Thingiverse
Nanolongrange V2 GPS FPV drone with single 18650 by Unboxingexperience7
by Thingiverse
Last crawled date: 3 years, 1 month ago
Here is the improved version of my Nanolongrange FPV drone frame. Main advantages over V1 are
18650 and 21700 battery capable
lighter (<95g AUW)
GPS
Build:
The frame is based on the currently lightest available Whoop AIO board which need to be used due to its smaller form factor. The build is a bit more difficult as you need to solder! Moreover, the solder pads are quite small so you need a steady hand. The video shows all the building steps.
Parts used:
Happymodel DiamondF4 AIO
Flywoo Robo 1202.5 11500kv
Gemfan 3018 props
Beitian BN-180
Caddx Ant
Longrange RC System like Crossfire, Tracer, ELRS... I used ImmersionRC Ghost
3x 6mm and 10x 4mm M2 screws (I used Titanium to save around 1g over steel)
rubber bands
18650 and 21700 battery capable
lighter (<95g AUW)
GPS
Build:
The frame is based on the currently lightest available Whoop AIO board which need to be used due to its smaller form factor. The build is a bit more difficult as you need to solder! Moreover, the solder pads are quite small so you need a steady hand. The video shows all the building steps.
Parts used:
Happymodel DiamondF4 AIO
Flywoo Robo 1202.5 11500kv
Gemfan 3018 props
Beitian BN-180
Caddx Ant
Longrange RC System like Crossfire, Tracer, ELRS... I used ImmersionRC Ghost
3x 6mm and 10x 4mm M2 screws (I used Titanium to save around 1g over steel)
rubber bands
Similar models
thingiverse
free
GPS mount for FPV drone by uav2608
...ingiverse
gps mount for drone. it works with shark x9 frame but i also attached freecad file to customize to other drone frames.
thingiverse
free
Namelessrc tiny gps mount for NanolongrangeV2 by Unboxingexperience7
...ption (1.6g) for getting gps on your fpv drone. this mount fits my nanolongrange design https://www.thingiverse.com/thing:4818009
thingiverse
free
Beitian BN180 GPS on 18650 mount by Unboxingexperience7
...range drone.
beitian smallest mini dual glonass+gps bn-180 micro double gps antenna module uart ttl for cc3d f3 rc drone airplane
thingiverse
free
#NanoLongRange / Rekon 3 Insta360 Go mount by nuxnik
...ght video using a 3d printed #nanolongrange drone, gps module and insta360 go camera:
https://www.youtube.com/watch?v=w7uvuorph2e
grabcad
free
Mount Antena SMA GPS bn220 FPV drone rajawali frame
...mount antena sma gps bn220 fpv drone rajawali frame
grabcad
mount sma antena
gps bn220
fpv cinematic drone rajawali
thingiverse
free
Drone fpv - GPS mount - iFlight Cidora SL5 by MiniMoro
...drone fpv - gps mount - iflight cidora sl5 by minimoro
thingiverse
gps mount for frame iflight cidora sl5
grabcad
free
Micro racing fpv
...
grabcad
micro racing fpv drone
8520motor; sp racing f3 flight controller; 1s battery; 100mm frame;
aio camera ; 40mm propeller
grabcad
free
GPS holder for FPV frame
...an dual bn-220 gps holder for hskrc vo235 (fpv drone frame).
model on photo printed on ender 3 pro in petg with layers of 0,2 mm
thingiverse
free
Arm and motor protectors set for CrissCross FPV 8 mm thick arm FPV drone frames by crisscrossfpv
...fpv drone frame
obsidian wasp fpv drone frame.
important: you need 2 right and 2 left protector per each quadcopter frame.
enjoy!
thingiverse
free
GPS holder for HSKRC VO235 by Valhunter
...gps holder for hskrc vo235 by valhunter
thingiverse
beitian dual bn-220 gps holder for hskrc vo235 (fpv drone frame).
