Thingiverse
My Anet a8 to AM8 build (and beyond..) by probesport
by Thingiverse
Last crawled date: 3 years ago
This is the build log and links to my Anet A8 to AM8 build. I listed everything in the order that it was printed or purchased - roughly... I did not include all of the spares, filaments, hardware, connectors/electrical, or miscellaneous items that I bought along the way.
I purchased my Anet a8 on Feb. 3rd from Bommerts mostly stock with MOSFET upgrades, vertex print mat, a power supply cover/switch, and most of the protective paper on the frame (I list the last item because removing it was an annoyance to me).
[History / Status]Apr.10.2018 I am still printing with the Anet a8 and building the framework for the AM8.Apr.12.2018 Assembled the entire AM8 frame, remixed the hotend plate again to clean up a screw hole issue, I also included a blank one and one customized with my shop logo. Remixed E3D logo with the E3DV6 holder from the modular kit.Apr.15.2018 Completed the AM8 build, ran first test prints.Worked great immediately, no issues. I printed the silver test block without any configuration changes, the blue after some minor tweaking in Cura.
[Remixes]
I will include the remixed files I used in case anyone else builds a similar setup.
1) Modular backplate remixed with the cable chain mount.
2) Backplate remix, remixed again with my logo.
3) V6 mount remixed with E3D logo (don't use - the gears cover some of the holes. I need to clean up)
[Purchased Upgrades]
One piece heatbed support plate - https://www.ebay.com/itm/Y-Carriage-Anodized-Aluminum-Plate-Upgrade-for-Anet-A8-A6-3D-Printers/222899828737
Clone/HE3D Titan - https://www.amazon.com/gp/product/B079ZPDVZR
Clone/Wangdd22 e3D v6 - https://www.amazon.com/gp/product/B06XBXDJY3
Gen e3D Titan - https://www.amazon.com/gp/product/B01F5Z3TRA
Gen e3D v6 - https://www.amazon.com/gp/product/B00NAK9L6Q
2.0m of 2.0mm/4.0mm PTFE bowden tube - https://www.amazon.com/gp/product/B01CUPV9KC
Rion Tech blower 50x50x15 - https://www.amazon.com/gp/product/B078NJFM4Y
Sunhokey 7x7mm Cable chain - https://www.amazon.com/gp/product/B078GQ1HLG
Uxcell M3 knurled tumb nuts - https://www.amazon.com/gp/product/B01HSTVJZ0
Noctua a-Series fans 40mm (x3) - https://www.amazon.com/gp/product/B009NQLT0M
Ketotek AC Power meter - https://www.amazon.com/gp/product/B0734XT87V
DROK DC Power meter - https://www.amazon.com/gp/product/B017FSED9I
Newstyle 12v 30a Power supply - https://www.amazon.com/gp/product/B00MAC9MO6
Wingoneer T8 Anti-backlash spring - https://www.amazon.com/gp/product/B077XCC994
6mm GT2 Belt - https://www.amazon.com/gp/product/B01E91K4N8
MicroSD card extension - https://www.amazon.com/gp/product/B01D9J8KQE
Winsinn levelling spring/brass nut - https://www.amazon.com/gp/product/B0761TLRNY
Huahuiyuan Fused inlet power socket - https://www.amazon.com/gp/product/B074LFCC2H
BIQU MOSFETs - https://www.amazon.com/gp/product/B07478M473
Keep On Printing 8x8 build surface - https://www.amazon.com/gp/product/B072JSDHL2
MEIQI Auto levelling sensor - https://www.amazon.com/gp/product/B076LHGKHP
GT2 16 tooth pulleys - https://www.amazon.com/gp/product/B01MQH2Y4C
Igus Drylin bushings/bearings - https://www.amazon.com/gp/product/B076NWK2NK
[Printed Upgrades - Anet a8]
Power Supply cover - https://www.thingiverse.com/thing:2000523
