Thingiverse
Nimble Gimbal For 2020 Delta Frame by quadcells
by Thingiverse
Last crawled date: 3 years, 1 month ago
I saw slonold's Nimble Gimbal and liked the Idea. slonold did a great job on his design. I needed to modify it for my application.
I needed to make the arms wider at the bottom so it would mount on a 2020 aluminum
extrusion beam.
I want to use M4 bolts to attach the arms to the 2020 beam so I increased the M3 holes
to M4. (A little over kill)
I have a dozen 624 bearings and wanted to utilize them. I increased the size of the
bearing housing to accommodate the 13mm x 5mm bearing size of the 624's.
Also used four bearings instead of the two in the original design. (A little over kill)
Needed supplies:
Print one set of arms and one extruder_mount_bracket.
6 M4 x 16mm bolts, 4 for the arms to bolt to the 2020 beam and 2 for the bearings.
4 M4 x 20mm bolts for mounting the Zesty Extruder Motor mount to the gimbal bracket.
18 M4 flat washers (8 for the 4 bolts to mount the Zesty Motor mount to the gimbal bracket
(optional), 4 for the M4 bolts that mount the arms to the 2020 beam (optional) and 6 for
the M4 bolts that make up the two bearing assemblies).
6 M4 nylon lock nuts, 4 for the Zesty motor mount to gimbal bracket and 2 for the arms to
gimbal bracket.
4 M4 'T' nuts for the M4 bolts the attach the arms to the 2020 beam.
4 624 size bearings.
Assembly Instructions:
Assemble the bearings first by using 1 M4 x 16mm bolt, 3 M4 washers and 1 nylon lock nut. Slide 1 M4 washer onto the bolt followed by a 624 bearing, then another M4 washer followed by a 2nd 624 bearing. Then slide the third M4 washer and lastly the nylon lock nut. Now tighten the bearing assembly. Make one more assembly.
Take 1 bearing assembly and insert it into the bearing housing on the motor bracket button head first. Do the same for the other bearing assembly.
Please see the provided photos for assembly.
I needed to make the arms wider at the bottom so it would mount on a 2020 aluminum
extrusion beam.
I want to use M4 bolts to attach the arms to the 2020 beam so I increased the M3 holes
to M4. (A little over kill)
I have a dozen 624 bearings and wanted to utilize them. I increased the size of the
bearing housing to accommodate the 13mm x 5mm bearing size of the 624's.
Also used four bearings instead of the two in the original design. (A little over kill)
Needed supplies:
Print one set of arms and one extruder_mount_bracket.
6 M4 x 16mm bolts, 4 for the arms to bolt to the 2020 beam and 2 for the bearings.
4 M4 x 20mm bolts for mounting the Zesty Extruder Motor mount to the gimbal bracket.
18 M4 flat washers (8 for the 4 bolts to mount the Zesty Motor mount to the gimbal bracket
(optional), 4 for the M4 bolts that mount the arms to the 2020 beam (optional) and 6 for
the M4 bolts that make up the two bearing assemblies).
6 M4 nylon lock nuts, 4 for the Zesty motor mount to gimbal bracket and 2 for the arms to
gimbal bracket.
4 M4 'T' nuts for the M4 bolts the attach the arms to the 2020 beam.
4 624 size bearings.
Assembly Instructions:
Assemble the bearings first by using 1 M4 x 16mm bolt, 3 M4 washers and 1 nylon lock nut. Slide 1 M4 washer onto the bolt followed by a 624 bearing, then another M4 washer followed by a 2nd 624 bearing. Then slide the third M4 washer and lastly the nylon lock nut. Now tighten the bearing assembly. Make one more assembly.
Take 1 bearing assembly and insert it into the bearing housing on the motor bracket button head first. Do the same for the other bearing assembly.
Please see the provided photos for assembly.
Similar models
thingiverse
free
Railcore Zesty Nimble Motor Mount
...lon locking nuts to hold it together. that is your choice. supports will help the holes to turn out better, but are not required.
thingiverse
free
Nimble Gimbal - Gimbaling Extruder Motor Mount for Zesty Nimble by slonold
...?). with the x60 i went with a 0.3mm nozzle and 0.2mm extrusion width, 3 perimeters, 0.125 layer height and 5 top/bottom layers.
thingiverse
free
3030 Extrusion Gimbal mount for Zesty Nimble for a Hypercube Evolution by kuhnikuehnast
... to mount everything to the frame.
if you have any ideas to improve the nimble, just leave a comment and i'll try my best :-)
thingiverse
free
SQ12 Mount and Holder for 2020 Extrusion by IndoMakers
...rofile
nuts and bolts?
