Thingiverse
Nomad 883 Pro Air Mod by DavidJohnson
by Thingiverse
Last crawled date: 3 years, 1 month ago
The idea originally posted by Danny Harper for the SO3
Modified for the Nomad, the Air-Holder is a simple tube grip which holds the custom air nozzle and mounts to the existing Nomad spindle clamp.
Learn the process of creating cool, high-tech projects in my micro-fab lab!
*If you would like to support the videos, please visit: http://www.diy.engineering/sponsor
Parts I Used for this mod:
Air-Pump:Apollo Horticulture 35 Watt 40-LPM Commercial Air Pump with 6 Outlet Plastic Divider
(Although I tested pumps with volume up-to 3200 GPH, back pressure from the 1/4" tube negated most benefits making this pump fine for most cases. also considering the feeds, speeds and chip size of the nomad 883)
Air Nozzle:Campbell Hausfeld MP5143 Pistol Grip Blowgun
Hose:Lee's Sleek Airline Tubing, 8-Foot, Black
Steps:
1) 3d print the Air-Holder part
2) remove back and top panel of Nomad 883 (remove 9x 3 mm cap head screws + 2x 6 mm button screws, remove back, raise front door and slide top out back)
3) remove press-fit aluminum nozzle from pistol grip blow gun. (protect tube with tape, use pliers to twist, then pull straight out carefully)
4) feed tube through drag-chain. start at spindle side.
5) pull excess tubing through electronics access port. (leave ~10" excess tube on the spindle side)
6) lightly zip tie tube to spindle motor wiring at entrance of drag chain.
7) Drill 1/4" hole in back panel at desired location for tube to exit machine. (I used 3/8" and a grommet to protect the tube)
8) install top panel.
9) Run line through back panel hole (feed through grommet if used)
10) install back panel (start with 2x 6 mm button screws at bottom then install 9x 3 mm cap head screws)
11) back to the spindle-side, cut tube slightly longer that the wires going to the spindle motor. (the air nozzle will be able to slide up and down so be sure to give yourself some slack to adjust the air nozzle position.)
12) remove the 6 mm spindle clamp bolt (note torque of bolt for reassembly)
13) I applied neoprene foam to the air-holder to ensure a snug fit without interfering with spindle clamp.
14) install 6 mm spindle clamp bolt (apply noted torque from step 12)
15) heat end of tube and install nozzle into tube (insert 1/2")
16) snap nozzle into air-holder and adjust position and angle of nozzle.
17) confirm clearance in all positions of the spindle, adjust as needed.
18) heat opposite end of air line to install air pump, insert on barbed pump connector.
19) turn on pump prior to milling operations for a nice chip clearing solution.
20) now go thank Danny Harper for the idea!
Modified for the Nomad, the Air-Holder is a simple tube grip which holds the custom air nozzle and mounts to the existing Nomad spindle clamp.
Learn the process of creating cool, high-tech projects in my micro-fab lab!
*If you would like to support the videos, please visit: http://www.diy.engineering/sponsor
Parts I Used for this mod:
Air-Pump:Apollo Horticulture 35 Watt 40-LPM Commercial Air Pump with 6 Outlet Plastic Divider
(Although I tested pumps with volume up-to 3200 GPH, back pressure from the 1/4" tube negated most benefits making this pump fine for most cases. also considering the feeds, speeds and chip size of the nomad 883)
Air Nozzle:Campbell Hausfeld MP5143 Pistol Grip Blowgun
Hose:Lee's Sleek Airline Tubing, 8-Foot, Black
Steps:
1) 3d print the Air-Holder part
2) remove back and top panel of Nomad 883 (remove 9x 3 mm cap head screws + 2x 6 mm button screws, remove back, raise front door and slide top out back)
3) remove press-fit aluminum nozzle from pistol grip blow gun. (protect tube with tape, use pliers to twist, then pull straight out carefully)
4) feed tube through drag-chain. start at spindle side.
5) pull excess tubing through electronics access port. (leave ~10" excess tube on the spindle side)
6) lightly zip tie tube to spindle motor wiring at entrance of drag chain.
7) Drill 1/4" hole in back panel at desired location for tube to exit machine. (I used 3/8" and a grommet to protect the tube)
8) install top panel.
9) Run line through back panel hole (feed through grommet if used)
10) install back panel (start with 2x 6 mm button screws at bottom then install 9x 3 mm cap head screws)
11) back to the spindle-side, cut tube slightly longer that the wires going to the spindle motor. (the air nozzle will be able to slide up and down so be sure to give yourself some slack to adjust the air nozzle position.)
12) remove the 6 mm spindle clamp bolt (note torque of bolt for reassembly)
13) I applied neoprene foam to the air-holder to ensure a snug fit without interfering with spindle clamp.
14) install 6 mm spindle clamp bolt (apply noted torque from step 12)
15) heat end of tube and install nozzle into tube (insert 1/2")
16) snap nozzle into air-holder and adjust position and angle of nozzle.
17) confirm clearance in all positions of the spindle, adjust as needed.
