Thingiverse
OFC220 - Quadcopter by gomaed
by Thingiverse
Last crawled date: 3 years ago
This is my version of a mini "Racing Quad". An X-Type with a 220mm arm span. I tried to achieve easy access to all components, but also to keep the build as clean as possible. Maybe it's not the most rugged construction, but it flies perfectly with 3S or 4S LiPo's.
All screws in the frame are M3 and are countersunk. The bottom frame can be printed on my Prusa i3 type printer in one piece. I don't need detachable arms, as I can print as many frames as I want if it cracks someday. Which it hasn't up to today.
Also I never use action cams on top of my racing quads, so there's no mount foreseen. All the components are attached to the bottom frame, so the top plate can be removed very easily without any hassle. Camera mount angle can be changed in CAD with just 2 clicks if needed.
This were my design considerations. The whole frame was done by me from scratch just for my own purposes. It's very modular, so if a different camera mount is needed you just have to design this part with your changes or change some parameters for the RX/VTX holder.
Hope you like it! :D
Components used in my build:
ESC's: 4x FVT LittleBee 20A
FC: Omnibus F4 Pro V2
PDB: Matek System PDB-XT60
MOTOR: Racerstar Racing Version 2205 BR2205 2300KV
VTX: Eachine TX526 5.8G 40CH 25MW/200MW/600MW
RX: Frsky XSR - 16ch Telemetry Receiver
All screws in the frame are M3 and are countersunk. The bottom frame can be printed on my Prusa i3 type printer in one piece. I don't need detachable arms, as I can print as many frames as I want if it cracks someday. Which it hasn't up to today.
Also I never use action cams on top of my racing quads, so there's no mount foreseen. All the components are attached to the bottom frame, so the top plate can be removed very easily without any hassle. Camera mount angle can be changed in CAD with just 2 clicks if needed.
This were my design considerations. The whole frame was done by me from scratch just for my own purposes. It's very modular, so if a different camera mount is needed you just have to design this part with your changes or change some parameters for the RX/VTX holder.
Hope you like it! :D
Components used in my build:
ESC's: 4x FVT LittleBee 20A
FC: Omnibus F4 Pro V2
PDB: Matek System PDB-XT60
MOTOR: Racerstar Racing Version 2205 BR2205 2300KV
VTX: Eachine TX526 5.8G 40CH 25MW/200MW/600MW
RX: Frsky XSR - 16ch Telemetry Receiver
Similar models
thingiverse
free
ImpulseRC Reverb RX/SMA Mount v1.2 by pavelmatic
...ot;deck" of the mount is intended for the rx (frsky x4r). other vtx/rx may work too obviously. just try and let me know. :-)
thingiverse
free
20x20mm Mount for the AKK Race VTX by ppetermann
... rest of the threaded part at the top.
use a zip tie to hold the vtx in place.
bonus points: i ziptied my rx on the bottom of it.
thingiverse
free
A01 VTX Mount
...ections/camera-vtx/products/a01-25-200mw-5-8g-vtx
and first of all it was design for a primo from gnarly fpv but fit on all tw fc
thingiverse
free
Reverb RX-SMA-Mount v1.2 - No Holes by pavelmatic
...ot;deck" of the mount is intended for the rx (frsky x4r). other vtx/rx may work too obviously. just try and let me know. :-)
thingiverse
free
BoltRC 210 Race BlackOps RX & VTX antenna mount by ntthhtl
...ce / blackops.
vtx antenna moved to top.
versions with sma connector nut "hollow" and with middle part "hole"
thingiverse
free
AstroX X5 VTx and Rx holder by GenCode
...e rx wires past the vtx if you put the vtx in the tray, or you can simply use the tray for the rx and put the wires out the side.
thingiverse
free
Martian II - RX and VTX holder
...reach the vtx holder.
i've also added a rx antenna "tubes" to the holder to stop the antennas from jiggling around.
thingiverse
free
250 Quad LED Arm Mount by add1ct3dd
...cing led's, but that's not enough for racing!! :)
designed a simple t piece, that you can glue or cable tie to the arm.
thingiverse
free
ZMR250 Camera Mount by idnarbjm
...zmr250 and i have a body on my quad, so i use this to mount the camera on the bottom of the frame using the front support screws.
thingiverse
free
FPV Cam mount by AmyCantFlyNow
...e top and bottom plates and comes out slightly as i have a little x quad with almost no room for anything but the pdb, fc and rx.
Gomaed
thingiverse
free
Goma de borrar by martitapfp
...goma de borrar by martitapfp
thingiverse
goma de milan clásica
thingiverse
free
goma cono arracador avión by juanilloM5
...goma cono arracador avión by juanillom5
thingiverse
goma cono arrancador
thingiverse
free
AQ600 Gomas tren aterrizaje by allurba
...aq600 gomas tren aterrizaje by allurba
thingiverse
gomas para el aq600.
solo filamento flexible. no imprimir con con pla y abs.
thingiverse
free
Parasol goma eva Mak127 by villamany
...c para grabar el logo y realizar el corte, pero con unas tijeras o cutter se corta sin problemas.
adjunto .dxf con planos y logo.
thingiverse
free
goma reixeta cuina Dometic / Smev by Premianencs
...goma reixeta cuina dometic / smev by premianencs
thingiverse
gomes de la cuina smev i dometic
thingiverse
free
Esquinero 60x60 con soporte de goma by DaniGambetta
...la impresora.
pensado para una prusa bear armada con perfiles de aluminio, pero tambien se pueden usar en un cnc, laser cut, ect.
thingiverse
free
pieza soporte goma motor arranque avion casero by juanilloM5
... motor arranque avion casero by juanillom5
thingiverse
adaptador motor arranque avion rc
con motor de arranque de scooter 125cc.
thingiverse
free
Taranis QX7 / QX7s USB Cover / Latch by gomaed
...he bottom usb / s.port cover on my old qx7. made a matchin one in orange and added matching markings on the inside for the ports.
thingiverse
free
OFCv3 FPV Racing Drone Frame by gomaed
...a and created my very own version of it. frame is aerodynamically shaped and not just square.
integrated crossfire nano mount....
thingiverse
free
Armattan Marmotte GoPro7 / Ratel / ESC Mount by gomaed
... frame.
needed an adapter for the caddx ratel fpv camera
+
gopro7 mount
+
esc mounting/padding for the holybro tekko32 f3 35a esc
Quadcopter
3d_export
$5
quadcopter
...quadcopter
3dexport
futuristic quadcopter design.<br>original design davidflo 77
turbosquid
$19
quadcopter
...lty free 3d model quadcopter for download as max, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1591426)
turbosquid
$25
QuadCopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Quadcopter 3D Model
...quadcopter 3d model
3dexport
quadcopter studio shaders
quadcopter 3d model vortex333 93968 3dexport
3d_export
$5
Quadcopter 3D Model
...quadcopter 3d model
3dexport
quadcopter aircraft helicopter
quadcopter 3d model greatghost 94019 3dexport
3d_export
$18
passenger quadcopter
... a multicopter is an aircraft built according to a helicopter scheme, with three or more rotors. previews rendered with redshift.
turbosquid
$159
Quadcopter Animated.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Drone Quadcopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Drone Quadcopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$29
Quadcopter
...
questions about the continuation of the collection or the model can be asked here:<br>https://www.artstation.com/evgen_beg