Thingiverse
Neopixel progress bar CURA plugin for klipper by Baltojikale
by Thingiverse
Last crawled date: 2 years, 11 months ago
In original release of this plugin inserted gcode commands are in "R0-255" style.
Klipper doesnt understand them and requires neopixel commands in "RED=0-1.00" style.
Here is adjusted script for that.
Changes:
color code values from 255 into 1.00
some integers to floats
export format.
For installation and usage refer to original things:https://www.thingiverse.com/thing:4614904https://www.thingiverse.com/thing:4629462
Requirements:
Designated neopixel in Klipper's printer.cfg file should be called as : "Neo_stat_bar"
Generated inserted code example (violet color):
SET_LED LED=Neo_stat_bar INDEX=1 RED=1.00 GREEN=0.00 BLUE=1.00
SET_LED LED=Neo_stat_bar INDEX=2 RED=0.05 GREEN=0.00 BLUE=0.05
Set up in photos is installed on Voron V2.4 printer. There are 2x21 RGB neopixel strips wired in parallel. Strips get power directly from 5V psu (Mean well LRS-50-5) while signal by single line (which is split in to 2, to get parallel control) which comes from control board (BTT SKR 1.4T).
Same psu also pawers Raspberry PI 4 which requires up to 3A.
White led (24v) are powered directly from SKR 1.4T from hot end port/mosfet. Controlled separately from neopixels.
Also as bonus adding my take on adjustable led strip bar.
bar_x_2.stl model should be scaled in slicer length wise to accommodate one needs.
Designed for led strips insulated with rectangular silicone tube.
Hardware:
m3x8 mm bolts (din912 recommended)
m3 nuts (optional)
some type of m3 t-nuts
Models:
safety led clip is optional (safety measure for failure of double sided sticky tape)
in names there is multiplier how many copies of that part should be printed.
Printed in voron standarts: 4 perimeters, 5 tops and bottoms and 40 infill. ( for thin parts likethese it unintentionaly becomes 100%
Klipper doesnt understand them and requires neopixel commands in "RED=0-1.00" style.
Here is adjusted script for that.
Changes:
color code values from 255 into 1.00
some integers to floats
export format.
For installation and usage refer to original things:https://www.thingiverse.com/thing:4614904https://www.thingiverse.com/thing:4629462
Requirements:
Designated neopixel in Klipper's printer.cfg file should be called as : "Neo_stat_bar"
Generated inserted code example (violet color):
SET_LED LED=Neo_stat_bar INDEX=1 RED=1.00 GREEN=0.00 BLUE=1.00
SET_LED LED=Neo_stat_bar INDEX=2 RED=0.05 GREEN=0.00 BLUE=0.05
Set up in photos is installed on Voron V2.4 printer. There are 2x21 RGB neopixel strips wired in parallel. Strips get power directly from 5V psu (Mean well LRS-50-5) while signal by single line (which is split in to 2, to get parallel control) which comes from control board (BTT SKR 1.4T).
Same psu also pawers Raspberry PI 4 which requires up to 3A.
White led (24v) are powered directly from SKR 1.4T from hot end port/mosfet. Controlled separately from neopixels.
Also as bonus adding my take on adjustable led strip bar.
bar_x_2.stl model should be scaled in slicer length wise to accommodate one needs.
Designed for led strips insulated with rectangular silicone tube.
Hardware:
m3x8 mm bolts (din912 recommended)
m3 nuts (optional)
some type of m3 t-nuts
Models:
safety led clip is optional (safety measure for failure of double sided sticky tape)
in names there is multiplier how many copies of that part should be printed.
Printed in voron standarts: 4 perimeters, 5 tops and bottoms and 40 infill. ( for thin parts likethese it unintentionaly becomes 100%
Similar models
thingiverse
free
Valve Index Controller Wall Mount by thestevemarshall
...evemarshall
thingiverse
can be mounted to a back plate with #6 wood screws, or directly to your wall with medium command strips.
thingiverse
free
Artillery Genius Klipper config by Mudz
...btt skr 1.4 with tmc2209
tft screen don't work with klipper
**the led is not enabled but you can add the code to the firmware
thingiverse
free
Valve Index Base Mount Corner Bracket: Command Strip Version
... in place.
i filled in the holes for the wall screws and added recessed areas on the backside to place the command strip instead.
thingiverse
free
PGM to OpenSCAD surface (normed zero-one) by peetersm
...ot.com/docs#image_surface
also note in openscad the surface command adds 1mm to the bottom (below zero) of the surface it creates
3dwarehouse
free
Neopixel LED Strip 1m (60/m)
...neopixel led strip 1m (60/m)
3dwarehouse
a 1m strip of neopixel leds with a density of 60 leds per meter.
thingiverse
free
Klipper M600 code by woodwaker
...st any raspberry pi will run it.
this is customized for a btt skr mini e3 v2, but there are presets for almost any printer board.
thingiverse
free
Ryzen Logo by kyngston
...e
ryzen logo with space for a digispark controller and a strip of neopixelsfusion360
digispark attiny85
neopixel strip 144 led/m
thingiverse
free
LED strip mount for Geeetech A10M (Neopixel/5050) by RETROPUK
...ed strip mount for geeetech a10m (neopixel/5050) by retropuk
thingiverse
mount for 5050 led strip/neopixel for my geeetech a10m.
grabcad
free
WS2812B RGB LED (Adafruit Neopixel)
... format. i'll upload files for 60 led/meter strips and 144 led/meter strips shortly.
updated with dimensions from datasheet.
thingiverse
free
Cura plugin - NeoPixel Progress bar by Kotvic
... bigtreetech skr 1.3 and some other mainboards mounting holes, so you can mount leds with screws that are used to hold mainboard.