Dual MOSFET mount - https://www.thingiverse.com/thing:2086107
MicroSD card extension mount - https://www.thingiverse.com/thing:2389960
Original upgraded fan duct - https://www.thingiverse.com/thing:1954001
Honeycomb display cover - https://www.thingiverse.com/thing:2701255
Final upgraded fan duct - https://www.thingiverse.com/thing:2555206
Pliers holder - https://www.thingiverse.com/thing:65788
Extruder fan swivel & switch for lighting - https://www.thingiverse.com/thing:2061767
X-Belt holder - https://www.thingiverse.com/thing:2799729
Mounts for 7x7 cable chain/towline - https://www.thingiverse.com/thing:2296364
Z-Rod anti-wobble - https://www.thingiverse.com/thing:2490411
z-Screw anti-wobble - https://www.thingiverse.com/thing:2192303
Anet a8 Power Panel case - https://www.thingiverse.com/thing:2289073
Mainboard case with door - https://www.thingiverse.com/thing:2218266
Y-Belt tensioner - https://www.thingiverse.com/thing:1959208
[Printed Upgrades - Extruder]
Modular v6 - https://www.thingiverse.com/thing:2193695Back plate remixed with the right side of the cable chain mount (included)Front holder / fan mount remixed with E3D logo (included)Front holder / fan mountv6 40mm fan mountDual 40mm front fansStock Anet level sensorBelt holder
Bowden Clips - https://www.thingiverse.com/thing:2554082
Titan Extruder mount - https://www.thingiverse.com/thing:2253855
E3D Logo - https://www.thingiverse.com/thing:964797
[Printed Upgrades - AM8]
AM8 Gantry alignment jig - https://www.thingiverse.com/thing:2464467
AM8 Guide Rod alignment jig - https://www.thingiverse.com/thing:2809956
MicroSD card extension housing - https://www.thingiverse.com/thing:2700422
20x40 Extrusion Endcap - https://www.thingiverse.com/thing:2397622
20mm Extrusion bumper - https://www.thingiverse.com/thing:2764155
20mm Extrusion Snap-in cable clip - https://www.thingiverse.com/thing:1561292
Bowden mount bracket - https://www.thingiverse.com/thing:2538154
Linear rail slot covers - https://www.thingiverse.com/thing:832077
LCD case with tensioner notch - https://www.thingiverse.com/thing:2495827
LCD trim bezel - https://www.thingiverse.com/thing:2840329
Extrusion wire guide - https://www.thingiverse.com/thing:187500
Dual Mosfet mount - https://www.thingiverse.com/thing:2799545
I purchased my Anet a8 on Feb. 3rd from Bommerts mostly stock with MOSFET upgrades, vertex print mat, a power supply cover/switch, and most of the protective paper on the frame (I list the last item because removing it was an annoyance to me).
[History / Status]Apr.10.2018 I am still printing with the Anet a8 and building the framework for the AM8.Apr.12.2018 Assembled the entire AM8 frame, remixed the hotend plate again to clean up a screw hole issue, I also included a blank one and one customized with my shop logo. Remixed E3D logo with the E3DV6 holder from the modular kit.Apr.15.2018 Completed the AM8 build, ran first test prints.Worked great immediately, no issues. I printed the silver test block without any configuration changes, the blue after some minor tweaking in Cura.
[Remixes]
I will include the remixed files I used in case anyone else builds a similar setup.
1) Modular backplate remixed with the cable chain mount.
2) Backplate remix, remixed again with my logo.
