Cults
Nuclear bomb PC case. "Nuke"
by Cults
Last crawled date: 6 years, 2 months ago
I designed a PC case that resembles a nuclear bomb from Fallout 4. It's not an exact copy of the F4 bomb, but instead designed to fit standard PC components. Inspired by this Linus Tech Tips project: https://youtu.be/39nIGwEJKTQ
Printable on any printer with a 200x200x142mm printable volume.
This PC case reuires general problem solving skills, maker skills and careful installation to make everything fit. You paint and finish it however you like. I recommend army paint "DDR green" for the green and flat brown tamiya paint for the rust. The other colors are whatever you like. The thread for my build can be found here:
https://linustechtips.com/main/topic/870122-custom-3d-printed-fallout-nuke-case/
CPU temperatures are fine, but GPU temperatures were a little high on the prototype. This was be improved greatly by routing the PCIE cable around the side of the motherboard instead of under, like I did. It reduced the temperature to an acceptable 82°C under full GPU load.
----
Recommended components:
Motherboard: Any standard height ITX motherboard should fit, including the IO-shield. I have tried two motherboards, a GA-B150N-Phoenix-WIFI and ASRock Z270M-ITXac.
GPU: MSI GTX 1060 AERO ITX 6G OC. Other mini or ITX size cards should also fit, but I can't afford to buy more cards to test with.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FMSI-NVIDIA-GeForce-GTX-1060-AERO-ITX-6G-OC-DVI-2HDMI-2DisplayPort-pci-e-Video%2F192115629896%3Fepid%3D14010847375%26hash%3Ditem2cbafbdf48%3Ag%3ACA4AAOSwuxFYtOqu
PCIE-extension cable: Thermaltek 250-300 mm PCIE16x for side routing is recommended, or Liheat 350 mm B type for bottom routing (as pictured on the prototype). Cheap ribbon cables may also work in some cases, but I couldn't get mine to work.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FThermaltake-AC-045-CN1OTN-C1-TT-Premium-PCI-E-x16-3-0-Extender-Riser-Cable-300mm%2F142455321145%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FPCIE-PCI-Express16x-Extension-Adapter-Riser-Cable-GEN-3-350mm-B-type%2F122472932440%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649
CPU cooler: Noctua NH-L9i, Thermolab ITX30, Silverstone - SST-NT08-115XP or similar low profile cooler. Larger coolers will fit with an external PSU option or Pico PSU.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FPQ559-Noctua-NH-L9i-Intel-Low-Profile-Quiet-CPU-Cooler%2F132303055940%3Fepid%3D2255356067%26hash%3Ditem1ecde06c44%3Ag%3AWgMAAOSwlQ9Zm3~f
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FSilverstone-SST-NT08-115XP-CPU-K%25C3%25BChler-Hardware-Electronic-Silverstar-NEW%2F362179674356%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F281065681925
Case fan: Cooler Master Sickleflow 120 2000 RPM Green LED 120 mm work well in the bottom of the case. Other high power 120 mm fans will work.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FCoolerMaster-SickleFlow-120mm-Silent-Green-LED-Case-Fan%2F311332098740%3Fhash%3Ditem487cd6d2b4%3Ag%3AqswAAOSw7H1ZlCxH
PSU: Standard SFX form factor units will fit. 300 W or higher recommended.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FSilverStone-Technology-450W-SFX-Form-Factor-80-PLUS-BRONZE-Power-Supply-NEW%2F191982808696%3Fhash%3Ditem2cb3112e78%3Ag%3AwTIAAOSwYIxX7RWF
SSD: M.2 drives are recommended. There is enough room to fit a couple of standard 2,5" SSD as well but no provisions for mounting have been designed yet.
Power and reset switch: 6x6x10mm momentary switch and some wires with connectors. Shorter than 10mm length can be used, but requires something thin to be inserted into the switsh hole to turn on/reset.
https://www.banggood.com/5Pcs-6-x-6-x-10-4-Pin-Momentary-Schalter-Tactile-Micro-Drucktaster-p-1031861.html?p=HD240528697332015103
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FJST-2-5mm-2-Pin-Male-Female-RED-Connector-Housing-with-wire-26AWG-150mm-5-PAIRS%2F141356350121%3Fepid%3D828789197%26hash%3Ditem20e97ebaa9%3Ag%3AVz8AAOxyf1dTJwE1
Video cables: Angled HDMI cables or displayport cables.
https://www.banggood.com/Gold-2m-V1_4-HDMI-Male-To-HDMI-Male-Right-Angled-Tinned-Copper-Wire-Video-HDMI-Cable-p-1052579.html?p=HD240528697332015103
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2Fshort-HDMI-male-to-female-Down-Angle-90-degree-extension-cable%2F173019892023%3Fhash%3Ditem2848ca0937%3Ag%3AMrQAAOSw8gVX3UyQ
Screws:
6x M3x12 for mounting the SFX PSU and the GPU.