2x 2020 m5 hammer nut
2x m5 x 10mm bolts
1x m4 ordinary nuts or nylon lock nuts
1x m4 x 15mm or 20mm bolts
thingiverse
free
FolgerTech 2020 Y Axis Idler Bearing Holder by JWag
...er over the bolt and thread on the nylock
attach the holder to the 2020 frame with m5 bolts and t-nuts.
tension your y-axis belt.
thingiverse
free
Rusa bowden extruder gear by urusa
...tes the m5 bolts.
the shaft is fixed to the motor rotation.
secure the mk7 extrusion gear to the m5 bolts.
the gear ratio is 1/3.
thingiverse
free
Anet A8 Plus y motor anti swing by stefanobatt
...ide in the profile the 2 back t-nut.
mount on the rear of the motor and trim the screw to touch the motor. do not push the motor.
thingiverse
free
Foldable wall mount for 16mm pipe by sjostedt
...adjustments to get the pipe perfectly horizontal.
the pipe clamp in the image is this: https://www.thingiverse.com/thing:2481549
thingiverse
free
Sovol SV01 Titan Aero Adaptor plate by thedead1
... includes a valley for routing the stepper motor cable.
the bracket can be printed in any material with at least %30 plus infill.
thingiverse
free
Ultimaker 2 - Zesty Nimble V2 & E3D V6 upgrade by MacNite
...is an additional slide-on cover to "hide" the stepper motor assembly away and make everything look tidy.
not tested yet
Quadcells
thingiverse
free
Tekno Wing Spacers by quadcells
...ds 2x 55mm flat head bolts
36mm-needs 2x 55mm flat head bolts
34mm-needs 2x 50mm flat head bolts. this is the one i am using now.
thingiverse
free
PanelDue 7i Enclosure by quadcells
...nnel mount case is for a 7 not a 7i.
i put a access hole for the micro sd card slot. not totally happy the way the hole came out.
thingiverse
free
Tekno MT410 Wire Management by quadcells
...anding wires-use two "parta"
secure wires use 1 "parta" and 1 "partb"
you will need small zip ties.
thingiverse
free
Tekno MT410 Rear Arm Guards by quadcells
...ssis of the rc vehicle.
hardware needed:
4 m3 x 8mm button head bolts.
update 12/11/2020
added 2 new sets that are 20mm taller
thingiverse
free
Taranis X9E Battery Holder by quadcells
....
i used a qidi tech x-one 3d printer.
simplify3d for a slicer software.
abs red 1.75mm filament, but you can use pla and pla/pha
thingiverse
free
Traxxas Slash 4x4 Body Mount (Extended) by quadcells
...fit correctly so i needed to change the height of the body mounts. after a couple designs i came up with these 3 different sizes.
thingiverse
free
FT Sea Duck Float strut by quadcells
...t) to the wing of the ft sea duck by flitetest.
i used abs so i could do a acetone vapor bath post print to smooth out the print.
thingiverse
free
Traxxas Slash 4x4 Body Mount Spacers by quadcells
... has more strength than the mounts that i 3d printed.
these spacers help raise the body over the chassis for a better custom fit.
thingiverse
free
Tekno MT410 Capacitor Holder (Glitch Buster) by quadcells
...at-set inserts for plastic, brass, m3 x 0.50 mm thread size, 3.800 mm
installed length mcmaster-carr
1 m3 x 6mm button head bolt.
thingiverse
free
Tekno MT410 Thumbwasher Body Mounts by quadcells
... threaded studs for the rear post and 2 m4 x 6mm button head bolts for the front post.
update 12/10/2020
added body_post_65mm.stl
Nimble
thingiverse
free
Nimble Inside by ZestyTech
...uder you can buy, it has ample torque and can be mounted in multiple orientations.
the nimble is available from zesty technology.
thingiverse
free
Nimble V1 and Nimble V2 on the E3D Toolchanger
...uder you can buy, it has ample torque and can be mounted in multiple orientations.
the nimble is available from zesty technology.
thingiverse
free
Mockup of the Dual Nimble aka Nimble C/C by ZestyTech
...uder you can buy, it has ample torque and can be mounted in multiple orientations.
the nimble is available from zesty technology.
thingiverse
free
Nimble V2 mount for Tevo TLM
...uder you can buy, it has ample torque and can be mounted in multiple orientations.
the nimble is available from zesty technology.
thingiverse
free
HevoRT Nimble V2 + Kryo mount
...hevort nimble v2 + kryo mount
thingiverse
this is a remix of miragec caridge to accommodate the nimble v2 and kryo
thingiverse
free
Nimble V2 mount for the BLV Cube
...uder you can buy, it has ample torque and can be mounted in multiple orientations.
the nimble is available from zesty technology.
thingiverse
free
Nimble Sidewinder V1.1 on a HEVO by ZestyTech
...er you can buy, it has ample torque and can be mounted in multiple orientations.
the nimbles are available from zesty technology.
thingiverse
free
Nimble V2 mount for the Artemis effector
...uder you can buy, it has ample torque and can be mounted in multiple orientations.
the nimble is available from zesty technology.
thingiverse
free
Zesty Nimble Mount for Tevo Tarantula
...esty nimble mount for tevo tarantula
thingiverse
this is my zesty nimble mount for the tevo tarantula which i used in our video.
thingiverse
free
Nimble v2 Bowden mount
... the front screw mount is not a perfect alignment but it works.
i recommend to get it sls printed. i do not recommend shapeways.
