Thingiverse
Nerf Rebelle Messenger Barrel by haphazardlynamed
by Thingiverse
Last crawled date: 3 years, 4 months ago
Experimental 'choked' barrel for the Rebelle Messenger
the concept is to have a relatively loose fit around the dart for the majority of the barrel.
but a tighter sealing choke section at the front.
This should have similar benefits of a tight barrel seal, but with less friction.
In particular, fdm 3d printing usually causes excess friction from the layer grooves; this is an attempt to mitigate that effect.
Should Not be Used unless the Messenger has first been upgraded to a heavier spring and improved plunger head seal. The stock spring is not suitable for a tighter barrel fit.
Note: Dimensional Accuracy
this was modeled under the assumption that FDM printing will 'shrink' the inside diameters of circles.
While the Mesh model has a choke ring diameter of about 12.5mm. the Physical dimension should come to about 12.3mm.
Different Printers/Filaments may need to use Dimensional Compensation slicer settings.
the concept is to have a relatively loose fit around the dart for the majority of the barrel.
but a tighter sealing choke section at the front.
This should have similar benefits of a tight barrel seal, but with less friction.
In particular, fdm 3d printing usually causes excess friction from the layer grooves; this is an attempt to mitigate that effect.
Should Not be Used unless the Messenger has first been upgraded to a heavier spring and improved plunger head seal. The stock spring is not suitable for a tighter barrel fit.
Note: Dimensional Accuracy
this was modeled under the assumption that FDM printing will 'shrink' the inside diameters of circles.
While the Mesh model has a choke ring diameter of about 12.5mm. the Physical dimension should come to about 12.3mm.
Different Printers/Filaments may need to use Dimensional Compensation slicer settings.
Similar models
thingiverse
free
Nerf Rebelle Messenger Grip by haphazardlynamed
..., and modded barrels (such as brass) be used. the 3d printed barrels in photo are here: https://www.thingiverse.com/thing:4659172
thingiverse
free
Air Rifle Silencer for Crosman 1077 by RandomEskimo
...strips of tape to ensure a smooth friction fit and keep the rough plastic from wearing the end of the barrel when printed in pla.
thingiverse
free
Alpha/omega Threaded Barrel by ThatBoyJacob
...y require some sanding to get the brass to fit nicely. a brass barrel is a tighter fit for darts and should increase performance.
thingiverse
free
Bullet Bill Stand
...i these pieces should be a friction, fit if your printer prints oversized which many do, it may be a tighter fit but it will fit.
thingiverse
free
friction mount snap cap for 1/2 NPT pipe by cfishy
...nt snap cap for 1/2 npt pipe by cfishy
thingiverse
printed it in pet+ and pla, it should friction fit the inner diameter nicely.
thingiverse
free
Trypo-B127 by rutomoda
...sla (smallest dimension is 0.5mm, angles are optimized for supportless printing).
the halves are held together by a friction fit.
thingiverse
free
Snapmaker 2 universal rewind spool holder
...ol from https://www.thingiverse.com/thing:3122921 for easier access to the screw.
the spring fits into the hub with friction fit.
thingiverse
free
KronoMag NED Remix Parts by NortheastDesigns
...g:2884602
update: no longer necessary to print myvenom's magwell at 1.02 scale. he has made the magazine fitment much better.
grabcad
free
Broad Head slug
...se broad head slug for a 12 ga smooth bore shotgun. should fit through a full choke better to measure choke diameter before use.
thingiverse
free
Traxxas X-Maxx servo saver spacer/preloader by sashan13
...e upgraded the servo and dont have silver traxxas spring.
print with 2+mm thick walls or 100% infill. the spring is damn strong.
Haphazardlynamed
thingiverse
free
Nerf Strongarm Spring Spacer by haphazardlynamed
...9;t interfere with slam-fire (old version -deleted- had issues)
note: installs on the rear end of spring, not on the plunger head
thingiverse
free
Dart Zone Pro MK2 Safety Delete by haphazardlynamed
...drop in replacement for the safety switch, to disable the function without leaving a hole in the blaster.
prints without supports
thingiverse
free
Nerf Rival Perses Hopper Lock by haphazardlynamed
...door from opening.
useful if doing a cut door (mini door) mod; since you'll want to main flap to stay shut as no longer used.
thingiverse
free
Adventure Force Spectrum Cheek Rest by haphazardlynamed
... make it uncomfortable to get a 'cheek weld' on.
i designed this smooth cover for the stock to provide a nice cheek rest.
thingiverse
free
Dodecahedron Star Ornament by haphazardlynamed
...rials with visible infill for best effect.
fair warning: after snapping together 42 hard, sharp, plastic pieces; my fingers hurt.
thingiverse
free
Adventure Force Spectrum Magazine Release by haphazardlynamed
...nd drum
-original mag release would hit a bump on the rear of those magazines and interfere with removal.
prints without supports
thingiverse
free
Adventure Force Nexus / Aeon Pro Safety Delete by haphazardlynamed
...