20x M6x8 for mounting the case parts together. It's your own choice wether you prefer slotted, philips or other screw types.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FM3-A2-STAINLESS-STEEL-SOCKET-CAP-BUTTON-COUNTERSUNK-CSK-HEAD-BOLTS-SCREWS-ALLEN-%2F112282529274%3Fvar%3D%26hash%3Ditem6016c00c55
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FM6-6mm-A2-STAINLESS-SLOTTED-CHEESE-HEAD-MACHINE-SCREWS-METRIC-SLOT-SCREW%2F111835099694%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26var%3D410817757651%26_trksid%3Dp2057872.m2749.l2649
----
Bottom01 - The lowest part of the bottom of the bomb casing.
Bottom02 - The center part of the bottom of the bomb casing.
Bottom03 - The upper part of the bottom of the bomb casing.
Center01 - The right side of the center section, with GPU mounts.
Center02 - The left side of the center section, with an opening for a regular 110v/220v power cable in the rear.
Center03-externalPSU - An alternative left side of the center section, with a larger opening for power cables from an external PSU.
Fin01 - The fins on the bottom.
PSUclamp01 - Clamps for holding the SFX psu to the left center section. Print two.
Tab01 - Mounting tabs between the center section and top and bottom sections. Print twelve.
Top01 - The bottom part of the top of the casing.
Top02 - The top half of the top of the casing.
Top03 - The aerodynamic splitter cone for glueing to the bottom of Top02.
Fanring01 - A ring to improve the efficiency of the Cooler MAster Sickleflow fan used in the bottom of the case, by reducing the blade gap to a minimum.
----
Printed part assembly:
Glue Bottom01 and Bottom02 together with the two pegs as guides.
The fin01 part and the bottom parts fit together nice and tight and usually don't require glue to fit together. I recommend painting them separately.
Glue Top03 to the bottom of Top02, and also glue top02 to Top01 with the fins of Top01 fitting in the slots under Top02.
Glue the twelve Tab01 pieces to the respective slots inside Top01 and Bottom03 using super glue/CA glue. M6x8mm screws will later hold the center section parts to these tabs.
Top01 has three slots in the rear for routing HDMi or displayport cables out the back. 90° adapters are recommended on the GPU connection if you use a fan in the top of the casing, to clear the fan.
----
Component installation:
There are two ways to route the GPU PCIE extension cable. On the prototype shown in the photos I have chosen to route the B-type 350 mm cable around the GPU and then down under the motherboard. I have folded the cable to achieve this.
The other option is to route the cable directly around the edge of the motherboard from the side and to the PCIE slot on the motherboard using, for example, a Thermaltek PCIE extension. I later made this change to the prototype. This gave a reduction in temperature of 10°C compared to routing under the motherboard. A 300 mm cable is more than long enough to reach around the side. A 250mm will probably be a perfect fit, but I haven't tried a 250 mm cable myself. The Thermaltek cables are very easy to manage as they are soft and split into narrow strips. I added a photo showing the PCIE cables coming around the side of the motherboard.
The GPU should be mounted at a slight angle, and the mounting points make this happen as it's installed. This was done on purpose to center the bottom end so that it would fit.
Use something insulating between the GPU and motherboard to prevent shorting. I recommend a thin sheet of fiberglass or a sheet of teflon. Cardboard can also be used in a pinch.
The motherboard is a tight fit in the slots in the bottom of the case. Test fit it before installing the GPU to practice first.
On the prototype I used one 120mm Cooler master sickelflow 2000 rpm fan in the bottom of the case, and no fan in the top. It provides plenty of airflow on its own, and I use fan managment software to keep it quiet when it's not needed to run fast.
The PSU is installed onto the left center section using two of the printed clamps and four M3x12 bolts.
Printable on any printer with a 200x200x142mm printable volume.
This PC case reuires general problem solving skills, maker skills and careful installation to make everything fit. You paint and finish it however you like. I recommend army paint "DDR green" for the green and flat brown tamiya paint for the rust. The other colors are whatever you like. The thread for my build can be found here:
https://linustechtips.com/main/topic/870122-custom-3d-printed-fallout-nuke-case/
CPU temperatures are fine, but GPU temperatures were a little high on the prototype. This was be improved greatly by routing the PCIE cable around the side of the motherboard instead of under, like I did. It reduced the temperature to an acceptable 82°C under full GPU load.