Unboxingexperience7
thingiverse
free
naked Gopro toothpick mount by Unboxingexperience7
...hpick mount by unboxingexperience7
thingiverse
fits a naked gopro and caddx ant lite. i m using it on a babytooth and tp3 frame.
thingiverse
free
Namelessrc tiny gps mount for NanolongrangeV2 by Unboxingexperience7
...ption (1.6g) for getting gps on your fpv drone. this mount fits my nanolongrange design https://www.thingiverse.com/thing:4818009
thingiverse
free
Beitian BN180 GPS on 18650 mount by Unboxingexperience7
...range drone.
beitian smallest mini dual glonass+gps bn-180 micro double gps antenna module uart ttl for cc3d f3 rc drone airplane
thingiverse
free
Umma85 FPV cam mount - fits Caddx Ant by Unboxingexperience7
...mount. first, it was always moving sideways. second, caddx ant didn't fit well. with this design i got rid of these problems.
thingiverse
free
XT60 2-6S to USB converter by Unboxingexperience7
...ctronics and a plug. simply put the module with the soldered xt60 female connector into the body and then cover it with the plug.
thingiverse
free
Light Gopro Hero 7 Mount for AIO boards by Unboxingexperience7
...332hr3z6
eachine nano vtx https://www.banggood.com/custlink/gkk3ufcvus
runcam nano 3 https://www.banggood.com/custlink/3vdmuvcd7l
Nanolongrange
thingiverse
free
NanoLongRange short motor screws by gak4u
...nanolongrange short motor screws by gak4u
thingiverse
thingiverse
free
The #NanoLongRange rounded by FinalMadness
...ingiverse
thanks to dave_c_fpvhttps://www.thingiverse.com/thing:4769576
i made a version with rounded edges to save some weight.
thingiverse
free
The #NanoLongRange - 20x20 Remix by 1filth1
...the #nanolongrange - 20x20 remix by 1filth1
thingiverse
20x20 fc, 20x20 vtx & 20mm camera (runcam micro swift)
thingiverse
free
#NanoLongRange spacers by Mard0
...part while nano cams are usually 14mm wide. these spacers can be printed out of a soft squishy material (tpu) to fill up the gap.
thingiverse
free
#NanoLongRange / Rekon 3 Insta360 Go mount by nuxnik
...ght video using a 3d printed #nanolongrange drone, gps module and insta360 go camera:
https://www.youtube.com/watch?v=w7uvuorph2e
thingiverse
free
NanoLongRange Weight Reduced by justmaykit
...upted on the underside around the two back mounting holes.
it still holds a screw just fine so i never bothered to fix it. sorry.
thingiverse
free
NanoLongRange - 20x20 mount by Mariospin
...o recreate it and make a 20x20 setup powered with standard lipo.
there is enough space to put vtx. the prop guards are optional.
thingiverse
free
NanoLongRange with thicker camera plate by Floxflux
...lates were 15mm, this one is 14mm so it fits caddx ant without bending the plates. also added a brace at the bottom of the camera
thingiverse
free
The #NanoLongRange by Dave_C_FPV
...thing pre-build check out my brand atrekonfpv.com or the explorer and hexplorer minilongrange quads that i developed with flywoo.
thingiverse
free
Hotdog 2S li-ion nanolongrange by ph2t
...ith the abs print for me. this thing can be printed in pla/petg/abs. i use 30% infill. brim is recommended especially if abs.
18650
3d_export
$10
battery 18650
...battery 18650
3dexport
battery 18650
turbosquid
$10
18650 Li-ion Battery
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
lithium ion 18650 battery
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
3d_export
$10
18650 lithium battery
...your software before making a purchase is highly recommend. -in case of problems with the 3d model, do not hesitate to contact me
3d_export
free
solar rechargeable single led flashing light
...light 3dexport unit was design for housing a single 18650 lithium-ion battery and mini solar panel 55mm x 41mm-...
3d_export
$12
Emoji 042 Loudly Crying With Tears
...spec/gloss textures<br>- blend (cycles): metal/roughnes textures<br>geometry:<br>- units: centimeters<br>- polygons: 18650lt;br>- vertex: 18822<br>- triangles: 2<br>- quads: 18648<br>- ngons: 0<br>- vertex...
thingiverse
free
18650
...18650
thingiverse
18650 power supply, vase mode
thingiverse
free
18650 CASE
...18650 case
thingiverse
18650 case!
thingiverse
free
18650 holder
...18650 holder
thingiverse
18650 holder
thingiverse
free
18650 dispenser
...18650 dispenser
thingiverse
18650 dispenser for 10 batteries.
