Thingiverse
MPSM V1 Fan Shroud Remix by Netfool
by Thingiverse
Last crawled date: 3 years ago
This is a minor remix of the Fan Shroud Replacement by nBurn and the Shroud Clip by Archisim.
Changes to the Shroud are:
Adding a horizontal stop on the heat sink side to ensure the shroud won't slide low enoungh to interfere with the print.
Modifying the clip ears to work better with Archism's shroud clips.
Strengthening the side walls at the top of the shroud. (I broke an early attempt removing stubborn supports).
The only change to the Shroud Clip is the addition of two holes to accommodate a small tie-wrap to secure the extruder and fan wires if you choose to free your bowden tube from the cable wrap spiral.
I printed mine from PETG. PLA isn't likely to survive this close to the extruder.
UPDATE: I added two new versions:
One has no scoop to cool the print. This works well for PETG and ABS. Not recommended for PLA.
The second is an experiment with a cut-out in the back of the scoop to accommodate a silicone glove around the heater block.
Changes to the Shroud are:
Adding a horizontal stop on the heat sink side to ensure the shroud won't slide low enoungh to interfere with the print.
Modifying the clip ears to work better with Archism's shroud clips.
Strengthening the side walls at the top of the shroud. (I broke an early attempt removing stubborn supports).
The only change to the Shroud Clip is the addition of two holes to accommodate a small tie-wrap to secure the extruder and fan wires if you choose to free your bowden tube from the cable wrap spiral.
I printed mine from PETG. PLA isn't likely to survive this close to the extruder.
UPDATE: I added two new versions:
One has no scoop to cool the print. This works well for PETG and ABS. Not recommended for PLA.
The second is an experiment with a cut-out in the back of the scoop to accommodate a silicone glove around the heater block.
Similar models
thingiverse
free
MPSM Fan Shroud with Clips by paeyn
...esign.
if you don't print supports for the fan circle it could turn out a little rough (check pictures), but it still works.
thingiverse
free
Folgertech Kossel 2020 Fan Shroud w optional PLA Fan duct by mcclarydesign
...ed on the heat sink to avoid heat creep up the extruder. for printing pla, i added an optional fan shroud to attach to the side.
thingiverse
free
MP Mini Select 3D ABS & Nylon Fan Shroud remix by nBurn
...o the clips on the original.
i recommend a higher temperature filament (abs, petg, etc) over regular pla for prints of this part.
thingiverse
free
ender fan silencer by 311kam
... thingaverse needs an update badly.
i printed it with the round part of the fan facing down with supports. its printed with pla.
thingiverse
free
40mm Adapter Fan side Remix (E3D V6 Fan Shroud) by VoidRider
...adapter fan side remix (e3d v6 fan shroud) by voidrider
thingiverse
i just changed from 30mm to 40mm works more more more better
thingiverse
free
ProFab Fan Shroud Side Clips by ProFab3D
... fit into the walls of the outer shroud and with the original tension springs fixes the shroud into place on the hotend assembly.
thingiverse
free
MK3 Fan Shroud for E3D Aero by d412k5t412
...d a remixed model that fits my extruder mount better.
print the mount with supports, but do not use supports for the fan shroud.
thingiverse
free
Fan Shroud for Tronxy X5S using 40mm Fan by Jacoza
...by jacoza thingiverse this is a remix of a similar fan cooling shroud, in the remix i cut the...
thingiverse
free
Prusa i3 MK2 - Extruder Fan Shroud (30mm) by B_Dubb42
...ly lower, this goes on the back or left side of the fan. there is a plastic piece on the extruder body that this clip goes below.
thingiverse
free
Trinus Extruder Cooling Fan Shroud by Rethys
...ulling of the connectors at the pcb end. i'm going to include wire management clips on the next version to avoid this issue.