----
Recommended components:
Motherboard: Any standard height ITX motherboard should fit, including the IO-shield. I have tried two motherboards, a GA-B150N-Phoenix-WIFI and ASRock Z270M-ITXac.
GPU: MSI GTX 1060 AERO ITX 6G OC. Other mini or ITX size cards should also fit, but I can't afford to buy more cards to test with.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FMSI-NVIDIA-GeForce-GTX-1060-AERO-ITX-6G-OC-DVI-2HDMI-2DisplayPort-pci-e-Video%2F192115629896%3Fepid%3D14010847375%26hash%3Ditem2cbafbdf48%3Ag%3ACA4AAOSwuxFYtOqu
PCIE-extension cable: Thermaltek 250-300 mm PCIE16x for side routing is recommended, or Liheat 350 mm B type for bottom routing (as pictured on the prototype). Cheap ribbon cables may also work in some cases, but I couldn't get mine to work.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FThermaltake-AC-045-CN1OTN-C1-TT-Premium-PCI-E-x16-3-0-Extender-Riser-Cable-300mm%2F142455321145%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FPCIE-PCI-Express16x-Extension-Adapter-Riser-Cable-GEN-3-350mm-B-type%2F122472932440%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649
CPU cooler: Noctua NH-L9i, Thermolab ITX30, Silverstone - SST-NT08-115XP or similar low profile cooler. Larger coolers will fit with an external PSU option or Pico PSU.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FPQ559-Noctua-NH-L9i-Intel-Low-Profile-Quiet-CPU-Cooler%2F132303055940%3Fepid%3D2255356067%26hash%3Ditem1ecde06c44%3Ag%3AWgMAAOSwlQ9Zm3~f
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FSilverstone-SST-NT08-115XP-CPU-K%25C3%25BChler-Hardware-Electronic-Silverstar-NEW%2F362179674356%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F281065681925
Case fan: Cooler Master Sickleflow 120 2000 RPM Green LED 120 mm work well in the bottom of the case. Other high power 120 mm fans will work.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FCoolerMaster-SickleFlow-120mm-Silent-Green-LED-Case-Fan%2F311332098740%3Fhash%3Ditem487cd6d2b4%3Ag%3AqswAAOSw7H1ZlCxH
PSU: Standard SFX form factor units will fit. 300 W or higher recommended.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FSilverStone-Technology-450W-SFX-Form-Factor-80-PLUS-BRONZE-Power-Supply-NEW%2F191982808696%3Fhash%3Ditem2cb3112e78%3Ag%3AwTIAAOSwYIxX7RWF
SSD: M.2 drives are recommended. There is enough room to fit a couple of standard 2,5" SSD as well but no provisions for mounting have been designed yet.
Power and reset switch: 6x6x10mm momentary switch and some wires with connectors. Shorter than 10mm length can be used, but requires something thin to be inserted into the switsh hole to turn on/reset.
https://www.banggood.com/5Pcs-6-x-6-x-10-4-Pin-Momentary-Schalter-Tactile-Micro-Drucktaster-p-1031861.html?p=HD240528697332015103
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FJST-2-5mm-2-Pin-Male-Female-RED-Connector-Housing-with-wire-26AWG-150mm-5-PAIRS%2F141356350121%3Fepid%3D828789197%26hash%3Ditem20e97ebaa9%3Ag%3AVz8AAOxyf1dTJwE1
Video cables: Angled HDMI cables or displayport cables.
https://www.banggood.com/Gold-2m-V1_4-HDMI-Male-To-HDMI-Male-Right-Angled-Tinned-Copper-Wire-Video-HDMI-Cable-p-1052579.html?p=HD240528697332015103
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2Fshort-HDMI-male-to-female-Down-Angle-90-degree-extension-cable%2F173019892023%3Fhash%3Ditem2848ca0937%3Ag%3AMrQAAOSw8gVX3UyQ
Screws:
6x M3x12 for mounting the SFX PSU and the GPU.
20x M6x8 for mounting the case parts together. It's your own choice wether you prefer slotted, philips or other screw types.
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FM3-A2-STAINLESS-STEEL-SOCKET-CAP-BUTTON-COUNTERSUNK-CSK-HEAD-BOLTS-SCREWS-ALLEN-%2F112282529274%3Fvar%3D%26hash%3Ditem6016c00c55
https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FM6-6mm-A2-STAINLESS-SLOTTED-CHEESE-HEAD-MACHINE-SCREWS-METRIC-SLOT-SCREW%2F111835099694%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26var%3D410817757651%26_trksid%3Dp2057872.m2749.l2649
----
Bottom01 - The lowest part of the bottom of the bomb casing.
Bottom02 - The center part of the bottom of the bomb casing.
Bottom03 - The upper part of the bottom of the bomb casing.
