Thingiverse
OneUp - TwoUp Z axis range extender by nenadr
by Thingiverse
Last crawled date: 3 years ago
The ACME z-axis screw can support wider print range than possible with the stock vertical rods. Adding these 20mm by 8mm shims will lift the handle enough that you can raise the XGantry so that the screw top is just about level with the ACME nut. On my v2 TwoUp with heated bed, it extends the z-axis range from 100mm to 120mm.
Note that I route my wires between the gantry and the handle. If you route the wires above the handle, you only need a 15mm shim.
Model in FreeCAD.
Note that I route my wires between the gantry and the handle. If you route the wires above the handle, you only need a 15mm shim.
Model in FreeCAD.
Similar models
thingiverse
free
X-Ends for ACME Screws and LM10UU by dbozec
...d lm10uu by dbozec
thingiverse
these are x-ends for my mendelmax printer which is built with acme screws and 10mm rods on z axis
thingiverse
free
Printrbot LC Z-Axis Steppper w/ Acme Screw by twelvepro
...eppper w/ acme screw by twelvepro
thingiverse
we modified printrbot lc z-axis treaded rod with stepper with build in acme screw.
thingiverse
free
Tarantula Z Stepper Extended Bracket by HE3DUser151
...of movement to align with other lead screw brackets.
and you can mirror this in your slicer to print a left side for dual z-axis.
thingiverse
free
Z-Axis Acme Rod Support by NoahSkrzypczak
...nning. if you have had z wobbly in your prints, you understand how annoying it can be. now my prints have absolutely no z wobble.
thingiverse
free
ORD Bot Z Axis Support by pixl8ed
...ord bot z axis support by pixl8ed
thingiverse
additional support for the top of z axis threaded rods acme screws.
thingiverse
free
8mm acme nut block surrogate by litchdrom
...to use additional spacers (one or two shims). after that you will be allow to close your z axis rod by standard nuts.
good luck.
thingiverse
free
OneUp/TwoUp Z-Axis Endstop Bracket by Jeepguy42
...sily down the 8mm rods with a singe m3 screw to clamp. designed to work for the mechanical end stop v1.2 but may work for others.
thingiverse
free
Z axis coupler step-up adapter from 6.4mm to 8mm by Royaloliver
...nema 17 to 8mm z-axis coupler and need an adapter to hold my 6.4mm z-axis acme screw for my legacy printrbot. works like a charm!
thingiverse
free
Z Axis Handle by iAlbo
...z axis handle by ialbo
thingiverse
z axis handle for 8mm screw.
make the manual z axis easier to move.
thingiverse
free
PrintrBot Simple Z-axis Extension by ahaer
...mple z-axis extension by ahaer
thingiverse
add 47mm to z-axis travel using existing acme lead screw with $5 in additional parts.
Nenadr
thingiverse
free
OneUp/TwoUp wire bundle guide by nenadr
...naps onto the bottom part..the upright is offset to the right, so it clears the top of the x gantry for x=0.
model in freecad.
thingiverse
free
TwoUp V2 nut holder by nenadr
...the original holder's too flimsy, and the hex nut hole is too large. i've made it beefier, with a better nut holder hole.
thingiverse
free
Simple harness for Nexus 5 by nenadr
...s and do a fairly minimal editing.
i place no restrictions on the use of this code - you are welcome to do what you like with it.
thingiverse
free
GoPro clip mount by nenadr
...d_primitives) and as a thing
(http://www.thingiverse.com/thing:1679551).
please feel free to use, share as modify as you see fit.
thingiverse
free
Plumbcheck gizmo to verify X-Y-Z axes are orthogonal by nenadr
... all the angles were 90 degrees.
the end of the x axis of the gizmo is cut off to mark it, so i would know which axis is which.
thingiverse
free
Box for Canon SX700HS Camera by nenadr
...y with certain cavities i placed in around battery holder to reduce the weight.
please fell free to use or modify as you see fit.
thingiverse
free
Filament spool bearing by nenadr
...
obviously, you will need two of each piece to mount a spool.
model in freecad. you're welcome to use and modify as you like.
thingiverse
free
openSCAD Primitives Library by nenadr
...n a 2x2x2 array in a hopefully intuitive fashion.
i maintain this code on github: https://github.com/imageguy/openscad_primitives
thingiverse
free
Small quick release clamp by nenadr
... make each jaw.
i put no restrictions on this design and related code. you are welcome to use, share or modify it as you see fit.