Baltojikale
thingiverse
free
3DP linear bearing (recirculating) and DIY linear rail 6mm bb by Baltojikale
...as reference only. too much wrong operations.
https://www.thingiverse.com/thing:4662854
https://www.thingiverse.com/thing:4671314
thingiverse
free
3DP linear bearing (recirculating) and DIY linear rail V2 (old version) by Baltojikale
...s as elephant foot.
current design could be aplicable in 3d printers.
also working on 6 mm bb version. posible cnc aplications.
thingiverse
free
3DP linear bearing (recirculating) and DIY linear rail (old version) by Baltojikale
...ounting mechanism thus one cannot over tighten mounting screw as they can possible deform part and interfere with bb circulation.
thingiverse
free
SILVIUS extruder: Belted 1:5 BMG dual gear by Baltojikale
...iangle labs volcano hot end clone kit was not used as it was louder. thus designed that “monstrosity” which is present in photos.
thingiverse
free
3DP linear bearing (recirculating) and DIY linear rail 4.5mm bb (Final version) by Baltojikale
...e/ryh3psujley
further development
application in cnc project. currently working on test model of corexy laser cnc. still testing.
Klipper
thingiverse
free
Artillery Genius Klipper by DavidMega
...artillery genius klipper by davidmega
thingiverse
simple klipper config for the artillery genius.
works well for me.
thingiverse
free
Klipper Configs for Creality Printers by artheoday
...klipper configs for creality printers by artheoday
thingiverse
klipper config... i will upload more in the future
thingiverse
free
RotoRev Klipper LED Board Mount by 3dcrash
...rotorev klipper led board mount by 3dcrash
thingiverse
read led board mount for the rotorev klipper 220mm.
thingiverse
free
Klipper Calibrate Ring
...fically to be a klipper printer.
this uses less filament and takes less time when you do a large 150% ring for doing fine tuning.
thingiverse
free
Artillery Genius Klipper config by Mudz
...btt skr 1.4 with tmc2209
tft screen don't work with klipper
**the led is not enabled but you can add the code to the firmware
thingiverse
free
Klipper M600 code by woodwaker
...st any raspberry pi will run it.
this is customized for a btt skr mini e3 v2, but there are presets for almost any printer board.
thingiverse
free
Kingroon KP3S Klipper 0.96 oled screen by nehiLo
...//
printer.cfg
[mcu host]
serial: /tmp/klipper_host_mcu
[display]
lcd_type: ssd1306
menu_timeout: 30
i2c_mcu: host
i2c_bus: i2c.1
thingiverse
free
Klipper Cult Faceplate for Artillery Printers by pseudo6626
...ns of the faceplate, so that it should now match the stock tft on the sidewinder x1. disclaimer, i have not printed to check yet.
thingiverse
free
Klipper Firmware Calibration Model by ChickinTenders
...per max acceleration value.
your values may differ, hope this helps!
rotate the the stl so the shelled out portion is facing up.
thingiverse
free
CR10 V2 Klipper config with 3D Touch and AC Bed by XT350TTX
...hat linear / pressure advance is not possible for stock cr10v2 creality mainboard with klipper. (tmc2208 in stealthchop)
have fun
Neopixel
thingiverse
free
NeoPixel Mount
...neopixel mount
thingiverse
geeetech a10m neopixel mount
thingiverse
free
neopixel clock by arradan
...neopixel clock by arradan
thingiverse
this is frame for neopixel clock with 60 led neopixel ring.
thingiverse
free
neopixel cover
...neopixel cover
thingiverse
a basic cover made for neopixel's using clear pla filament
thingiverse
free
Neopixel Cover
...neopixel cover
thingiverse
neopixel cover i made for a knight rider light bar build made in freecad.
thingiverse
free
Joseph Neopixel by ShimmyJ
...joseph neopixel by shimmyj
thingiverse
neopixel shifts colors
thingiverse
free
3DX Neopixel Project
...3dx neopixel project
thingiverse
a design for a neopixel based off of arduino.
thingiverse
free
Neopixel Triplet by reed
...neopixel triplet by reed
thingiverse
holds three single pieces of a neopixel ribbon.
thingiverse
free
3dx neopixel by 21smithe
...3dx neopixel by 21smithe
thingiverse
print, then glue neopixels to the print. plug in the code and go
thingiverse
free
NeoPixel Star by fvan84
...neopixel star by fvan84
thingiverse
a star shape piece to fit 5 neopixel sticks
thingiverse
free
Funny Neopixel glasses
...funny neopixel glasses
thingiverse
tested with arduino uno and adafruit neopixel library :-) d=50mm
Cura
3d_ocean
$25
Campana de Dolores (Dolores´s Bell) - Mexico
...obj [ eng ] historical bell used by the cura hidalgo on the mexico´s independence event (16 sep 1810)....