Gimbal
thingiverse
free
Gimbal by tannermichael
...amera and gravity to self level. the gimbal uses .125" axles to pivot on. this gimbal was made using autodesk inventor 2015.
thingiverse
free
2020 Gimbal
...2020 gimbal
thingiverse
2020 gimbal
thingiverse
free
Gimbals and gimbals plus gyro by pillcorema1991
... designed by brandonw6, i decided to add a metal gyro to show student pilots how a gyro stays rigid in space once it is spinning.
thingiverse
free
TBS Discovery Gimbal mount for g3 gimbal by Irfan5911
...tbs discovery gimbal mount for g3 gimbal by irfan5911
thingiverse
tbs discovery gimbal mount for g3 gimbal
thingiverse
free
gimbal by Ponkin
...gimbal
gimbal 5208 motor mount
i still did only a test version
will finalize it before the end
sorry for my english language :)
thingiverse
free
gimbal by flyingfisher
...gimbal by flyingfisher
thingiverse
gimbal with minimazed backlash.
recomended layer height - 0.1 mm
thingiverse
free
Gimbal by casaluce
...gimbal by casaluce
thingiverse
i made this gimbal as a functional print test with a single extruder.
thingiverse
free
CELLPHONE GIMBAL ĐẾ GIMBAL ĐIỆN THOẠI by thuankts
...cellphone gimbal đế gimbal điện thoại by thuankts
thingiverse
cell phone gimbal 2 axis xcam
thingiverse
free
damper gimbal by cristiandebahia
...damper gimbal by cristiandebahia
thingiverse
damper gimbal
thingiverse
free
Gimbal H501S by SackeProduction
...gimbal h501s by sackeproduction
thingiverse
gimbal h501s
Delta
thingiverse
free
Delta
...delta
thingiverse
new-delta
thingiverse
free
Thor-Delta
...thor-delta
thingiverse
this is the thor-delta 1 rocket that delivered the skynet satellite to orbit.
thingiverse
free
Delta Plane/Avión Delta by Enriquepc3d
...n con una configuración delta desarrollado en un proyecto de universidad. el avión consta de 5 partes impresas de forma separada.
thingiverse
free
Freeplug delta by luap62
...freeplug delta by luap62
thingiverse
for freebox delta
thingiverse
free
Lancia Delta by Soyelflaco
...lancia delta by soyelflaco
thingiverse
lancia delta
thingiverse
free
LANCIA DELTA by _GABBER
...lancia delta by _gabber
thingiverse
lancia delta gadget
thingiverse
free
delta test by olo2000pm
...delta test by olo2000pm
thingiverse
delta test
140x140
thingiverse
free
Delta Tricopter by zdar
...delta tricopter by zdar
thingiverse
a delta style tricopter.
thingiverse
free
Delta ring
...delta ring
thingiverse
:)
thingiverse
free
The delta tensioning by RuiJan1
...the delta tensioning by ruijan1
thingiverse
this is a delta prenter the arm tensioning
2020
thingiverse
free
2020
...2020
thingiverse
2020
thingiverse
free
2020
...2020
thingiverse
2020
thingiverse
free
2020
...2020
thingiverse
2020
thingiverse
free
Viken 2020
...viken 2020
thingiverse
viken 2020
thingiverse
free
2020 Gimbal
...2020 gimbal
thingiverse
2020 gimbal
thingiverse
free
2020 Bowl
...2020 bowl
thingiverse
2020 bowl
thingiverse
free
2020 Gyroid
...2020 gyroid
thingiverse
2020 gyroid
thingiverse
free
Trump 2020
...trump 2020
thingiverse
trump 2020
thingiverse
free
Rat 2020
...rat 2020
thingiverse
rat 2020
thingiverse
free
2020 lm8uu
...2020 lm8uu
thingiverse
lm8uu 2020 bosch
Frame
thingiverse
free
Sunglasses Frame
...sunglasses frame
thingiverse
sunglasses frame for broken frames.
thingiverse
free
Frame by reulew
...frame by reulew
thingiverse
frame
thingiverse
free
frame by mmireles
...frame by mmireles
thingiverse
frame
thingiverse
free
formwork frames
...formwork frames
thingiverse
model frame
thingiverse
free
Frame Stand for 15x10 picture frame by sorteds
...frame stand for 15x10 picture frame by sorteds
thingiverse
just an easy frame stand for a 15x10 picture frame
thingiverse
free
Frame Depot Picture Frame Hook by madpilot
...ws the picture frame to sit perfectly flush with the wall.
requires 2 x 1.2mm diameter bullet head nail to insert in to the wall.
thingiverse
free
Frame by Portalsg
...frame by portalsg
thingiverse
to create the bicycle frame of carbon fiber
thingiverse
free
frame for a plane
...frame for a plane
thingiverse
frame form a 1920s stile race plane
thingiverse
free
Framed D12
...framed d12
thingiverse
a d12 modeled by a sphere encased in a dodecahedron frame.
thingiverse
free
Picture frame
...picture frame
thingiverse
a fun picture frame for a 4 by 6 inch photo