NASA Lunar Sampling System

Last crawled date: 1 year, 12 months ago

***Newer, lighter and more efficient design for rock and soil samplers from the surface of the moon with 360 degree rotary film technology.***
Special System Design Features:
1- With a motor all stages of sampling and separation. Transfer to the main container.
2- In every 360 degrees rotary period, sampling of rock and dust from the surface of the moon to the desired depth can be done.
2- Can be installed on the robotic arm and rover.
3. An autosampler valve for evaporation of the sample, which is evacuated by placing the original container in an oat.
4. Due to the absence of moving axial parts in the filter layers, no rock or soil will be stuck in the system, and the system will be minimized.
5- Evacuation of inappropriate samples with rotary reverse is possible.
6. The dust and dust are filtered down to 1.5 mm and transferred to the container.
7- Samples of 10 to 20 mm of stone are removed and transferred to the temporary tank.
8. In the temporary storage tank, the sample unit is collected and, at the time of arrival, the time to the point of restarting the samples is evacuated to the container.
9 - total weight of the system with 1500 gr without sampler.
10 - Net sterilizer weight without equipment 500 g.
(This design has been upgraded and completed with the previous rotating design)
**
80/5000
To view the samples, the primary reservoir and temporary reservoir have been selected for the selection of transparent polymers.**