Netfool
thingiverse
free
MPSM No Drill Side Panel Remix by Netfool
...verse
this is a minor remix of jctots no drill side panel for the mp select mini. this version includes a hole for a 50mm fan.
thingiverse
free
Simple Cable Brace for MPSM by Netfool
...both v1 and v2 mp select minis.
thanks to malakid (https://www.thingiverse.com/malakid/about) for the photo of the brace on a v2.
thingiverse
free
RaspberryPi Case by Netfool
...oo heated over a candle. you can also use a soldering iron or a 3d printing pen.
i also added a stand to hold the pi vertically.
thingiverse
free
WxImp - IOT Weather Station by Netfool
... version. there's a fatal flaw in the design. (see the blog link above for details). i'll post a revised version soon.
thingiverse
free
MPSM V1 "Clipless" fan shroud. by Netfool
...e horizontal plane near the botom is a shutter for blocking part cooling while printing petg. (pulled halfway out for the photo).
thingiverse
free
MPSM (V1) Experimental Modular Fan Shroud by Netfool
...u're using an oem heater block.
stay tuned for future changes (or testing results that indicate this may be a terrible idea).
Mpsm
thingiverse
free
MPSM Mosquito 2GT
... mosquito 2gt
thingiverse
my adaptation of the mosquito to the mpsm.
printed in petg
1/12/20 added 4010 blower mounting and duct
thingiverse
free
MPSM E3D mount by tekhertz
...mpsm e3d mount by tekhertz
thingiverse
just another e3d mount, fits into original carriage on mpsm v1
thingiverse
free
Best MPSM Post Caitlin by Dr_Joel
...best mpsm post caitlin by dr_joel
thingiverse
for most charming post on the facebook mpsm group.
thingiverse
free
Santa and Sleigh Spinner for MPSM by itsonlym3
...santa and sleigh spinner for mpsm by itsonlym3
thingiverse
topper/spinner for the mpsm and just in time for christmas. ;-)
thingiverse
free
MPSM Vent and single fan by Quadfather818
...and single fan by quadfather818
thingiverse
moved fan from back of mpsm-v2 for heat bed rewire and added to passive cooling vent
thingiverse
free
Cube Spinner MPSM by oxamo
...cube spinner mpsm by oxamo
thingiverse
a spinner for the extruder wheel.
thingiverse
free
MPSM Bowden Clip by Rico_3D
...mpsm bowden clip by rico_3d
thingiverse
for hot end and extruder
thingiverse
free
MPSM Bed Rewiring Parts
...mpsm bed rewiring parts
thingiverse
3d printer parts.
thingiverse
free
Gyro Spinner For MPSM by itsonlym3
...gyro spinner for mpsm by itsonlym3
thingiverse
topper/spinner for your extruder.https://youtu.be/swbjup3tcym
thingiverse
free
MPSM Blower - no part duct by jbkuma
...sm that fits stock carriage. no part cooler. i use a separate $9 clip fan for part cooling that is dead silent and works great.
Shroud
thingiverse
free
shroud by samshay317
...shroud by samshay317
thingiverse
shroud
thingiverse
free
Fan Shroud
...fan shroud
thingiverse
this is a fan shroud for a 140mm fan
thingiverse
free
40mm fan shroud
...40mm fan shroud
thingiverse
40mm fan shroud
thingiverse
free
40mm fan shroud
...40mm fan shroud
thingiverse
40mm fan shroud
thingiverse
free
40mm fan shroud
...40mm fan shroud
thingiverse
40mm fan shroud
thingiverse
free
40mm fan shroud
...40mm fan shroud
thingiverse
40mm fan shroud
thingiverse
free
40mm fan shroud
...40mm fan shroud
thingiverse
40mm fan shroud
thingiverse
free
40mm fan shroud
...40mm fan shroud
thingiverse
40mm fan shroud
thingiverse
free
Fan Shroud by Allyctric
...fan shroud by allyctric
thingiverse
a shroud for a pc fan.
thingiverse
free
Magicfly Shroud by Eli_Funt
...e rain. the screws that came with the product were what i used to mount the doorbell to the shroud, and then to the house siding.