18) heat opposite end of air line to install air pump, insert on barbed pump connector.
19) turn on pump prior to milling operations for a nice chip clearing solution.
20) now go thank Danny Harper for the idea!
Similar models
thingiverse
free
Flashforge Real Panel Tube Clamp And Cover by shingabiss
...iss
thingiverse
this is a little clamp i designed to better hold the feed tubes on the back of the flashforge creator dual pro.
3dwarehouse
free
Chem Feed Pump - Harper ESD
...chem feed pump - harper esd
3dwarehouse
metering pumps
grabcad
free
AIRFLOW REVERSING NOZZLE
...ct, drawing chips and coolant from farther up the tube. sized for 1" tubing with .049" wall and 1/8" npt air feed.
thingiverse
free
Nozzle on the lathe Chuck NOVA
...before installation, remove the external screws from the remaining cheeks. nozzles are screwed with screws (bolts) m6 30 mm long.
thingiverse
free
Air hose holder for Nomad Pro CNC by Carbide3D by Gu1234
...indle might get a little bit hot.
i used a silicon hose as it's really flexible and doesn't effect the machine movements.
thingiverse
free
Sainsmart laser holder with air assist nozzle for 3018 cnc v2 by lewiswalsh
... assist nozzle for 3018 cnc v2 by lewiswalsh
thingiverse
allows for the sainsmart laser to be held without removing the spindle.
thingiverse
free
Tube clamp build for stepcraft840 vacuum to spindle cable by MichaelBaumann
...ingiverse
this clamp was build to connect the cable of our stepcraft hf spindle (6,6 mm) to the cnc's vacuum tube(25-28 mm).
grabcad
free
Krimelte Peristaltic Pump Applicator
... left hand operation, remove nozzle and move wheel assembly to the other side, and moving tube to the other side, install nozzle.
thingiverse
free
Slide-on Grips Remover/Installer by maxlawwk
...e hustle to remove/install a slide-on grip. grips are reusable after removal. no air-compressor and other special tools required.
grabcad
free
FUEL INJECTOR
...ses.the excess oil left-over in the injector, flows back through the clearance around the distance piece into the over-flow exit.
Davidjohnson
thingiverse
free
Indestructable ESC cover by DavidJohnson
...indestructable esc cover by davidjohnson
thingiverse
an indestructable esc cover for race drones.
thingiverse
free
Taranis Transmitter Stand by DavidJohnson
...taranis transmitter stand by davidjohnson
thingiverse
transmitter stand from diy engineering episode 007
thingiverse
free
Tiny Whoop Gate by DavidJohnson
...tiny whoop gate by davidjohnson
thingiverse
a base to make gates for tiny whoop using a coat hanger.
thingiverse
free
Tiny Whoop Roll Cage by DavidJohnson
...tiny whoop roll cage by davidjohnson
thingiverse
a roll cage for the tiny whoop to protect your antenna.
thingiverse
free
ESC Armor by DavidJohnson
...he arm
2) slide cover over esc with the open bottom design.
3) fix with two small zip ties.
*indestructible from prop strikes.
;)
thingiverse
free
Drone Start Block by DavidJohnson
...des both level and staggered versions.
get more info on this item in episode 010 of diy engineering @https://youtu.be/rfqcrmzt7xc
thingiverse
free
RunCam 2 Adjustable Mount by DavidJohnson
...justable camera mount for the runcam 2
get more info on this item in episode 010 of diy engineering @https://youtu.be/rfqcrmzt7xc
thingiverse
free
Taranis DIY ORX Module Case (Tiny Whoop) by DavidJohnson
...iny whoop) by davidjohnson
thingiverse
a module case to house the orx diy transmitter to use with the taranis remote. tiny whoop
thingiverse
free
Nomad 883 Adjustable Backlash Nut by DavidJohnson
...w backlash nuts.
these are to be milled from delrin.
the full video can be found here:https://www.youtube.com/watch?v=xljahbsfhrq
thingiverse
free
Driver Tool Holder by DavidJohnson
...1vxmai9d79lahttps://www.thingiverse.com/davidjohnsonhttps://www.linkedin.com/in/david-johnson-69a2972https://github.com/dgjohnson
883
3d_export
$60
2009 Harley Davidson 883 3D Model
...ster 883 xl883 motorcycle cruiser custom boulevard american chopper hog
2009 harley davidson 883 3d model archcars 14606 3dexport
3d_export
$60
Architecture 883 3D Model
...lege campus max street landscape commercial building medical hospital offices
architecture 883 3d model lotusmodel 49300 3dexport
3ddd
$1
Toffe chair 883 - 55x55x60
...toffe chair 883 - 55x55x60
3ddd
табурет
poly: 2913
verts: 3288
3d_export
$75
Harley Davidson Iron 883 3D Model
...nightster modern chopper bobber sports motorcyclebike 3ds max 3d obj
harley davidson iron 883 3d model rendersteel 87260 3dexport
3d_export
$150
3d building 883 3D Model
...metropolis street block detailed definition realistic skyscraper huge collection
3d building 883 3d model kanhtart 46888 3dexport
3d_export
$50
3D Home 883 3D Model
... chair furniture texture table lamp apartment rug carpet restaurant hotel sitting
3d home 883 3d model richard3015 47328 3dexport
3d_export
$99
Harley Davidson Iron 883 2015 3D Model
... usa 2015 2016 racer harley-davidson iron sportster streetfighter 883
harley davidson iron 883 2015 3d model squir 92362 3dexport
cg_studio
$99
Harley-Davidson Iron 883 Roadster 20153d model
...3ds .obj .max - harley-davidson iron 883 roadster 2015 3d model, royalty free license available, instant download after purchase.