Center01 - The right side of the center section, with GPU mounts.
Center02 - The left side of the center section, with an opening for a regular 110v/220v power cable in the rear.
Center03-externalPSU - An alternative left side of the center section, with a larger opening for power cables from an external PSU.
Fin01 - The fins on the bottom.
PSUclamp01 - Clamps for holding the SFX psu to the left center section. Print two.
Tab01 - Mounting tabs between the center section and top and bottom sections. Print twelve.
Top01 - The bottom part of the top of the casing.
Top02 - The top half of the top of the casing.
Top03 - The aerodynamic splitter cone for glueing to the bottom of Top02.
Fanring01 - A ring to improve the efficiency of the Cooler MAster Sickleflow fan used in the bottom of the case, by reducing the blade gap to a minimum.
----
Printed part assembly:
Glue Bottom01 and Bottom02 together with the two pegs as guides.
The fin01 part and the bottom parts fit together nice and tight and usually don't require glue to fit together. I recommend painting them separately.
Glue Top03 to the bottom of Top02, and also glue top02 to Top01 with the fins of Top01 fitting in the slots under Top02.
Glue the twelve Tab01 pieces to the respective slots inside Top01 and Bottom03 using super glue/CA glue. M6x8mm screws will later hold the center section parts to these tabs.
Top01 has three slots in the rear for routing HDMi or displayport cables out the back. 90° adapters are recommended on the GPU connection if you use a fan in the top of the casing, to clear the fan.
----
Component installation:
There are two ways to route the GPU PCIE extension cable. On the prototype shown in the photos I have chosen to route the B-type 350 mm cable around the GPU and then down under the motherboard. I have folded the cable to achieve this.
The other option is to route the cable directly around the edge of the motherboard from the side and to the PCIE slot on the motherboard using, for example, a Thermaltek PCIE extension. I later made this change to the prototype. This gave a reduction in temperature of 10°C compared to routing under the motherboard. A 300 mm cable is more than long enough to reach around the side. A 250mm will probably be a perfect fit, but I haven't tried a 250 mm cable myself. The Thermaltek cables are very easy to manage as they are soft and split into narrow strips. I added a photo showing the PCIE cables coming around the side of the motherboard.
The GPU should be mounted at a slight angle, and the mounting points make this happen as it's installed. This was done on purpose to center the bottom end so that it would fit.
Use something insulating between the GPU and motherboard to prevent shorting. I recommend a thin sheet of fiberglass or a sheet of teflon. Cardboard can also be used in a pinch.
The motherboard is a tight fit in the slots in the bottom of the case. Test fit it before installing the GPU to practice first.
On the prototype I used one 120mm Cooler master sickelflow 2000 rpm fan in the bottom of the case, and no fan in the top. It provides plenty of airflow on its own, and I use fan managment software to keep it quiet when it's not needed to run fast.
The PSU is installed onto the left center section using two of the printed clamps and four M3x12 bolts.
Similar models
cults
free
Cooler Master Sickleflow 120mm fan performance mod.
...the photo of the ring installed is an early test version of the ring. the updated version is slightly different for improved fit.
cults
free
RC monster truck wheel
...le left tire. 73 mm width. fits narrow wheel.
tireright-narrow.stl - narrow printable right tire. 73 mm width. fits narrow wheel.
cults
free
Mammut - Giant printer.
...chment:
https://www.banggood.com/10pcs-ac-250v-15a-v-156-1c25-spdt-roller-lever-micro-switch-p-944613.html?p=hd240528697332015103
cults
free
Lynx - Fully 3D-printable 1/10 4wd buggy
...wheels01.stl - wheels for standard 2.2" tires, or printable tires
wing01.stl - wing
wingmount01.stl - separate wing mounts
cults
$5
RaspberryPi Mediacenter case
...?ie=utf8&psc=1&smid=a50dzi580g3jx (much more screws)
there will be some new / other versions of this case soon.
cults
free
Swivel Case 1 Remix
... ).
search [magnet 6mm 3mm] at your familiar e-commerce sites. (amazon, banggood, aliexpress, etc.)
https://youtu.be/5aqwzjwqde4
cults
$24
Servo cable control casing
...lated. to be used in conjunction with this.
to purchase it printed already...
http://www.innerbreed.co.uk/servo-hardware-addons
cults
free
Go Pro Hero 3+ Battery Case
.../dp/b00mezeej2/ref=sr_1_1?s=industrial&ie=utf8&qid=1501210666&sr=1-1&keywords=hatchbox+silver+pla
cults
free
LG V20 dock
...was based on daelmanu's, i decided to create a similar dock for the lg v20. the dock is designed...
cults
free
3A batteries mod for SMARS
...gned to fit this motor driver: https://goo.gl/v8adzu
you will need some prong fastener (like these ones https://goo.gl/kckwi9)
Nuclear
cults
free
Space station Vjuga
...space station vjuga cults dead_hand model nucke nuclear rocket scale ship space stand station ussr vjuga one...
cults
free
The Shower of Tomorrow
...bathroom minecraft lowpoly extreme explosive water spray control touchscreen nuclear vent ventilation terrace table terraced soap floor drain sink...
cults
free
Cooler Master Sickleflow 120mm fan performance mod.