V1
thingiverse
free
Pinquin v1 by bjarkemape
...pinquin v1 by bjarkemape
thingiverse
pinquin v1
thingiverse
free
Minion v1 by bjarkemape
...minion v1 by bjarkemape
thingiverse
minion v1
thingiverse
free
Arrowhead V1 by ogill117
...arrowhead v1 by ogill117
thingiverse
arrowhead v1
thingiverse
free
Duct Vortex V1
...duct vortex v1
thingiverse
duct vortex v1
thingiverse
free
ParaBracci Bolt V1
...parabracci bolt v1
thingiverse
parabracci bolt v1
thingiverse
free
ParaMotori Bolt V1
...paramotori bolt v1
thingiverse
paramotori bolt v1
thingiverse
free
ParaBracci ThunderStorm V1
...parabracci thunderstorm v1
thingiverse
parabracci thunderstorm v1
thingiverse
free
ParaBracci Bit V1
...parabracci bit v1
thingiverse
parabracci bit v1
thingiverse
free
ParaMotori ThunderStorm V1
...paramotori thunderstorm v1
thingiverse
paramotori thunderstorm v1
thingiverse
free
ParaMotori Bullet V1
...paramotori bullet v1
thingiverse
paramotori bullet v1
Fan
thingiverse
free
Fan Duct 60mm fan
...fan duct 60mm fan
thingiverse
this a 60mm fan adaptor
thingiverse
free
Fan Stand 140mm Fan by Aron84
...fan stand 140mm fan by aron84
thingiverse
fan stand for 140x140x27mm fan
thingiverse
free
Fan wall for 40mm fan by Nule
...fan wall for 40mm fan by nule
thingiverse
fan aislator for 40mm fan with meshmixer support
thingiverse
free
Fan holder 40mm fan for V67
...n for v67
thingiverse
fan holder 40mm fan for v67
fan: https://www.amazon.de/dp/b07vhmv4dz/ref=cm_sw_r_other_apa_i_803cebwt8kvpe
thingiverse
free
Fan cover & fan grill to suit 50mm fan by Phil_Maddox
...fan cover & fan grill to suit 50mm fan by phil_maddox
thingiverse
simple fan cover for 50 x 50 x 10 fan
thingiverse
free
Fan grille for 50mm fan andE3D V6 Fan Duct for 50mm Fan V2 by vitaly12
...for 50mm fan ande3d v6 fan duct for 50mm fan v2https://www.thingiverse.com/thing:4662850
height:3.5mm
40mm fan grille coming soon
thingiverse
free
Fan Grid for 127mm Fan by MasterFX
...fan grid for 127mm fan by masterfx
thingiverse
just a simple fan grid for unusual 127mm fan
thingiverse
free
Fan Showdown fan submission by DAraymond
...fan showdown fan submission by daraymond
thingiverse
this is a fan i submitted for the youtube fan showdown series.
thingiverse
free
Fan Shroud
...fan shroud
thingiverse
this is a fan shroud for a 140mm fan
thingiverse
free
Mosaic Fan on Fan by bwevans
...a fan mount for the second fan that's included in the mosaic kit but is lacking any hardware. really useful for printing pla!
Remix
thingiverse
free
Extruder Spinner Remix of Remix of Remix
...d
feel free to print or remix and don't forget to post it.
if you find it useful you can send tip or buy me a coffe. thanks.
thingiverse
free
Predator mask (remix of remix)
...predator mask (remix of remix)
thingiverse
just cool mask :)
thingiverse
free
REMIX by nbvgbbvv
...remix by nbvgbbvv
thingiverse
remix
thingiverse
free
remix by Alejandragr
...remix by alejandragr
thingiverse
remix
thingiverse
free
remixed by mkj
...remixed by mkj
thingiverse
this is remix comment
thingiverse
free
UK Remix of a Remix by ukcat
...for a big kentucky wildcats' fan birthday!
update 3/18/14: uploaded a version with the uk stuff, but no initials at bottom.
thingiverse
free
Remix Mystery
...remix mystery
thingiverse
this is for a class remix assignment.
thingiverse
free
Slight Remix of Tundra Remix by PyrOverkill
...pyroverkill
thingiverse
slight modification of the my remix of the bakflip handle. better resolution on the name plate and logo.
thingiverse
free
Arrowhead Remix
...arrowhead remix
thingiverse
remixing my og arrowhead
thingiverse
free
Remix Project
...remix project
thingiverse
this is my submission for the thingiverse remix project.