humster3d
$75
3D model of Harley-Davidson XLH 883 Sportster 2002
...f harley-davidson xlh 883 sportster 2002 in various file formats. all our 3d models were created maximally close to the original.
3d_export
$99
HarleyDavidson Iron 883 Roadster 2015 3D Model
...6 roadster racer harley-davidson iron sportster streetfighter
harleydavidson iron 883 roadster 2015 3d model squir 93249 3dexport
Nomad
turbosquid
$75
NOMAD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Nomad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
FUTURA / NOMADE
...futura / nomade
3ddd
futura
диван futura nomade. размеры: 1900x1030x h750.
3ddd
$1
Диван Gloster Nomad
...диван gloster nomad
3ddd
gloster , nomad
диван gloster nomad
design_connected
$11
Nomade Ottoman
...nomade ottoman
designconnected
ligne roset nomade ottoman poufs computer generated 3d model. designed by didier gomez.
design_connected
$27
Nomade Loveseat
...nomade loveseat
designconnected
ligne roset nomade loveseat 2-seater computer generated 3d model. designed by didier gomez.
design_connected
$27
Nomade Sofa
...nomade sofa
designconnected
ligne roset nomade sofa 2-seater computer generated 3d model. designed by didier gomez.
turbosquid
$69
Nomad Tent
...lty free 3d model nomad tent for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1572166)
turbosquid
$19
nomad character.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Skagerak Nomad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mod
design_connected
$13
MOD. 4233 - MOD. 4234 Table Lamp
...mod. 4233 - mod. 4234 table lamp
designconnected
arcahorn mod. 4233 - mod. 4234 table lamp computer generated 3d model.
design_connected
$11
MOD.1095
...mod.1095
designconnected
mod.1095 computer generated 3d model. designed by sarfatti, gino.
3ddd
$1
fireplaces mod Spec
...fireplaces mod spec
3ddd
камин
fireplaces mod spec 180x90x125h
3ddd
free
Flos Mod. 2129
... mod
фабрика: flos
модель: mod. 2129
описание: подвесной светильник, металл, белый, черный.
сайт: www.flos.com
turbosquid
$34
Mod Lamp.c4d
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$32
MOD A 001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Maars Mod
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Mod 70..
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
MOD Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Mod-Lite
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Air
3ddd
$1
Calligaris air
...calligaris air
3ddd
air , calligaris
cтул calligaris air
3ddd
$1
Air freshener
...air freshener
3ddd
air freshener , освежитель
air freshener
design_connected
$16
Air
...air
designconnected
flexform air lounge chairs computer generated 3d model. designed by antonio citterio.
turbosquid
$250
Heat pump air air
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
air
...air
3dexport
3ddd
$1
Кухня AIR
...кухня air
3ddd
air , мария
кухня air фабрики "мария"
3ddd
$1
Лампа AIR
...лампа air
3ddd
boconcept , air
настольная лампа air, boconcept. в50½xø32см
3d_export
$40
air deflector
...air deflector
3dexport
air deflector
3d_export
$15
air purifier
...air purifier
3dexport
air purifier
3d_export
$5
macbook air
...macbook air
3dexport
macbook air
Pro
turbosquid
$29
Pro
...ree 3d model mac pro for download as obj, c4d, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1505782)
turbosquid
$15
Apple Mac Pro and Pro Display
...ee 3d model apple mac pro and pro display for download as max on turbosquid: 3d models for games, architecture, videos. (1417078)
3d_export
$5
iphone 13 pro max and pro
...3 pro max and 13 pro the model is made in four colors (graphite, gold, silver, and blue), all of which are attached in the files.
3d_export
free
sapphire pro
...sapphire pro
3dexport
sapphire pro 3d printer head mask
3d_export
$4
macbook pro
...macbook pro
3dexport
macbook pro 13" inch 2020 years model
3ddd
free
GentleLase Pro
... syneron , candela
gentlelase pro аппарат для лазерной эпиляции
turbosquid
$25
PRO frame
...rbosquid
royalty free 3d model pro frame for download as max on turbosquid: 3d models for games, architecture, videos. (1148329)
turbosquid
$5
Alien pro
...osquid
royalty free 3d model alien pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1678446)
turbosquid
$5
iphone11 pro
...uid
royalty free 3d model iphone11 pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1562707)
3ddd
$1
Mac Pro (appel)
...mac pro (appel)
3ddd
компьютер , apple
mac pro