Thingiverse
NANAX by jinx
by Thingiverse
Last crawled date: 3 years ago
bubblehead series
what can I say, with that mouth cap I imagine the cyber men meets pig.
printing wise has an .22 layers height with a wall thickness of 1.2 in cura , " about 3 perimeters in slicer " with only a 5% infill " may get away with no infill, not tried it yet".
fitting a little tight so hand file will be needed " be sure to have all parts before sanding/filing there be no gluing back on.
updates:
added a tilt bracket and plug the jx mini bracket just aint up to the job.
tilt & pan is the jx mini http://www.thingiverse.com/thing:1013303.
BEWARE: need to desolder the cans from which ever US "PING" you use.there's impressions in the inner wall for LDR" see the four holes", and four spaces for thumb tacks to be used with a picaxe "used touch sense. throw out the cans, their's enough room inside to hotglue a PIcam and laser in place.
the bubblehead series is meant to be bit of fun cad time for me so everything is in a state of evolving.
happing printing jinx
what can I say, with that mouth cap I imagine the cyber men meets pig.
printing wise has an .22 layers height with a wall thickness of 1.2 in cura , " about 3 perimeters in slicer " with only a 5% infill " may get away with no infill, not tried it yet".
fitting a little tight so hand file will be needed " be sure to have all parts before sanding/filing there be no gluing back on.
updates:
added a tilt bracket and plug the jx mini bracket just aint up to the job.
tilt & pan is the jx mini http://www.thingiverse.com/thing:1013303.
BEWARE: need to desolder the cans from which ever US "PING" you use.there's impressions in the inner wall for LDR" see the four holes", and four spaces for thumb tacks to be used with a picaxe "used touch sense. throw out the cans, their's enough room inside to hotglue a PIcam and laser in place.
the bubblehead series is meant to be bit of fun cad time for me so everything is in a state of evolving.
happing printing jinx
Similar models
thingiverse
free
mini J pan&tilt by jinx
...;tilt by jinx
thingiverse
mini version of my jx-23 http://www.thingiverse.com/thing:970142 , modelled for those 9g servo's.
thingiverse
free
JX23 pan &tilt by jinx
...ldhttps://www.youtube.com/watch?v=d7o3uir_pqs
i've done a short write up at http://letsmakerobots.com/content/jx-23-pan-tilt
thingiverse
free
DJI Mavic Mini drone light bracket by Joew1120
... clearance, so that it doesn't block the mini's cooling vents.
when printed using 10% infill, it weighs less than a gram.
thingiverse
free
berrytot by jinx
...sh fit but it may need a bit of sanding
i used the srf05 us,had to de solder the cans and add a little wire for the yes to fit
thingiverse
free
PS4 Camera bracket by idbvideo
...below. it should work on many other lg tvs too.
it prints ok on my duplicator
i printed it in pla with dual wall and 10% infill
thingiverse
free
AZSMZ LCD Bracket For Kossel Mini by stefi01
...ign of lcd can mount on to kossel mini using both extrusion's,
print one as is then mirror and print again for the other side
thingiverse
free
Geeetech GT2560 board 80mm fan bracket by presley4b
...sed standard 80mm computer fan and it's working fine.
it was mounted to the printer plastic wall with four 3mm x 20mm screws.
thingiverse
free
base pad for kossel mini 2020 by jinx
...giverse
not much about it printed with pte filament " soft pla". 15% infill, and bolted to the beams with two bolts.
thingiverse
free
Sturdy Shelf Bracket by NCHippy
...check that video out athttps://youtu.be/mztmpgqcnbk
you can tinker with the model athttps://www.tinkercad.com/things/5eihbz1o55q?
thingiverse
free
Ring Outdoor Camera Angle Mount by deeek777
... the angle bracket to those and then mount the camera bracket to the angle bracket. the bracket that is modeled has a 65° angle.
Jinx
3d_export
$10
Jinx
...jinx
3dexport
jinx.
turbosquid
$10
Jinx Genesis
...squid
royalty free 3d model jinx genesis for download as max on turbosquid: 3d models for games, architecture, videos. (1336521)
3d_export
$5
Jinx Blender
...jinx blender
3dexport
3d_export
$5
Jinx grenade
...jinx grenade
3dexport
3d_export
free
Jinx grenade
...jinx grenade
3dexport
turbosquid
$20
Jinx grenade STL
...d
royalty free 3d model jinx grenade stl for download as stl on turbosquid: 3d models for games, architecture, videos. (1610526)
3d_export
free
grenade jinx
...nd i tried so hard, i did it from the heart, i will be grateful to you if you rate this work in any form (comments, likes, tips).
3d_export
$15
Jinx granade
...nx granade
3dexport
the model is made using a normal map, has a neon glow, detailing verticals 3,859 faces 3,861 triangles 7,058
3d_export
$15
jinx arcane league of legends
...erial for rendering (you cans use any render engine ) -fbx file with texture for jinx + 4 all rigged except pistol -fbx for unity
3d_export
$5
bounty hunters house
...bounty hunters house 3dexport jinx from league of legends in...