replaces the safety lock, so you can disable the function but not have a hole in the side of the blaster
prints without supports
thingiverse
free
Nerf Knockout Automatic Breech Open by haphazardlynamed
...com/r/nerf/comments/lcb1o1/knockout_automatic_breech_open_3d_printed_mod/
print part in orientation as provided, supports needed.
thingiverse
free
Nerf Rebelle Star Shot, Air Restrictor Removal by haphazardlynamed
...rts to be inserted about 14mm further in, for more effective barrel length.
may also work on the nerf firestrike, but not tested.
thingiverse
free
Nerf ICON Specter Rev-5 Spring Spacer by haphazardlynamed
...rsion)
(might also work on elite specter rev-5)
increases fps from 65, to 70-ish.
installs on rear of spring, not on plunger head
Messenger
3d_export
$18
shilla-messenger room 12
...shilla-messenger room 12
3dexport
shilla-messenger room 12<br>3ds max 2015
turbosquid
$25
Canvas and Leather Messenger Bag
...s and leather messenger bag for download as c4d, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1700290)
turbosquid
$49
Hermes Winged Messenger Helmet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$18
eunuch-big food messenger room-indoor
...eunuch-big food messenger room-indoor
3dexport
eunuch-big food messenger room-indoor<br>3ds max 2015
turbosquid
$39
Student messenger Bag 2 (Blue)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Student messenger Bag 7 (Purple & Magenta)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Student messenger Bag 6 (Blue & Salmon)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Student messenger Bag 5 (Salmon & Blue)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Cartoon Messenger bike Origami Toy bike low
...toon messenger bike origami toy bike low for download as max on turbosquid: 3d models for games, architecture, videos. (1629727)
3d_export
$5
messenger logo
...max 2015,blender,cinema4d obj fbx stl warning:dont forget to active turbosmooth after final modeling. enjoy 3d modeling good luck
Rebelle
turbosquid
free
Rebel Spaceship
...id
royalty free 3d model rebel spaceship for download as obj on turbosquid: 3d models for games, architecture, videos. (1155820)
turbosquid
$18
road rebel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Rebel Radar
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Eglo 89062 Rebel Aluminium
...eglo 89062 rebel aluminium
3ddd
eglo
eglo 89062 rebel aluminium
turbosquid
$69
slave rebell michelangelo
...y free 3d model slave rebell michelangelo for download as stl on turbosquid: 3d models for games, architecture, videos. (1376924)
turbosquid
$39
Rebel Fishing Lure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$33
Male rebel boy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Merx Rebel + Globus - TVS
...merx rebel + globus - tvs
3ddd
merx
стол merx globus-tvs 140x90x75(h)
стулья merx rebel bianco
3d_export
$5
honda cmx 250 rebel
...honda cmx 250 rebel
3dexport
honda motorcycle
turbosquid
$20
Endor Rebel Trooper armed
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Nerf
turbosquid
$30
Nerf Soaker
...osquid
royalty free 3d model nerf soaker for download as obj on turbosquid: 3d models for games, architecture, videos. (1255038)
turbosquid
$9
Nerf Gun
...urbosquid
royalty free 3d model nerf gun for download as c4d on turbosquid: 3d models for games, architecture, videos. (1200860)
turbosquid
$1
Nerf Doubledown
... model nerf doubledown for download as jpg, 3ds, max, and fbx on turbosquid: 3d models for games, architecture, videos. (1477201)
turbosquid
$50
Nerf Clip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Nerf Dart
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Nerf Picatinny Rail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Nerf Gun Low Poly
...royalty free 3d model nerf gun low poly for download as blend on turbosquid: 3d models for games, architecture, videos. (1632641)
3d_export
$19
nerf n-strike elite rough cut - 3d scan
...nerf n-strike elite rough cut - 3d scan
3dexport
free3d
$15
Nerf Darts
...nerf darts
free3d
nerf darts for any nerf gun!
thingiverse
free
Pistola a dardi NERF (Nerf Gun) by ruggeromarzocca
...pistola a dardi nerf (nerf gun) by ruggeromarzocca
thingiverse
nerf gun, pistola nerf...
Barrel
3d_ocean
$4
Barrel
...barrel
3docean
low poly medi evil barrel wood barrel
barrel, wood barrel, low poly,
3d_ocean
$12
Barrel
...barrel
3docean
barrel barrique drink oak barrel vine wood
a new barrel
3d_ocean
$3
Barrel
...barrel
3docean
barrel furniture
a high quality barrel .
3d_ocean
$4
Barrel
...barrel
3docean
barrel
a lowpoly barrel which is ready to use .
3d_export
$10
barrel
...barrel
3dexport
barrel
3d_export
$5
barrel
...barrel
3dexport
barrel
3d_export
$8
barrel
...barrel
3dexport
lolipop barrel
3d_export
$5
barrel
...barrel
3dexport
!!!radioactive barrel!!!
3d_export
free
barrel
...barrel
3dexport
old barrel
3d_export
$5
Barrel
...barrel
3dexport
high wooden barrel. reconstruction of medieval scandinavian barrel (viking age).