Oneup
thingiverse
free
OneUp Test Proto by soyonsici
...oneup test proto by soyonsici
thingiverse
prototype for oneup
thingiverse
free
cover for ONEUP EDC TOP CAP by energy85
...cover for oneup edc top cap by energy85
thingiverse
cover for oneup edc top cap
3x 22/18mm rubber oil seal
(o-ringe)
thingiverse
free
Modified MacAttak endstop adjusters for OneUp by JWag
...p by jwag
thingiverse
this is a modification of macattak's y-endstop adjuster and x/z bracket, tweaked to work on the oneup.
thingiverse
free
OneUp Bed Replacement by kmenigoz
...rts on my oneup at a 45 degree angle to make them fit on the print bed. these parts are currently being used on my oneup printer.
thingiverse
free
OneUp/TwoUp filament guide by bkohn1
... theorange's tube holder. i modified it to fit a qu-bd oneup or twoup top plate to help guide the filament into the extruder.
thingiverse
free
OneUp/TwoUp filament guide - customizable by pezinek
...thingiverse
simple filament guide inspired by http://www.thingiverse.com/thing:481980
originaly meant for qu-bd oneup printer.
thingiverse
free
OneUp USA rack remote trigger
...ing and closing your oneup rack. i sewed some straps to the slots and used shock cord to hang the handle from and keep it tight.
thingiverse
free
Modified for OneUp by zabazoom
...prox 5mm to the left. printed up and it gives an additional 5mm on the x. seems to maintain sufficient clamping on the 8mm rods.
thingiverse
free
Canondale Lefty CAP with hole for OneUp EDC by PostMelvin
...fty front forks with a hole for integrating the oneup edc tool system (https://www.oneupcomponents.com/products/edc-tool-system).
thingiverse
free
QUBD Twoup or Oneup Sturdy J-Head mount by bloodsrrw
...t by bloodsrrw
thingiverse
remix of qubd twoup or oneup sturdy e3d v6 hotend mount by ugn100 to support the j-head type hotends.
Twoup
thingiverse
free
TwoUp Filament Guide by ScubaScott
...ide by scubascott
thingiverse
simple filament guide that mounts to the stock twoup handle.
one of my first designs & prints.
thingiverse
free
TwoUp spool holder by WhyAndHow
...ool holder for the qu-bd twoup printer. it prints without support and then clips onto the top of the case that holds the y motor.
thingiverse
free
TwoUp X Carriage by rotmankl
...mm extruder mounting spacing
use a zip tie for belt tensioning.
used with this gantry http://www.thingiverse.com/thing:248059
thingiverse
free
OneUp/TwoUp filament guide by bkohn1
... theorange's tube holder. i modified it to fit a qu-bd oneup or twoup top plate to help guide the filament into the extruder.
thingiverse
free
QUBD Twoup X Gantry by Andrewselesky
...qubd twoup x gantry by andrewselesky
thingiverse
works better now
thingiverse
free
Parameterized TwoUp! (v2) Bed Nut Holder by TSA_COLORADO
...do
thingiverse
extra support for the m3 nuts used for mounting the heated bed on the twoup (v2).
feedback much desired ! :-)
thingiverse
free
QUBD twoUP bowden e3d lite6 hotend mount by dtrain9009
...ubd twoup bowden e3d lite6 hotend mount by dtrain9009
thingiverse
mount for qubd twoup. mounts e3d lite6 to a nema 17 footprint.
thingiverse
free
TwoUp-grade by proto-plastik
... peek hotend.
note
this is an upgrade kit. you will need to utilize your existing shafts, z-axis drive, motors, and electronics.
thingiverse
free
QU-BD TwoUp Gantry Type Crane Upgrade by Hogsqueal
...type crane upgrade by hogsqueal
thingiverse
see updated version qu-bd twoup upgrade in http://www.thingiverse.com/thing:1227902.
thingiverse
free
QUBD Twoup or Oneup Sturdy J-Head mount by bloodsrrw
...t by bloodsrrw
thingiverse
remix of qubd twoup or oneup sturdy e3d v6 hotend mount by ugn100 to support the j-head type hotends.