3) V6 mount remixed with E3D logo (don't use - the gears cover some of the holes. I need to clean up)
[Purchased Upgrades]
One piece heatbed support plate - https://www.ebay.com/itm/Y-Carriage-Anodized-Aluminum-Plate-Upgrade-for-Anet-A8-A6-3D-Printers/222899828737
Clone/HE3D Titan - https://www.amazon.com/gp/product/B079ZPDVZR
Clone/Wangdd22 e3D v6 - https://www.amazon.com/gp/product/B06XBXDJY3
Gen e3D Titan - https://www.amazon.com/gp/product/B01F5Z3TRA
Gen e3D v6 - https://www.amazon.com/gp/product/B00NAK9L6Q
2.0m of 2.0mm/4.0mm PTFE bowden tube - https://www.amazon.com/gp/product/B01CUPV9KC
Rion Tech blower 50x50x15 - https://www.amazon.com/gp/product/B078NJFM4Y
Sunhokey 7x7mm Cable chain - https://www.amazon.com/gp/product/B078GQ1HLG
Uxcell M3 knurled tumb nuts - https://www.amazon.com/gp/product/B01HSTVJZ0
Noctua a-Series fans 40mm (x3) - https://www.amazon.com/gp/product/B009NQLT0M
Ketotek AC Power meter - https://www.amazon.com/gp/product/B0734XT87V
DROK DC Power meter - https://www.amazon.com/gp/product/B017FSED9I
Newstyle 12v 30a Power supply - https://www.amazon.com/gp/product/B00MAC9MO6
Wingoneer T8 Anti-backlash spring - https://www.amazon.com/gp/product/B077XCC994
6mm GT2 Belt - https://www.amazon.com/gp/product/B01E91K4N8
MicroSD card extension - https://www.amazon.com/gp/product/B01D9J8KQE
Winsinn levelling spring/brass nut - https://www.amazon.com/gp/product/B0761TLRNY
Huahuiyuan Fused inlet power socket - https://www.amazon.com/gp/product/B074LFCC2H
BIQU MOSFETs - https://www.amazon.com/gp/product/B07478M473
Keep On Printing 8x8 build surface - https://www.amazon.com/gp/product/B072JSDHL2
MEIQI Auto levelling sensor - https://www.amazon.com/gp/product/B076LHGKHP
GT2 16 tooth pulleys - https://www.amazon.com/gp/product/B01MQH2Y4C
Igus Drylin bushings/bearings - https://www.amazon.com/gp/product/B076NWK2NK
[Printed Upgrades - Anet a8]
Power Supply cover - https://www.thingiverse.com/thing:2000523
Dual MOSFET mount - https://www.thingiverse.com/thing:2086107
MicroSD card extension mount - https://www.thingiverse.com/thing:2389960
Original upgraded fan duct - https://www.thingiverse.com/thing:1954001
Honeycomb display cover - https://www.thingiverse.com/thing:2701255
Final upgraded fan duct - https://www.thingiverse.com/thing:2555206
Pliers holder - https://www.thingiverse.com/thing:65788
Extruder fan swivel & switch for lighting - https://www.thingiverse.com/thing:2061767
X-Belt holder - https://www.thingiverse.com/thing:2799729
Mounts for 7x7 cable chain/towline - https://www.thingiverse.com/thing:2296364
Z-Rod anti-wobble - https://www.thingiverse.com/thing:2490411
z-Screw anti-wobble - https://www.thingiverse.com/thing:2192303
Anet a8 Power Panel case - https://www.thingiverse.com/thing:2289073
Mainboard case with door - https://www.thingiverse.com/thing:2218266
Y-Belt tensioner - https://www.thingiverse.com/thing:1959208
[Printed Upgrades - Extruder]
Modular v6 - https://www.thingiverse.com/thing:2193695Back plate remixed with the right side of the cable chain mount (included)Front holder / fan mount remixed with E3D logo (included)Front holder / fan mountv6 40mm fan mountDual 40mm front fansStock Anet level sensorBelt holder
Bowden Clips - https://www.thingiverse.com/thing:2554082
Titan Extruder mount - https://www.thingiverse.com/thing:2253855
E3D Logo - https://www.thingiverse.com/thing:964797
[Printed Upgrades - AM8]
AM8 Gantry alignment jig - https://www.thingiverse.com/thing:2464467
AM8 Guide Rod alignment jig - https://www.thingiverse.com/thing:2809956
MicroSD card extension housing - https://www.thingiverse.com/thing:2700422
20x40 Extrusion Endcap - https://www.thingiverse.com/thing:2397622
