oh shit toiletpaper radiator clip by mybrainsshit

Last crawled date: 3 years ago

This is a simple toilet paper holder. It clips onto a standard (in Germany 20.5mm) diameter towel heating. It features a rather minimalistic design and is definitely stable enough for regular use. Adapt diameter to your heating in onshape. I designed the clip to be 1mm larger then the actual tube, this clips really tight.
Also it makes fun of you when you didn't stock up enough rolls ;)
Or change the Message to what ever you want in the source:
(find the different designs in onshape's branches)https://cad.onshape.com/documents/f03f7d8a6917a755d7ec0cc8/w/b61f3b6c8ec8ad0dbab56e08/e/b919e1f6a6217770d164cc93
It does not have any moving parts and can be printed in one go without supports. I needed a little brim, cause i don't have a heated bed. At 0.2 mm layer height the message is readable and it takes about 4h on a standard kossel mini delta printer at 60mm/s. Used about 80g aka 26m of 1.75mm PLA+. If filament is scarce, you can cut the clip down to the lever(see files) it should also be firm enough. Unfortunately my own print failed on the last few layers, as you can see in the pictures, but it's still usable.
If you print it, please post a Make to make me happy ;)