MRM Santoku Parts by NorCAL3D

Last crawled date: 3 years, 1 month ago

Multi Rotor Mania Santoku Parts Repository - Here are all the official parts for the MRM Santoku. Originally designed as a Connex frame, it has found many other uses using Standard FPV gear. Parts to mount such gear is include below as well.
All parts are intended to be printed from TPU or similar flexible materials, Unless noted otherwise.
Some parts require multiples. Mirror and duplicate on the bed as necessary
MRM Santoku - Antenna Mount: 45 degree SMA antenna mount. Use either TBS flange or standard SMA extensions.
MRM Santoku - SMA Antenna Mount: SMA antenna mount with SMA positioned vertically. Standard SMA extentions.
MRM Santoku - Arm Protection: Arm guard/soft mount for motors. Mirror for opposite side in slicer.
MRM Santoku - Arm Protection Extended: Arm guard/soft mount for motors. Extended to help in launch and motor protection. Mirror for opposite side in slicer.
HS1177 Cam Plates: Camera Mount plated with holes positioned to mount a standard FPV Camera. Print in A rigid material such as ABS, PETG, or PLA.
MRM Santoku - VTX Mount Insert: Designed to allow a standard VTX to be mounted in place of the Connex System. Zip tie slots are positioned to hold the VTX.
5mm Antenna Tube Mount: Antenna Routing that securely holds and Antenna Tube. Route your Receiver antenna up through the small hole in the bottom. Mirror in slicer to print opposite side.
We print all parts at a 0.2mm layer height in TPU. Typically 25% infill works well on these small parts. 3 perimeters 4 top & bottom layers. Support as required