Thingiverse
Neustruder Upper Block ReMix
by Thingiverse
Last crawled date: 4 years, 2 months ago
I built a Neustruder for my Ender 3. The printer architecture made some elements of the install a bit awkward. This re-mix of the upper block addresses one of those.
The left side upright makes it difficult to get an wrench (or hex drive screwdriver) on screws that are on the front face. It is much easier to do that from the back. This remix puts reliefs to hold nuts on the face of the upper block, allowing the block to be tightened from the back. The ability to see how much the screw extends from the nut also helps with even tightening.
Print this the same was the original was printed, no special instructions are needed.
As a side note, the Z axis screw interferes with use of a large fitting on the input side. As I wanted one on the output side, I added a bit of 4mm OD 2mm ID stainless tubing on the input side as a guide for the filament to avoid the potential for erosion by the moving filament on the extruder body (something I found out about the hard way). A short piece of bowden tube would do as well if it can be adequately secured.
Alternatively, you could rotate the neustruder body orientation & have plenty of room as well as being able to see the screw engagment of the nuts in the original reliefs but you would need to reverse the stepper motor direction.
The left side upright makes it difficult to get an wrench (or hex drive screwdriver) on screws that are on the front face. It is much easier to do that from the back. This remix puts reliefs to hold nuts on the face of the upper block, allowing the block to be tightened from the back. The ability to see how much the screw extends from the nut also helps with even tightening.
Print this the same was the original was printed, no special instructions are needed.
As a side note, the Z axis screw interferes with use of a large fitting on the input side. As I wanted one on the output side, I added a bit of 4mm OD 2mm ID stainless tubing on the input side as a guide for the filament to avoid the potential for erosion by the moving filament on the extruder body (something I found out about the hard way). A short piece of bowden tube would do as well if it can be adequately secured.
Alternatively, you could rotate the neustruder body orientation & have plenty of room as well as being able to see the screw engagment of the nuts in the original reliefs but you would need to reverse the stepper motor direction.
Similar models
thingiverse
free
Neustruder Bowden Extruder by Lukes_Laboratory
... will extrude properly. flexible filaments may require additional revolutions to properly extrude. at this point, happy printing!
thingiverse
free
Ender 3 Filament Guide
...icient. pla of petg would be acceptable for this part.
i have included the fusion 360 file if you need/want to remix this. enjoy.
thingiverse
free
HTC Vive Tracker Dock with Side-Tightening Wheel by matzman666
...zations, and one that can be mounted on a picatinny rail.
four m3x6 screws required for connecting lower and upper body together.
thingiverse
free
Neustruder Flexibles extruder for CR-10 and Ender 3 by Lukes_Laboratory
... will extrude properly. flexible filaments may require additional revolutions to properly extrude. at this point, happy printing!
thingiverse
free
BTT TFT35 V3 Ender 5 Plus by lnwulf
...d that the original "wiggled" too much on my printer when mounted. i added two additional screws to the block as well.
thingiverse
free
CR-10 Filament guide with Bowden tube by Blitzace
...piece that doesn't need the fitting.
notes: please use supports from buildplate only. i used 20% infill but you can use more.
thingiverse
free
Dual Filament Guide by AlexSteele
...
mounted to the wall with standard wood screws.
video feed from octoprint as this was being built: https://youtu.be/lpqwdzsf14g
thingiverse
free
Anet ET4 Filament Holder Simple and effective by Dualpod
...tighten the holder nuts too much. tighten the nuts a bit loose, so the filament can rotate freely.
hope this helps the community.
thingiverse
free
Prusa i3 Hotbed Cable Strain Relief by RostockMini4tw
...add the upper parts and fixate the complete block by tightening the m3 screw. last tighten the cable tie to fixate the loom tube.
thingiverse
free
Flashforge Adventurer 3 - Filament guide remix by rinkel
...some tinkering is required.
print it as-is and use supports. (filement opening faced down)
all credits go to the original author.