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
Drone
3d_export
$12
Drones
...drones
3dexport
drones
3d_export
$5
drone
...drone
3dexport
drone
3d_export
$6
drone
...drone
3dexport
high poly model of dji phantom 4 (drone)
3d_export
$5
drone
...drone
3dexport
drone military flight, sizes are in mm, modeled in fision 360
3d_export
free
drone
...drone
3dexport
drone de uso tactico, creado en blender version 2.79
3d_export
$35
DRONE
...drone
3dexport
turkey drone alpagu kamikaze foldable wing 3ds max 2019,2020,2021,2022 vray 5.00 rendered
3d_ocean
$29
Drone
...drone camera drone electronics justtomas military parrot plane robot sci-fi spy toy vehicle
drone by justtomas .c4d r16 .obj .3ds
turbosquid
$6
Drone
...rone
turbosquid
royalty free 3d model drone for download as on turbosquid: 3d models for games, architecture, videos. (1347051)
turbosquid
free
Drone
...drone
turbosquid
free 3d model drone for download as blend on turbosquid: 3d models for games, architecture, videos. (1688993)
turbosquid
$69
Drone
...e
turbosquid
royalty free 3d model drone for download as max on turbosquid: 3d models for games, architecture, videos. (1232508)
Gps
3ddd
free
Подавитель GPS
...подавитель gps
3ddd
подавитель gps
3ddd
free
Подавитель GPS
...подавитель gps
3ddd
подавитель gps
3ddd
free
Cтол GP
...cтол gp
3ddd
обеденный , giorgio piotto
cтол gp
turbosquid
$5
GPS navigation
...e 3d model gps navigation for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1636695)
turbosquid
$4
GP-5
...lty free 3d model gp-5 for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1160699)
turbosquid
$60
TomTom GPS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
GPS/TV
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Battery GP 3D Model
...battery gp 3d model
3dexport
battery gp
battery gp 3d model wasiliy 40319 3dexport
3d_export
$5
gas mask gp-5
...gas mask gp-5
3dexport
gas mask gp-5
cg_studio
$36
Gps device3d model
...ice3d model
cgstudio
.3ds .c4d .dxf .obj - gps device 3d model, royalty free license available, instant download after purchase.
V2
3d_export
free
Lamp v2
...lamp v2
3dexport
lamp v2 with solar panel
3d_export
$5
hammerhead v2
...hammerhead v2
3dexport
razer hammerhead v2 headphones, modeled in cinema 4d, render in corona
3d_export
$5
manometer v2
...manometer v2
3dexport
3d_export
$5
potato v2
...potato v2
3dexport
turbosquid
$52
Lifebuoys v2
...squid
royalty free 3d model lifebuoys v2 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1560870)
turbosquid
$2
Mask v2
...turbosquid
royalty free 3d model mask v2 for download as stl on turbosquid: 3d models for games, architecture, videos. (1527741)
turbosquid
free
Flashlight V2
...d
free 3d model flashlight v2 for download as , obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1663559)
turbosquid
$29
Thanos v2
...
royalty free 3d model thanos v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1651077)
turbosquid
$29
Titan v2
...d
royalty free 3d model titan v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1540228)
turbosquid
$29
Frieza v2
...
royalty free 3d model frieza v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1701238)
Single
3d_export
$5
single sofa single chair
...single sofa single chair
3dexport
single sofa single chair 3d model
3d_export
$5
single sofa single chair
...single sofa single chair
3dexport
single sofa single chair 3d model
3d_export
$5
single fastener
...single fastener
3dexport
single fastener
3ddd
$1
Single FLOU
... sofa , трансформер
диван-трансформер single от итальянского производителя flou
3ddd
$1
bed single
...bed single
3ddd
постельное белье
bed single 190cm*90cm
3ddd
$1
Single Flou
...single flou
3ddd
качественная моделька дивана-трансформера single flou.
3d_ocean
$9
Single sofa
...le sofa
3docean
modern sofa single sofa sofa white sofa.comfortable sofa
single sofa,sofa,modern sofa,white sofa.comfortable sofa
3d_export
free
Single Knife
...single knife
3dexport
a single knife, presumably it was used as one of the throwing knives.
3d_export
free
couch - single
...couch - single
3dexport
low poly single couch with .psd file for personal customization
3d_ocean
$5
Single Sofa
...single sofa
3docean
single sofa made by fabric , wood frame & ss leg