Extender
turbosquid
$39
Extending table
...id
royalty free 3d model extending table for download as max on turbosquid: 3d models for games, architecture, videos. (1290552)
turbosquid
$5
Extend Table
...squid
royalty free 3d model extend table for download as skp on turbosquid: 3d models for games, architecture, videos. (1372508)
turbosquid
$40
Engine Extended
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Triple extender
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$99
Monica (Extended Pack)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Berlino Extendable Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Extendable Modern Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$32
KC10 Extender 3D Model
...c 10 aircraft jet fighter bomber close support interceptor spy attacker plane
kc10 extender 3d model martialartist 24527 3dexport
3d_export
$50
Extended Range Trailer 3D Model
...railer 3d model
3dexport
extended range trailer military patrol equipment
extended range trailer 3d model dougmavs 75684 3dexport
design_connected
$13
Big Dining Tables Extended
...ining tables extended
designconnected
bonaldo big dining tables extended computer generated 3d model. designed by gilles, alain.
Axis
3ddd
$1
Мария Axis
...
3ddd
кухня , классическая , axis
модель кухни.
3d_export
$22
Axis robot 6-axis robotic arm
...ing parts drawings, standard parts purchased parts list, can be produced directly according to the drawings, welcome to download!
3ddd
free
Versatile Axis
...ddd
nexus , плитка
http://bvtileandstone.com/ceramic-porcelain/versatile-axis/
3d_export
$19
robot 2 axis
...robot 2 axis
3dexport
robot 2 axis
turbosquid
$40
Axis R5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Axis S5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Axis Athlon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Linear Axis
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
drawing axis
...drawing axis
3dexport
simple rendering of the scene file
3ddd
$1
versatile axis ARC
...versatile axis arc
3ddd
versatile , плитка
versatile axis arc red dot design award
Range
turbosquid
$50
Mountain Range
...osquid
royalty free 3d model mountain range for download as on turbosquid: 3d models for games, architecture, videos. (1609235)
turbosquid
$20
Range hoods
...urbosquid
royalty free 3d model range hoods for download as on turbosquid: 3d models for games, architecture, videos. (1680492)
3d_ocean
$29
Gun Range
...ined with mini restaurant area. the scene is fully prepared with all the textures, materials and shaders for 3ds max and v-ray...
3d_export
$6
range rover evoque
...range rover evoque
3dexport
range rover evoque
turbosquid
$70
Tower+Range
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Gun Range
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
range-808
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Furniture range
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Range Hood
... model range hood for download as max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1671272)
turbosquid
$10
Shooting Range
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Z
3d_export
$5
nissan z
...nissan z
3dexport
nissan z
3ddd
$1
Vase Z
...vase z
3ddd
vase z
3ddd
$1
полотенцесушить Z
...полотенцесушить z
3ddd
полотенцесушитель
полотенцесушить z
design_connected
free
Z-Chair
...z-chair
designconnected
free 3d model of z-chair designed by karman, aleksei.
design_connected
$11
Z Lamp
...z lamp
designconnected
phillips z lamp computer generated 3d model. designed by kalff, louis.
3d_export
$5
Dragon balls z
...dragon balls z
3dexport
dragon ball z
turbosquid
$20
Fighter Z
...
turbosquid
royalty free 3d model fighter z for download as on turbosquid: 3d models for games, architecture, videos. (1292563)
turbosquid
$9
Pen Z
...pen z
turbosquid
free 3d model pen z for download as obj on turbosquid: 3d models for games, architecture, videos. (1686775)
turbosquid
free
z chair
...z chair
turbosquid
free 3d model z chair for download as max on turbosquid: 3d models for games, architecture, videos. (1410230)
turbosquid
$5
Letter Z
...urbosquid
royalty free 3d model letter z for download as max on turbosquid: 3d models for games, architecture, videos. (1408540)