20mm Extrusion bumper - https://www.thingiverse.com/thing:2764155
20mm Extrusion Snap-in cable clip - https://www.thingiverse.com/thing:1561292
Bowden mount bracket - https://www.thingiverse.com/thing:2538154
Linear rail slot covers - https://www.thingiverse.com/thing:832077
LCD case with tensioner notch - https://www.thingiverse.com/thing:2495827
LCD trim bezel - https://www.thingiverse.com/thing:2840329
Extrusion wire guide - https://www.thingiverse.com/thing:187500
Dual Mosfet mount - https://www.thingiverse.com/thing:2799545
Similar models
thingiverse
free
Ric's AM8 build by rkolibar
...tal frame for anet a8 https://www.thingiverse.com/thing:2263216
am8 cable anchor https://www.thingiverse.com/thing:2735765
thingiverse
free
X Belt Holder for Pheneeny Anet A8 E3D V6 Direct Mount by TheCrut
...t holder:https://www.thingiverse.com/thing:1433295
my remix of this holder for stock a8:https://www.thingiverse.com/thing:2744056
thingiverse
free
AM8 Electronics holder with MOSFET and Raspberry Pi mounts by VincentHall
...all
thingiverse
a remix of https://www.thingiverse.com/thing:4047923, but allowing the use of the standard anet a8 motherboard.
thingiverse
free
Anet A8 - E3D V6 Clone Mount by NeoCortex
...mount to use with the anet a8.
it supports this fan duct: https://www.thingiverse.com/thing:1620630
and a ljc18a3-h-z/bx sensor.
thingiverse
free
Anet AM8 Conversion Parts by M1dn1ghtN1nj4
...remix) (neo1664)https://www.thingiverse.com/thing:3329528
am8 x axis holders (thorinair)https://www.thingiverse.com/thing:2745187
thingiverse
free
Anet A8 E3D v6 E3Dv6 Holder with 40mm Fan, Probe, and Y Filament Joiner Mount by juro157
...w.thingiverse.com/thing:3058253
it is an e3dv6 hotend holder with
40 mm fan mount,
12 mm z probe holder,
y filament joiner holder
thingiverse
free
Bigtreetech skr 1.3 Mount for Anet AM8 Upgrade by Mytrayl
...kr 1.3 with mosfets
and a minimalistic mount for an 120mm fan
and a bunch of little upgrades for the am8 upgrade for the anet a8
thingiverse
free
AM8 CAD Model (MKS GEN + E3D V6) by Keepars
...grabcad) if you want these files i suggest you check out the sources i liked above and credit the original designers/engineers ;)
thingiverse
free
Anet A8 Titan Mount plus probe by SoBaldrick
...unt. see v2
this is the fan mount
https://www.thingiverse.com/thing:2344098
fan duct is
https://www.thingiverse.com/thing:1680165
thingiverse
free
Semi-Circular Anet A8 Fan Duct - Small by ArkDuque
...is a e3d v6 clone, it is smaller than the original one, so the lokster semi-circular fan duct hit the table with this x carriage.
Probesport
thingiverse
free
SSS_CardHolder by probesport
...obesport
thingiverse
i remixed this from my sss logo (rough) and the business card holder blank by elitecow.
nobody needs this.
thingiverse
free
VW Hitch Cover by probesport
...vw hitch cover by probesport
thingiverse
just a simple remix of a blank hitch cover and a vw logo
thingiverse
free
SSS Logo (rough) by probesport
...sss logo (rough) by probesport
thingiverse
this is just a quick render of my schafer speed shop logo. nobody needs this.
thingiverse
free
Yarn bobbin with stitch marker by probesport
...ker for crochet by belitcha into the design. a simple but effective remix.
big thanks to belitcha and kellbot for the tough work.
thingiverse
free
AM8 Voltmeter housing 2040/2020 by probesport
... extrusion channel.
you will need mounting hardware. if you print one let me know - this is my first created from scratch object.
thingiverse
free
Yarn bobbin with stitch marker by PhullofPheomelanin
...inspired by the yarn bobbin with stitch marker by probesport i used the same yarn bobbin model by kellbot...