...case can be downloaded here for a small fee: https://cults3d.com/en/3d-model/various/nuclearbomb-pc-case-nuke the photo of the ring installed is an early...
Motherboard
cults
free
Raspberry Pi Motherboard Support 3 Model B
...rboard support 3 model b
cults
raspberry pi motherboard 3 model b support
inclined bracket for raspberry pi motherboard 3 model b
cults
free
Frosty: Thin Mini-ITX case for Asus H81T
...compact and fully equipped computer case for a mini-itx motherboard specifically made for asus h81t, but should work fine...
cults
free
Filament Sensor Case & Setup Info/Settings
...#3 make the software use the right pin on motherboard scroll down the tab and look for the below...
cults
free
Mammut - Giant printer.
...board with a4988 drivers. the newest version is v1.4: https://www.banggood.com/mks-gen-v1_4-3d-printer-control-motherboardcompatible-reprap-ramps1_4-p-951136.html?p=hd240528697332015103&cur_warehouse=cn https://www.banggood.com/10pcs-3d-printer-a4988-reprap-stepper-motor-driver-module-p-955808.html?p=hd240528697332015103 https://www.banggood.com/3d-printer-a4988-reprap-stepping-stepper-step-motor-driver-module-p-88765.html?p=hd240528697332015103 the pulleys are 2mm pitch. i use...
Nuke
cults
free
Fallout 3 - Mini Nuke
...om/lilykill1, and instagram @ https://instagram.com/lilykill1/ where you can stay up-to-date on my current projects and releases.
cults
free
Fallout 4 - Mini Nuke
...om/lilykill1, and instagram @ https://instagram.com/lilykill1/ where you can stay up-to-date on my current projects and releases.
cults
free
Cooler Master Sickleflow 120mm fan performance mod.
...case can be downloaded here for a small fee: https://cults3d.com/en/3d-model/various/nuclear-bomb-pc-case-nuke the photo of the ring installed is an early...
cults
free
Fallout Flash bangs (Mussy Design)
...flash bangs (mussy design) cults fallout canister and mini nuke flash-bangs this is an impact activated flash bang that...
cults
free
Space station Vjuga
...to their third stage boosters. eliminating long ascending trajectory, nuke could strike almost immediately rendering any missile defence system...
Cpu
cults
free
Frosty: Thin Mini-ITX case for Asus H81T
...ventilated - no case fan needed. with intel stock cpu fan running in silent mode, with cpu on full...
cults
free
PC hanger / Stands hanging PC
...pc hanger / stands hanging pc cults cpu hang up hanger support hang pc computer stands to...
cults
free
Fan guard with feet for 120mm fan.
...thickness. here's a handy assortment: https://www.banggood.com/442pcs-m3-stainless-steel-hex-head-srews-bolt-nuts-hexagon-handle-tool-kit-p-1076216.html?p=hd240528697332015103 fans: https://www.banggood.com/12cm-red-green-blue-white-led-light-luminescent-computer-cooling-fan-cooler-heatsink-p-1206822.html?p=hd240528697332015103&cur_warehouse=cn https://www.banggood.com/deepcool-12012025mm-3pin-4pin-quiet-cpu-cooling-fan-with-led-light-for-desktop-pc-p-1171358.html?p=hd240528697332015103&cur_warehouse=cn https://www.banggood.com/deepcool-12012025mm-12v-3pin-led-cpucooling-fan-radiator-for-pc-desktop-mute-p-1182156.html?p=hd240528697332015103&cur_warehouse=cn https://www.banggood.com/akasa-12cm-viper-cooling-fan-s-flow-fan-blade-design-high-performance-4pin-pwm-auto-speed-control-p-1216402.html?p=hd240528697332015103&cur_warehouse=cn https://www.banggood.com/akasa-apache-12cm-4pin-pwm-cooling-fan-12v-s-flow-fan-heat-sink-hydro-dynamic-bearing-p-1214796.html?p=hd240528697332015103&cur_warehouse=cn...
cults
free
Fish Feeder Project
...main goal was to keep power consumption low. the cpu is mostly in sleep mode, there is no display....
cults
free
T-800 Single and 3 Piece High Detail Head
...and make them all seperate and also add the cpu core screw cap :) remix from tosch &...
cults
free
Alien Jockey Commemorative Bust / Model
...- even turning the camera crunched my 8 core cpu when this thing was at full quality. put it...
cults
free
Deadpool Bust HD (With Supports)
...high res model, and to be honest my 8x cpu#39;s grind to a halt when i try and generate...
cults
free
Mammut - Giant printer.
