My (little) Weather iot Box by b1g0n3

Last crawled date: 3 years, 1 month ago

This is my first iot autonomous weather station. This box is made for minimum sizing with a 240 mAh for 2 autonomous week.
If you want a more powerfull weather iot, you can also try this model :http://www.thingiverse.com/thing:2235055
Hardware setup:

ESP8266 ESP-12F


GY-68 BMP180 Digital Barometric Pressure Sensor Board Module


USB Lithium Battery Charger Module Board With Charging And Protection

3.7V 240mAh 30C LiPo Battery
Software setup:
To collect data for my Home Automation (Jeedom), I use Espeasy.
It allow to control you esp8266, and all module boards.
To allow 1 autonomous week, I send data to Jeedom every 20 minutes and activate the deepsleep process.
pinout:
3.3v output to VCC, EN (ch-pd), VIN (bmp180)
Gnd output to GND and GPIO15, GND (bmp180)
GPIO12 and GPIO13 to SCL and SDA (bmp180)
GPIO16 to RST (to allow deep sleep)
you can add a special external pinout to TX/RX to allow debug
Printing:
You can download all 5 parts or just esp_waether2_all.stl for all part.