OpenDungeonTiles: Door Interior Roughstone 2x2 by PieceBringer

Last crawled date: 3 years ago

OpenDungeonTiles: Door Interior Roughstone 2x2
V1: The lock is now a nub lock in the full kit
V1: There are now edge stones around the door
V1: The slide for the gate is slightly larger.
I made this smaller standard size door, because I notice a lot of doors are all large doors that take two tiles - the standard door takes up only 1 tile
Assembly:
Walls take 5mm magnetic spheres
Floors take 3mm magnetic spheres
Bases take 5mm magnetic spheres
Insert 5mm magnetic spheres into the 2 holes, glue thinner piece on top. When placing other parts onto the base, the thinner glued on part should be on the bottom. (I am working on assembly video/instructions)
Door needs the support triangle removed and sanded. I added this because sometimes my printer would knock over the door.
Wall with Door needs all the support bars removed and sanded for the door.
You may need to clean the slot that the gate goes into.
To assemble I use Round Headed Sewing Pins to put through the door and wall to make it hinged.
OPTIONAL: You can remove just the smaller support bars and leave the thicker ones and use the wall as a barred doorway! Two-4-One deal
Open Forge Compatible.
Open Lock Compatible (Note: You must use the lock in my files it is thinner)
Glossary:
FullKit
Files marked FULLKIT at the beginning are all the pieces you need to assembly for a full base tiles/corner tile/wall tiles etc... They usually include the base, basecap, floor, floorcap, and walls with wallcap if applicable.
Kit
Files marked KIT at the beginning are the pieces you need to assembly a full tile without the base pieces (because there is a base kit, this https://www.thingiverse.com/thing:2463765)
KITDUAL
The is the same as a kit, but a files that contains two copies of the part. Cut down on copy paste in slicers.
Something else
These are the individual pieces if you wish to print a single part of the tile. Not all the files are done for these, and you may have to pull them out of the kits. (working on this)
Questions - use the comments, send me a message here or on patreon.
Hello I have set up a Patreon: https://www.patreon.com/opendungeontiles
Why go here, well it helps me give free models to the community and there is even a spot for limited custom requests!
https://www.youtube.com/channel/UC056LNf-ylFb1MyZ6Y89WdA