...and two 35x10mm blower fans for pla cooling: https://www.banggood.com/volcano-hot-end-eruption-heater-block-heating-block-for-3d-printer-accessories-p-1014475.html?p=hd240528697332015103 https://www.banggood.com/heatsink-12v-0_1a-2-pins-cpucooling-fan-pc-computer-40x40x10mm-p-920618.html?p=hd240528697332015103&cur_warehouse=cn https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338226872&mpre=https%3a%2f%2fwww.ebay.com%2fitm%2f1pc-new-delta-bfb03505ha-35x35x10mm-35mm-3510-5v-0-17a-dc-brushless-blower-fan%2f221214013657%3fhash%3ditem338161f8d9%3ag%3agxcaamxqlbvraf6c this fan can fit with some modification: https://www.banggood.com/aluminum-heatsink-cooling-fan-for-lattepanda-matching-acrylic-case-p-1092769.html?p=hd240528697332015103&cur_warehouse=cn...
Rgb
cults
free
DIY Acrylic RGB LED Sign
...ll project documentation.
https://www.instructables.com/id/diy-acrylic-rgb-led-sign/
https://www.youtube.com/watch?v=_ingt60dhn4
cults
$4
Snowman, Schneemann, 120MM, RGB LED slow-flashing cr2032 coin cell christmas
...ed you can find on ebay.
i used two leds for better shining.
here is a video on youtube
https://youtu.be/wluvys7s-2o
have fun!
cults
free
Cellular Lamp with foot, E27 RGB LED and diffuser
...i really want to see other people prints too :)
(!not for commercial use !)
remix from: https://www.thingiverse.com/thing:19104
cults
$5
AC / DC led lamp # 3dprintRocks
...art home ac / dc logo lamp! lighted by rgb led strip with remote control and rgb controller. i...
cults
free
Christmas Decoration - Star with color LED Strip
...led strip cults arduino christmas christmas_decoration decoration led led_strip rgb rgb_led rgb_led_strip ws2812 xmas xmas_decorations this christmas decoration star...
cults
free
Teardrop Lamp (3D Printed Components, Concrete + Wood Veneer Build)
...veneer build) cults build concrete diy diy3dprinting lamp light rgb instructions to complete build are here: https://www.adylinn.com/blog/teardrop-lamp thanks for...
cults
free
LED Ring Light
...neopixels which produces much better lighting. white light from rgb type neopixels produces a reddish hue on skin tones...
cults
free
VINDIBEACON! (rick and morty)
...crystal for led's. i used a 9v and a rgb diffused led with some...
cults
free
Sheikah Pendant – NeoPixel Jewelry with GEMMA M0
...pendant is a neopixel jewel which features 7 smart rgb leds. driving the neopixels is an adafruit gemma m0,...
cults
free
LED bridge lamp
...hands gesture and three rotary encoder knobs to adjust rgb components of the led strip....
Bomb
cults
free
Bomb
...bomb
cults
bomb tnt bomba toon
a little bomb for decoration and fun.
cults
free
Bacta bomb
...art bomb bacta-bomb starwars starwarsfan starwarsweapons starwars_costume game-design-contest
bacta bomb / star wars battlefront.
cults
$16
Tracer pulse bomb.
...
cults
tracer pulse bomb overwatch bomb
tracer pulse bomb from overwatch. printable.
https://photos.app.goo.gl/wghpsxcy5hcltwb33
cults
free
Streamer Bomb Drop
...streamer bomb drop
cults
this is a streamer bomb drop used for r/c airplanes
cults
free
Can Bomb
...with hole for straw has been added. 6 and 8mm straw.
update 07-22-16
i've added a lid for it
holder for a normal sized cans
cults
free
Banksy - Stencil - Girl bomb hugger
...
http://horizonlab.co/2017/08/10/banksy-stencil-girl-bomb-hugger/
more stencils exclusively here: http://horizonlab.co/stencils/
cults
free
Christmas tree. Bath Bomb Mold
...; wide by 3 1/2” tall.
if there is a something special that you would like made let me know and i will see what i can do for you.