3d_export
$5
muscle low poly car
...poly i hope you like it!<br>3d rar includes stl ,cura file and gcode...
3d_export
$5
playboy keychain rectangle
...keychain rectangle 3dexport playboy keychain rectangle<br>my print settings in curalt;br>pla<br>nozzle 205<br>bed 60<br>walls 3<br>infill...
3d_export
$5
deer christmas 3
...use a good 3d printing software such as “ultimaker cura with the option; “remove all holes” activated or another...
3d_export
$5
deer christmas 2
...use a good 3d printing software such as “ultimaker cura with the option; “remove all holes” activated or another...
3d_export
$5
deer christmas
...use a good 3d printing software such as “ultimaker cura with the option; “remove all holes” activated or another...
3d_export
$5
deer christmas 5
...use a good 3d printing software such as “ultimaker cura with the option; “remove all holes” activated or another...
3d_export
$5
papa noel - santa claus
...use a good 3d printing software such as “ultimaker cura with the option; “remove all holes” activated or another...
3d_export
$5
hippopotamus planter pot
...use a good 3d printing software such as “ultimaker cura with the option; “remove all holes” activated or another...
3d_export
$5
decoration planter pot cute girl 15
...use a good 3d printing software such as “ultimaker cura with the option; “remove all holes” activated or another...
Progress
3ddd
free
Baga / Progress
...baga / progress
3ddd
baga
progress baga
3ddd
$1
Futura / Progress
...futura / progress
3ddd
futura
фабрика futura модель progress
3ddd
$1
светильник Progress Lighting
...9):
d -50,8 см.
светильник progress lighting (art.p4642-09):
d -62 см.
светильник progress lighting (art.p4643-09):
d -68,6 см.
turbosquid
$5
spaceship progress
...
royalty free 3d model spaceship progress for download as max on turbosquid: 3d models for games, architecture, videos. (1589494)
turbosquid
$5
Progressive Knife
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Progressive Arts building
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Baga Progress - 3291
...baga progress - 3291
3ddd
baga
baga art.3291
3ddd
$1
Progress Lighting P5184-104 1
...progress lighting p5184-104 1
3ddd
progress lighting
kitchen lighting
bar lighting
3ddd
free
Baga Progress 3434
...a garganti
art. 3434
4 lights floor lamp
finish: leaden and nickel
lampshades: black leather
cm l. 135 - h. 207
d: 50
4x40w e14
turbosquid
$50
Progressive Sheet Metal Mold
...ree 3d model progressive sheet metal mold for download as ige on turbosquid: 3d models for games, architecture, videos. (1439355)
Plugin
turbosquid
$6
Switches & Plugins collection
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Parquet Floor 29 WITHOUT PLUGINS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Parquet Floor 27 WITHOUT PLUGINS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$3
Water Shader (No Plugins) 3ds Max
... 3ds max
3docean
photo realistic 3ds max water shader requiring no 3rd party plug-ins or renderers. contains preview scene file.
3d_export
$5
Contemporary Brushed Nickel Finish Plugin Sconce 3D Model
...ntemporary brushed nickel finish plug-in sconce
contemporary brushed nickel finish plugin sconce 3d model render74 52146 3dexport
3d_export
$59
Rayfire plugins fragmention wall on car 3D Model
...eck break down wreak havoc blow up burst detonate
rayfire plugins fragmention wall on car 3d model rahman.najafian 87890 3dexport
3d_export
$5
four swords lightsaber battered lightsaber steel sword battered steel sword with plugins
...d steel sword with plugins
3dexport
four swords, lightsaber, battered lightsaber, steel sword, battered steel sword with plugins
3d_export
$99
3D Model Toyota Prius PHV 2012 Plugin Purius 3D Model
...12 2013 gs max 3ds fbx obj dxf sport coupe phv plug-in
3d model toyota prius phv 2012 plugin purius 3d model poal7 51644 3dexport
turbosquid
$899
Rotors II - 7 Pre-Rigged Helicopters for Craft Director Studio and 1 Premium Plugin
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Иисус
...3ddd статуэтка для правильного отображения текстуры установите бесплатные плагины siger:http://www.sigerstudio.eu/shop/plugin-free/sigertexmap-complexfresnel/ http://www.sigerstudio.eu/shop/plugins-free/sigertexmaps-sigernoise/ http://www.sigerstudio.eu/shop/plugins-free/sigertexmaps-sigerscratches/ http://www.sigerstudio.eu/shop/plugins-free/sigertexmap-thinfilm/ ...
Bar
archibase_planet
free
Bar
...bar
archibase planet
bar bar rack
bar 2 - 3d model for interior 3d visualization.
archibase_planet
free
Bars
...bars
archibase planet
horizontal bar parallel bars
parallel bars - 3d model for interior 3d visualization.
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar