NCS P3-v Steel NORTH COUNTRY SPECIALTIES 12 inch 3d printer the NCS P3-v Steel by trentjw

Last crawled date: 3 years ago

NCS P3-v Steel with 12" work area This Frame must Be Purchased.
1, This comes with lots of Cut parts for customizing to personal taste Check out the drawing.
Free Version Here http://www.thingiverse.com/thing:687929
Can be setup with either V slot or traditional round rod Guides
handy for upgrade from smaller units
The correct mounting holes for the PSU 4mm mount four patterns
1, First pattern for Chinese s-360- 12
2, Second pattern Mean Well Power Supply RSP-500-12 (recommended for large beds).
3, Third pattern for Mean well Power Supply RSP-750-12
4, Fourth Pattern for Mean Well Power supply RSP-1000-12
X plates included for V slot configuration
1, Micron 3DP all metal dual extruder plate
2, Micron 3DP all metal single Extruder plate
X plate motor mount and idler plate included v slot configuration
Has Y-axis lead screw capabilities (extra parts required)
1, does have metal lead screw nut to bed mount (verify mating edge is square)
2, recommend printing the printed parts before the conversion
Two spool mounts included
Top has additional mounting points for different accessories
has Cordobesa influence
1, Y Motor mount is now slotted for belt tensioning and braced for single mount plate.
2, Includes Extruder hard parts and mounting of Dual extruders in base form.
Most other P3 steel accessories interchange except Y idler prints
Wide enough to accommodate dual extruders almost full 12" travel of work area
Available for purchase direct link http://www.ncspecialties.com/computers/customcomputers/3dprinter/
Can be converted to triple Color extrusion with this kit http://www.thingiverse.com/thing:963249
can be upgrade to Core XY style printer with this upgrade kit http://www.thingiverse.com/thing:1657842 using most existing hardware
Designed to accept precut 500mm Vslot
Link to mechanical parts this works with both Paid and Free Versions http://openbuildspartstore.com