cults
free
Pull Ignition (SMOKE BOMB)
... for airsoft smoke bomb 30mm od ;)
!don't forget to check out my other designs and follow my daily kookoo uploads, enjoy ;)
cults
free
Trinket junkrat bomb | overwatch
...et junkrat bomb | overwatch
cults
blizzard junkrat ow trinket overwatch over watch
size
x 40.00 mm
y 42.02 mm
z 16.19 mm
brrring!
cults
free
Bomb Bay / Chute for Dynam SkyMule
...how it works you can see here: https://www.youtube.com/watch?v=qze0t3x56j8
and here: https://www.youtube.com/watch?v=wovwzmrcweq
Fallout
cults
free
Fallout Flake
...n learning to use fusion360 so this is version 1 created from scratch.
hope you like :)
thanks to forge3d for the inspiration!
cults
free
Synth Field Helmet (Fallout 4)
...synth field helmet form fallout 4.
it is sized for and adult male but check the pdf file for measurements. the units are in mm.
cults
free
Fallout 4 Vault Boy Cookie Cutter
...fallout 4 vault boy cookie cutter
cults
fallout 4 vault boy cookie cutter
fallout 4 vault boy cookie cutter
cults
free
Fallout Detonator (Prop)
...=plhza91xicgi7x5rbozr1mgfsqsseez77r
!don't forget to check out my other designs and follow my daily kookoo uploads, enjoy ;)
cults
free
Fallout 3 - Ripper
...om/lilykill1, and instagram @ https://instagram.com/lilykill1/ where you can stay up-to-date on my current projects and releases.
cults
free
Thirst Zapper from Fallout - Shoots NERF darts
... thirst zapper
this is my 2nd functional nerf weapon!
https://youtu.be/i1ysaewrxzw
you will need a spring to be able to use it.
cults
free
Fallout 3 - Hand Grenade
...om/lilykill1, and instagram @ https://instagram.com/lilykill1/ where you can stay up-to-date on my current projects and releases.
cults
free
Fallout 3 - Mini Nuke
...om/lilykill1, and instagram @ https://instagram.com/lilykill1/ where you can stay up-to-date on my current projects and releases.
cults
free
Fallout 4 - Ripper
...com/lilykill1, and instagram @https://instagram.com/lilykill1/ where you can stay up-to-date on my current projects and releases.
cults
free
Fallout 3 - 10mm pistol
...om/lilykill1, and instagram @ https://instagram.com/lilykill1/ where you can stay up-to-date on my current projects and releases.
Pc
cults
free
PC hanger / Stands hanging PC
...com/thing:2619021
optionally you can buy the self-closing clips or print a model like https://www.thingiverse.com/thing:1001848
cults
free
Universal Pc Cooler
...ick mac macbook useful smart
universal pc cooler, here tested on macbook pro 2012, also used on asus swift.
cults
free
PC Cat Proofing
...this cover for the pc power button.
!don't forget to check out my other designs and follow my daily kookoo uploads, enjoy ;)
cults
$2
PC note clamps
...s, n° tel au plus près de vous. fixez-les sur votre pc au moyen d'un trombone et placez aussi un crayon si vous le souhaitez.
cults
free
smarthone and tablet PC stand - uni-stand-B -
...d tablet pc stand - uni-stand-b -
cults
smarthone and tablet pc stand - uni-stand-b
smarthone and tablet pc stand - uni-stand-b -
cults
free
smarthone and tablet PC stand - uni-stand-P -
...d tablet pc stand - uni-stand-p -
cults
smarthone and tablet pc stand - uni-stand-p
smarthone and tablet pc stand - uni-stand-p -
cults
free
Remote for PC Youtube and netflix
... instructable.
video: https://youtu.be/cfqnek6cic4
tutorial: https://www.instructables.com/id/remote-for-pc-youtube-and-netflix
cults
free
7 inch mini PC
...o diagnose your machines or just when we need to bring a computer to your workbench.
https://www.youtube.com/watch?v=tvrc_yisvvq
cults
free
Mavic Pro Polarpro filters case (3 pcs)
...3 pcs)
cults
polarpro mavic dji case filters
a compact case for three polarpro filters (21,2 mm ext. diameter) used in mavic pro.
cults
free
Orange PI PC Case with External mounts + M5 mount
...of a tv.
original design:
http://www.thingiverse.com/thing:1565411
remix of the remix:
http://www.thingiverse.com/thing:1897829
Computer
cults
free
Computer / computer
...omputer / computer
cults
computer pla laptop
petit ordinateur chouette créé avec sketchup/small great computer make with sketchup
cults
free
Pikachu Computer Adapter!
