MRM Reaper v2 Parts by NorCAL3D

Last crawled date: 3 years ago

Multi Rotor Mania Reaper v2 Parts Repository - Here are all the official parts for the MRM Reaper v2.
All parts are intended to be printed from TPU or similar flexible materials
Some parts require multiples. Mirror and duplicate on the bed as necessary
MRM Reaper v2 - Micro Camera Canopy: Micro camera (Foxeer, Runcam, or Equivalent size) mount that offers a full priont protection and sleek lines.
MRM Reaper v2 - Micro Camera Mount: Simple mounts for Micro Cameras, Runcam Micro, Foxeer Micro or equivalent.
MRM Reaper v2 - SMA Antenna Mount: Standard or TBS style SMA Mount(also works to route a dipole through it)
MRM Reaper v2 - AXii Antenna Mount: AXII u.fl or MMCX mount
MRM Reaper v2 - 6mm Arm Protection: Arm pretected extended on front and side. Aids in Launch Preloading
MRM Reaper v2 - 6mm Arm Protection- Bland: Simple Arm protection without extensions.
MRM Reaper v2 - Soft Mounts: Soft mount option when arm protection is not desired.
MRM Reaper v2 - 20mm Stack Adapter - 2mm: Used to mount a 20x20 FC and ESC stack. Highly suggest PETG for this part! Thread the 2mm holes for the stack with a tap if using nylon hardware for the stack mounting. Make sure the frame bolts are flush with the top of the nutserts bevore installign the stack mount over the nutserts.
MRM Reaper v2 - 20mm Stack Adapter - 3mm: Used to mount a 20x20 FC and ESC stack. Highly suggest PETG for this part! Thread the 3mm holes for the stack with a tap for the nylon hardware for the stack mounting. Make sure the frame bolts are flush with the top of the nutserts bevore installing the stack mount over the nutserts.
5mm Antenna Tube Mount: Antenna Routing that securely holds and Antenna Tube. Route your Receiver antenna up through the small hole in the bottom. Mirror in slicer to print opposite side.
We print all parts at a 0.2mm layer height in TPU. Typically 25% infill works well on these small parts. 3 perimeters 4 top & bottom layers. Support as required