Am8
evermotion
$12
armchair 055 am8
...f armchair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$12
armchair 051 am8
...f armchair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 012 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 011 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 017 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
desk 079 am8
...el of desk with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 027 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 015 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 037 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 013 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
A8
turbosquid
$47
Car A8
...
turbosquid
royalty free 3d model car a8 for download as max on turbosquid: 3d models for games, architecture, videos. (1196060)
turbosquid
$50
Audi A8
...yalty free 3d model audi a8 for download as 3dm, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1580187)
turbosquid
$15
Audi A8
...lty free 3d model audi a8 for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1387519)
turbosquid
$500
Audi A8
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Audi A8 3D Model
...audi a8 3d model
3dexport
audi a8 cars car
audi a8 3d model ma 20351 3dexport
3d_export
$5
Audi A8 3D Model
...audi a8 3d model
3dexport
3d model of audi a8
audi a8 3d model badyaka 12136 3dexport
3d_ocean
$89
Audi A8 2010
...usiness car car class class f f german german luxury luxury s s s8 s8 sedan sedan vehicle vehicle
new audi a8 2010 detaled model.
turbosquid
$39
A8 2018
...a8 2018 for download as 3ds, obj, wrl, c4d, fbx, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1345349)
turbosquid
free
audi a8 l
...rbosquid
royalty free 3d model audi a8 l for download as obj on turbosquid: 3d models for games, architecture, videos. (1663016)
3d_ocean
$45
Audi A8 restyled
...our door vehicle was created in blender3d 2.62.realistic renderings were created with yafaray 0.1.2 realistic plugin.rendering...
Anet
thingiverse
free
Anet by derbodesign
...anet by derbodesign
thingiverse
logo anet
thingiverse
free
Anet e10 , Anet v1.0 by jonathan_943D
...anet e10 , anet v1.0 by jonathan_943d
thingiverse
soporte de ventilador de 80mm, para controladora anet v1.0
thingiverse
free
Anet A8 Anet AM8 Y belt holder
...anet a8 anet am8 y belt holder
thingiverse
anet a8 anet am8 y belt holder
thingiverse
free
Anet A8 Probe Bracket for anet sensor by chelrix
...anet a8 probe bracket for anet sensor by chelrix
thingiverse
anet a8 probe bracket for anet official sensor and marlin firmware
thingiverse
free
Anet logo by JUST3D_PRNTNG
...anet logo by just3d_prntng
thingiverse
anet logo
thingiverse
free
Fan nozzle for Anet A8 with original Anet levelsensor by peteruhlmann
...et levelsensor by peteruhlmann
thingiverse
here is an improved fan nozzle for the anet a8 with original level sensor from anet.
thingiverse
free
Anet Et4 Box
...anet et4 box
thingiverse
tool box for anet et4
thingiverse
free
Anet Logo by Superflex_Plastic_Fantastic
...anet logo by superflex_plastic_fantastic
thingiverse
anet logo to incorporate into designs.
thingiverse
free
Box for Anet ET4
...box for anet et4
thingiverse
this is a simple box for tool of anet et4
thingiverse
free
Anet V1.0 Board Kühlung (80mm Lüfter) / Anet A8 by MadCre8
...anet v1.0 board kühlung (80mm lüfter) / anet a8 by madcre8
thingiverse
anet v1.0 board kühlung (80mm lüfter) / anet a8
Build
archibase_planet
free
Building
...building high-rise building office building construction
building n050115 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
building
...building
3dexport
clasic building
3ddd
$1
building
...building
3ddd
здание
building
archibase_planet
free
Building
...lanet
building office office building construction
building n090914 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Building
...net
building tower construction high-rise building
building n100214 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;