Neustruder
thingiverse
free
Neustruder Bowden Extruder by Lukes_Laboratory
... will extrude properly. flexible filaments may require additional revolutions to properly extrude. at this point, happy printing!
thingiverse
free
Neustruder Flexibles extruder for CR-10 and Ender 3 by Lukes_Laboratory
... will extrude properly. flexible filaments may require additional revolutions to properly extrude. at this point, happy printing!
thingiverse
free
Neustruder Direct Drive For Wanhao i3/Makerselect/Prusa i3, Ect. by Lukes_Laboratory
... 5-10mm m3 screws
(3) m3 nuts
let me know of the problems you have or how i can improve the instructions to help. happy printing!
Upper
3d_export
$19
Upper ab machine
...upper ab machine
3dexport
turbosquid
free
Upper and Lower Teeth
...ree 3d model upper and lower teeth for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1636970)
turbosquid
$23
Upper Body Sculpting
...ree 3d model upper body sculpting for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1540095)
turbosquid
$2
Kartell Upper Ladder
...l kartell upper ladder for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1214137)
turbosquid
$18
Upper Lateral Incisor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Male Upper Body
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Upper Kitchen Wardrobe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
set of upper kitchen modules
...t of standard upper kitchen modules, according to real working dimensions. there are few accessories, such as hinges and awnings.
turbosquid
$2
modeling the upper part of a robot
... 3d model modeling the upper part of a robot for download as on turbosquid: 3d models for games, architecture, videos. (1672422)
turbosquid
$49
Upper First Left Bicuspid
...model upper first left bicuspid for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1281409)
Block
archibase_planet
free
Blocks
...blocks
archibase planet
blocks bricks toy
toy blocks - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Block
...block
3dexport
3d_export
$10
The guillotine and the block
...the guillotine and the block
3dexport
the guillotine and the block autocad 2013
3d_ocean
$8
Concrete Blocks
... blocks, barriers or cover for characters during a fire fight. each one has its own diffuse map, specular and normal map in tg...
archibase_planet
free
Glass block
...glass block
archibase planet
glass block brick
glass block n211009 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$99
city block
...city block
3dexport
city block 3d model. include max, obj and fbx files.
3d_ocean
$3
Concrete Blocks Textures
...res
3docean
block blocks concrete seamless wall walls
a couple of seamless textures with two differents sizes of concrete blocks.
3d_export
$5
plummer block
...plummer block
3dexport
this is an 3d model of plummer block assembly where seven parts are required to assemble this.
design_connected
$16
Block 2
...block 2
designconnected
henry pilcher block 2 computer generated 3d model. designed by pilcher, henry.
3d_export
$7
concrete blocks on pallets
...concrete blocks on pallets
3dexport
concrete blocks on pallets, 3 types of blocks. there are all the necessary textures.
Remix
turbosquid
$5
MODA Collection Remix Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
remix yamaha rm1x
...remix yamaha rm1x
3dexport
geometry triangles 15.2k vertices 7.6k pbr no textures 1 materials 1 uv layers yes
3d_ocean
$5
Vray fabric Kvadrat remix green - tileable
...th vray and 3dsmax. high-resolution texture images (2000×2000 px) file included: shader vray 2.40 texture image 3ds max 2011 file
turbosquid
$20
Gerrit Rietveld 1938 Zig Zag Chair Remix
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
multicolored remix parametric table furniture
... fbx, obj, mtl, archive with textures. the model has no glitches. render and materials - vray . without using plugins. good use!
3ddd
$1
Barovier&Toso / Manhattan Remix 7192
... 004293-142405
в коллекции есть люстры 7, 9, 12 рожковые. диаметр соответственный 1000, 1250, 1500 мм.
3ddd
$1
Muuto fiber chair
...grey/grey, dusty green/dusty green, nature/oak, natural white/oak upholstery options remix 183/black, remix 133/grey, remix 643/dusty red leather options black...
3ddd
$1
Barovier&Toso 7190-7195
...7190-7195 3ddd barovier&toso потолочнай люстра фабрики barovier&toso;, коллекция manhattan remix артикул 7190-7195. размеры в inches: 39"...
3d_export
$5
3D Locking Handle Weatherproof Storage Box Container
...handle weatherproof storage box container 3dexport new, improved and remixd! no screws required. print-in-place. weatherproof. parametric. 2 parts. easy...
cg_studio
$49
HTC One Mini 2 Amber Gold3d model
...cell phone mobile cellular super lcd touchscreen touch screen remix amber gold .max .obj .mb .lwo .fbx .c4d .3ds...