Thingiverse
Nerf Automatic Pusher by kuryaka
by Thingiverse
Last crawled date: 3 years ago
Update 11-18-18
Major update: Lengthened slightly and added dwell for more stability. Fire control tabs added if you want to put in a Cherry submini switch for fire control. Old version is still available in Minimal_Pusher.zip.
=====
This scotch yoke pusher design is designed to be a more stable variant for a printed autopusher. The minimal version is good for those builds where you want to put an auto-pusher in a Stryfe/Rayven/etc.
Compared to a Rapidstrike pusher, this gets rid of two "unnecessary" small gears and relocates the motor. It also increases the gear ratio to 40:1, which enables the motor relocation but boosts fire rate by 50%.
Recommended usage on 2S with either Fang Revamped for 13-14 dps or a torquey 3S motor for 9-10 dps.
Required additional components:
1xx size hobby motor
M2x5 motor mounting screw
4-40 nut (2)
4-40 screw - 3/8" or 1/2", any head (2)
Rapidstrike worm gear or half of an Ajax Scientific worm gear (https://www.amazon.com/Ajax-Scientific-Plastic-0-82cm-Diameter/dp/B00EPQMKHQ/)
3/32" steel pin as axle. Alternate components can be substituted - a stiff piece of wire was used once during testing.
Major update: Lengthened slightly and added dwell for more stability. Fire control tabs added if you want to put in a Cherry submini switch for fire control. Old version is still available in Minimal_Pusher.zip.
=====
This scotch yoke pusher design is designed to be a more stable variant for a printed autopusher. The minimal version is good for those builds where you want to put an auto-pusher in a Stryfe/Rayven/etc.
Compared to a Rapidstrike pusher, this gets rid of two "unnecessary" small gears and relocates the motor. It also increases the gear ratio to 40:1, which enables the motor relocation but boosts fire rate by 50%.
Recommended usage on 2S with either Fang Revamped for 13-14 dps or a torquey 3S motor for 9-10 dps.
Required additional components:
1xx size hobby motor
M2x5 motor mounting screw
4-40 nut (2)
4-40 screw - 3/8" or 1/2", any head (2)
Rapidstrike worm gear or half of an Ajax Scientific worm gear (https://www.amazon.com/Ajax-Scientific-Plastic-0-82cm-Diameter/dp/B00EPQMKHQ/)
3/32" steel pin as axle. Alternate components can be substituted - a stiff piece of wire was used once during testing.
Similar models
thingiverse
free
Nerf Rapidstrike Pusher-Motor Cover by TheLoneWolf052
...ized pusher motor in a rapidstrike. it is designed to allign with the grooves on the rapidstrike, so it blends in with the looks.
grabcad
free
Robotic gripper with worm gears
...per with worm gears
grabcad
robotic gripper with worm gears
nema 17 stepper motor
4 bearings 3-8-3
skf 619 bearing for the screw
thingiverse
free
rapidstrike 180 pusher motor cover by Antichamber
...s is a 3d model that you place over the hole that is made when you upgrade the pusher motor in a rapidstrike to a 180 sized motor
thingiverse
free
Nerf Rapidstrike extened pusher by tungstenexe
...spark mechanical" to do these and had included the source files for the model, those file with extension ".rsdoc".
grabcad
free
Worm gear motor
...worm gear motor
grabcad
worm gear motor with brake (ssypfb) and without (ssepf) 0.75kw i = 40 ... 60 mitsubishielectric
thingiverse
free
Fastmike Heng Long Worm Gear Drive by fastmike75
...e, dec 2017: added a new mount plate and bearing button for the leopard 2a6 tank base # 3889 to be uses with the long axle setup.
thingiverse
free
Industrial Worm Gearbox / Gear Reducer (Cutaway version) by LarsRb
...n parts in the fourth picture. when you want the gearbox to be non-cutaway, you have to print the 2 files named with non-cutaway.
thingiverse
free
Nerf Rapidstrike 180 Motor Cover (interchangeable design) by tungstenexe
...spark mechanical" to do these and had included the source files for the model, those file with extension ".rsdoc".
thingiverse
free
Inmoov Gear Motor by peter_heim
...oller schmatic soon
more details can be found on my bloghttp://escaliente-robotics.blogspot.com.au/
inmoovhttp://www.inmoov.fr/
grabcad
free
Gamepad Controller
...ad controller
grabcad
major components:
1. pcb
2. controller top
3. controller bottom
4. joystick
5. screw
follow for more !!!!