...pikachu computer adapter!
cults
pikachu computer adapter!
pikachu computer adapter!
cults
free
Computer Keyboard Riser
...computer keyboard riser
cults
computer keyboard riser
computer keyboard riser
cults
free
Computer Monitor Stand
...computer monitor stand
cults
computer monitor stand
computer monitor stand
cults
free
Computer Monster
...r
cults
my mother is a middle school computer lab teacher. i thought i would give her something funny for her desk at school :)
cults
free
Tiny computer older
...tiny computer older
cults
a small part to vertically attach a tiny computer
cults
free
Table with a standalone computer closure
...table with a standalone computer closure
cults
table with a standalone computer closure
table with a standalone computer closure
cults
free
Bosch Electric Bike Computer Cover
...bosch electric bike computer cover
cults
bosch electric bike computer cover
bosch electric bike computer cover
cults
free
Fan for repairing a 40x10mm computer fan.
...n for repairing a 40x10mm computer fan.
cults
fan for repairing a 40x10mm computer fan.
fan for repairing a 40x10mm computer fan.
cults
$1
Computer screen type A
...r square bell ding dong loading fence concrete deposit sncf 5 calvary jesus religion christian pc computer
computer screen type a
Mini
cults
free
Imac Mini- IPad mini Imac
...imac mini- ipad mini imac
cults
imac mini ipad mini-
imac mini- ipad mini imac
cults
free
bmw mini
...bmw mini
cults
bmw mini
bmw mini
cults
free
Mini Tentacles
...mini tentacles
cults
mini tentacles
mini tentacles
cults
free
Mini vase
...mini vase
cults
mini vase
mini vase
cults
free
Mini Compressor
...mini compressor
cults
mini solidworks
cults
$1
Shovel (mini)
...shovel (mini)
cults
mini shovel
realization of a mini excavator for my gardening (repotage) or possibly the kitchen in pla
cults
$10
Mini Storage Cabinet
...mini storage cabinet
cults
mini cabinet mini cabinet storage
mini cabinet
cults
$2
Mini golf
...ail accessories (blackcurrant-flag)
- a mini golf club and its ball
add elements to the tracks to increase the difficulty.
cults
free
Mini planter
...
mini planter tree geodesic geomatric decoration home
this is a geomatric mini planter. use for small plants in home, office,shop
cults
free
Modified Carabiner Mini
...modified carabiner mini
cults
modified carabiner mini
modified carabiner mini
Case
cults
free
Needle Case
...needle case
cults
needle case
needle case
cults
$1
Pencil Case
...pencil case
cults
pencil case office pencil case home study teacher student
pencil case
cults
$1
kindle casing
...kindle casing
cults
kindle casing flexi tool
kindle casing
cults
free
Headphones case
...utton is used to open the case, but it is possible to use a fixing cord.
the case is closed by the thread tension of the helmet.
cults
free
iPhone 6 Case Simpson / Case
...iphone 6 case simpson / case
cults
cool shell simpson
cults
free
Cord Case
...art.
there are 2 different models:
case 1 and case 2. i hope this is enough for you to find your way through the stl files :-)
cults
$6
Dodecahedron case
...dodecahedron case
cults
case box jewel luxury
inside diameter: 26mm
plasmeo3d.com
cults
$10
MOTO E3 Case
...moto e3 case
cults
moto case mobile
moto e3 case
cults
$6
Contu Mobile case
...contu mobile case
cults
contu mobile case
contu mobile case
cults
$5
Ear Bud Case
...ear bud case
cults
ear bud case
ear bud case
Quot
cults
free
"Heart" box.
..."heart" box.
cults
"heart" box.
"heart" box.
cults
free
Quilling "Tulips".
...quilling "tulips".
cults
quilling "tulips".
quilling "tulips".
cults
free
Quilling "Swan"
...quilling "swan"
cults
quilling "swan"
quilling "swan"
cults
$1
"Like" to ask.
..."like" to ask.
cults
like
"like" to ask.
cults
free
"Albina" vase
..."albina" vase
cults
vase
classically shaped vase named "albina".
cults
$1
Space "ticktacktoe"
...
"ticktacktoe";
-text "flying to the moon" on the base, rocket logo on the box.
x:100mm y:20.56mm z:99.35mm
cults
free
"Like" stamp
...n a letter.
if you want to have korean version of 'like stamp', please visit http://www.makersn.com/items/detail/id/534.
cults
free
Firetruck for "Flashpoint"
...ruck for "flashpoint"
cults
my son is playing the boardgame "flashpoint", so i made him a firetruck
cults
free
Ambulance for "Flashpoint"
...ance for "flashpoint"
cults
my son is playing the boardgame "flashpoint", so i made him a ambulance
cults
$1
"3 pendants" and "SIMPLE FURNITURE TOY"
..."3 pendants" and "simple furniture toy"
cults
-3 pendants
-3 chairs
-stool
-bed
-table