M0.5 50T
- 2L-gearbox Huco 323.31.2
- 6x flat teflon washer M5
- 3x spacer nut
- 2x push rod connector
- bearing
- adhesive weights
- steel braided fishing line
Files for silicone casting:
- Roboti_fish_proto - skin-1.STL
Files for lasercutting:
- Roboti_fish_proto - lasercut_pushrod_connector_plate-1.STL
- Roboti_fish_proto - lasercut_pushrod_connector_plate-2.STL
- Roboti_fish_proto - lasercut_tail_sheets-1.STL
- Roboti_fish_proto - nitril_rubber_seal-1.STL
- Roboti_fish_proto - flatter_topholder-1.STL
- Roboti_fish_proto - flatter_topholder-2.STL
Files for Fused Deposition Modeling (FDM, all PLA):
- Roboti_fish_proto - top_head_hole_m8-1.STL
- Roboti_fish_proto - bottomhead_longer-2.STL
- Roboti_fish_proto - firstrib-1.STL
- Roboti_fish_proto - middle_rib2-1.STL
- Roboti_fish_proto - middle_rib3-1.STL
- Roboti_fish_proto - lastrib-1.STL
- Roboti_fish_proto - Gear_assembly_mount-2.STL
- Roboti_fish_proto - motor_mount-1.STL
- Roboti_fish_proto - side_fins-1.STL
- Roboti_fish_proto - tail_L-1.STL
- Roboti_fish_proto - top_fins-1.STL
- Roboti_fish_proto - bearing_mount-1.STL
Overview of off-the-shelf components in the gearbox assembly:
- 9.7:1 metal gearmotor 25Dx48L mm HP 12V motor
- 4x4mm motorshaft coupling
- gear 20T M0.5
- 2x delrin spur gear M0.5 50T
- 2L-gearbox Huco 323.31.2
- 6x flat teflon washer M5
- 3x spacer nut
- 2x push rod connector
- bearing
- adhesive weights
- steel braided fishing line
Files for silicone casting:
- Roboti_fish_proto - skin-1.STL
Files for lasercutting:
- Roboti_fish_proto - lasercut_pushrod_connector_plate-1.STL
- Roboti_fish_proto - lasercut_pushrod_connector_plate-2.STL
- Roboti_fish_proto - lasercut_tail_sheets-1.STL
- Roboti_fish_proto - nitril_rubber_seal-1.STL
- Roboti_fish_proto - flatter_topholder-1.STL
- Roboti_fish_proto - flatter_topholder-2.STL
Files for Fused Deposition Modeling (FDM, all PLA):
- Roboti_fish_proto - top_head_hole_m8-1.STL
- Roboti_fish_proto - bottomhead_longer-2.STL
- Roboti_fish_proto - firstrib-1.STL
- Roboti_fish_proto - middle_rib2-1.STL
- Roboti_fish_proto - middle_rib3-1.STL
- Roboti_fish_proto - lastrib-1.STL
- Roboti_fish_proto - Gear_assembly_mount-2.STL
- Roboti_fish_proto - motor_mount-1.STL
- Roboti_fish_proto - side_fins-1.STL
- Roboti_fish_proto - tail_L-1.STL
- Roboti_fish_proto - top_fins-1.STL
- Roboti_fish_proto - bearing_mount-1.STL
Similar models
grabcad
free
Custom flipped FRC gearbox "Blitz"
...eed: 16.58 ft/s
adjusted speed: 13.43 ft/s
weight: tbd
free and adjusted based on a 154 pound robot with 6" diameter wheels
grabcad
free
2-speed planetary gearbox
...s gearbox is under construction. in the future i plan to change the gear ratio of the first speed to 2: 1 second gear direct 1: 1
grabcad
free
FRC Double Speed Gearbox 7.5:1/12:1
... speed gearbox 7.5:1/12:1
grabcad
frc double speed gearbox
-high gear - 7.5:1
-low gear - 12:1
-2 falcon motor
-1/2 in hex shaft
grabcad
free
Custom single speed double reduction gearbox
...that i designed start to finish. it looks very similar to the wcp gearboxes and that was a total...
grabcad
free
Gearbox
...
a gearbox project, meant to have 2 gears and 2 pinions. gears and pinions were calculated and designed to reduce input speed x3.
grabcad
free
2 CIM Gearbox - Rev 1
...2 cim gearbox - rev 1
grabcad
my first revision of a 2 cim single-speed gearbox for first robotics
grabcad
free
Flipped 2 NEO 1 Plate Gearbox
...a theoretical free speed of 17.98 ft/s
- 3d printed housing to protect the gears from debris ingress
- integrated srx mag encoder
grabcad
free
2 Output bevel gear box
...2 output bevel gear box
grabcad
it's a 20 hp gear 2.16:1 custom-designed gearbox. the input speed is 500 rpm.
grabcad
free
Asteria Drive GearBox
... the prototype i made (5th picture) before the season to test the effectiveness and our ability to create a gear-shifting gearbox
grabcad
free
2 cim gear
...good mix of acceleration and top speed.
drive train gear (cim motor) with ratio 1:7.55, with that ratio we drive in 16.58 ft/s.