Kuryaka
thingiverse
free
Mag to Rival Pusher Adapter by kuryaka
...ounds.
requires two bolts and an extension spring for assembly.
work in progress - more complete documentation in a week or so.
thingiverse
free
RS Pistol Picatinny Rail + Covers by kuryaka
... down. i recommend printing without support, but you can also print right-side-up with support if you prefer for it to look good.
thingiverse
free
Caliburn Solid Stock by kuryaka
...files are untested as my printer is temporarily out of commission and the prints are funky to start with. print at your own risk.
thingiverse
free
Nerf Mk-11.1: Durendal Alternate Handle by kuryaka
... durendal.
replaces the d-grip components.
mk-11 guide + filelist here: http://nerfhaven.com/forums/topic/27889-mk-11-durendal/
thingiverse
free
Worker Mag Bumper Plate by kuryaka
...ee fit, or design to print with no support.
update 06 feb 2018: lengthened the body a tiny bit to fully cover the magazine base.
thingiverse
free
Rapidstrike Pistol Battery Door by kuryaka
...8mm it should fit a turnigy graphene 3s 1000mah battery.
additional hardware needed:
m3 x 12mm thumb screw (1x)
m3 hex nut (2x)
thingiverse
free
Proto Flywheel by kuryaka
....5mm with a 42.5mm cage), but compresses the dart at a more ideal pressure angle.
9.5 also takes a 41mm cage but has 9.5mm hole.
thingiverse
free
Nerf Vector - Pulsar Mods by kuryaka
...age screw holes to get the screw heads out of the way of the wheels. not sure if this will cause issues in the rest of the build.
thingiverse
free
Rapidstrike Pistol Stock by kuryaka
...ith stock hasbro components, labeling as v2
22 dec 2017: made dimensions slightly larger to reduce wobble.
14 dec 2017: created.
Pusher
turbosquid
$45
Boat PUSHER
...y free 3d model boat pusher for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1235398)
turbosquid
free
Simple Explosive Pusher
...xplosive pusher for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1220272)
turbosquid
$12
Manicure pusher Zinger PBR
...pusher zinger pbr for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1237471)
turbosquid
$8
Pusher Spray Transparent Bottle
...nsparent bottle for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1328171)
turbosquid
$5
Spray Pusher Cylinder Bottle
...cylinder bottle for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1328167)
3d_export
$20
Of Iranian kamikaze drone Shahed-136
...flying wing with a 4-cylinder piston engine and a pusher propeller. since the war has been going on in...
3d_export
$60
saab j21
...used a relatively unorthodox twin boom fuselage with a pusher engine, giving the aircraft an unusual appearance. work began...
cg_studio
$109
Icon A53d model
...amphibious light sport aircraft folding wings high-wing flying boat pusher propeller prototype rotax 100 realistic detailed .max .3ds .xsi...
3ddd
$1
Koket Flora
...brass intricately sculpted fixture makes for a hip petal pusher look. product features polished brass aged bronze, pewter. lamps...
thingiverse
free
Coffee Pusher
...coffee pusher
thingiverse
small coffe pusher that can be stored inside the coffe bin.
Nerf
turbosquid
$30
Nerf Soaker
...osquid
royalty free 3d model nerf soaker for download as obj on turbosquid: 3d models for games, architecture, videos. (1255038)
turbosquid
$9
Nerf Gun
...urbosquid
royalty free 3d model nerf gun for download as c4d on turbosquid: 3d models for games, architecture, videos. (1200860)
turbosquid
$1
Nerf Doubledown
... model nerf doubledown for download as jpg, 3ds, max, and fbx on turbosquid: 3d models for games, architecture, videos. (1477201)
turbosquid
$50
Nerf Clip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Nerf Dart
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Nerf Picatinny Rail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Nerf Gun Low Poly
...royalty free 3d model nerf gun low poly for download as blend on turbosquid: 3d models for games, architecture, videos. (1632641)
3d_export
$19
nerf n-strike elite rough cut - 3d scan
...nerf n-strike elite rough cut - 3d scan
3dexport
free3d
$15
Nerf Darts
...nerf darts
free3d
nerf darts for any nerf gun!
thingiverse
free
Pistola a dardi NERF (Nerf Gun) by ruggeromarzocca
...pistola a dardi nerf (nerf gun) by ruggeromarzocca
thingiverse
nerf gun, pistola nerf...
Automatic
archibase_planet
free
Automat
...automat
archibase planet
automat equipment
automat n190510 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$17
Automatic wire bending machine wire automatic bending machine
...atic wire bending machine wire automatic bending machine
3dexport
automatic wire bending machine, wire automatic bending machine
archive3d
free
Automat 3D Model
...ive3d
automat equipment
automat n190510 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$20
Design of automatic laminator
...design of automatic laminator
3dexport
design of automatic laminator
3d_export
$6
Automatic soldering machine
...automatic soldering machine
3dexport
automatic soldering machine
turbosquid
$20
automatic rifle
...id
royalty free 3d model automatic rifle for download as fbx on turbosquid: 3d models for games, architecture, videos. (1163137)
turbosquid
$9
automatic gun
...yalty free 3d model automatic gun for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1226948)
turbosquid
$5
Automatic Knife
...lty free 3d model automatic knife for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1378253)
turbosquid
$15
Automatic Stamp
...d model automatic stamp for download as ma, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1569569)
turbosquid
$1
flashlight for automat
...flashlight for automat for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1314717)