Nintendo Switch Grips (portable mode) v2 by morris4019

Last crawled date: 3 years ago

This design is going to be deleted after my lawyer says i no longer require it to be public, and/or exist. get it if/when you still want it.
Tested left, and printing right side now. This is a complete redesign of the original with all measurements and modeling done by myself.
MUCH Inspiration from http://www.thingiverse.com/thing:2160493 and http://www.thingiverse.com/thing:2154057 so kudos to them.
I was having difficulty modifying the original models the way i wanted so I took the calipers out and had at measuring. I also wanted a slightly different design of the grip itself (to lend itself for future ninjaflex). There are still one or two little tweaks i'd like to make to this one, but the base is here.
I would recommend printing at 25%+ infill to ensure that the connection of the grip to the spacer is strong (this is one of the little tweaks i'd like to make... adding a bit more of an angle, say 45% on one side). I've printed at 15 and it is sturdy but i like to know it's not going to break mid battle. Also, same as before, this prints upright with the grip touching the buildplate. Print with supports touching buildplate.
As requested, i've included the FreeCad project of this model