Thingiverse
Motorcycle handbrake by DavidDow
by Thingiverse
Last crawled date: 3 years ago
A hand brake for locking your front wheel while taking a ferry or something.
Slam her in gear, put this on, stripe her down and get a good nights sleep before your trip! :)
Also works with ISO grips.
You should know there is a risk with keeping preassure on your breakes for too long, rubber seals can be damaged.
For a healthy break calliper you should not be in the danger zone as long as you don't use it like over winter.
But be aware of this risk.
I will use it on the 2 day ferry over the baltic sea this summer, and are not at all worried. I'm just telling you so you won't leave it on for a week or something stupid :)
Please take a picture of the model on you bike, It's always a nice time too look at other motorcycles :)
Upload it on "I made one".
This project was made possible by www.protech.se
Slam her in gear, put this on, stripe her down and get a good nights sleep before your trip! :)
Also works with ISO grips.
You should know there is a risk with keeping preassure on your breakes for too long, rubber seals can be damaged.
For a healthy break calliper you should not be in the danger zone as long as you don't use it like over winter.
But be aware of this risk.
I will use it on the 2 day ferry over the baltic sea this summer, and are not at all worried. I'm just telling you so you won't leave it on for a week or something stupid :)
Please take a picture of the model on you bike, It's always a nice time too look at other motorcycles :)
Upload it on "I made one".
This project was made possible by www.protech.se
Similar models
thingiverse
free
Motorcycle Handlebar iPhone 6 & iPhone 7 Case for use w RAM Mount by TommyBBQ
... don't come blaming me! if you destroy your bike, i didn't recommend this! it works for me and i thought i would share.
thingiverse
free
Burley FLEX connector for the byke by Movil
...ng as the original that broke anyway after 2 years of use.
if you find this useful please make a small donation.ethereum accepted
thingiverse
free
Pentagon Vase by Roompje
...er. not too long ago i installed the z-unlimited for the ultimaker 2, to test it i needed something big to print, so i made this.
thingiverse
free
La Pavoni Pressurestat Adjustment tool (post millennium) by hell_engineer
...orks for this model. any feedback would be great!
it also probably do with a few 0.1% scaling up too if it feels a bit too tight,
thingiverse
free
Altoids Smalls Divider (3 bay) by DocRayStantz
...s-contaminate the other items... but i'll take the risk for the convenience. minty ibuprofen should be standard, anyhow. :)
thingiverse
free
small universal filament spool holder by MrMdR
...ipover). you can make them longer - and they work just fine:http://www.123dapp.com/123d_design/smal-filament-spool-holder/2400176
thingiverse
free
Pergo Wrist Squeezer (RA Relief) by Pergo
...rews i used are described on ebay as
"10/50/100pcs metric thread m3 304 stainless steel hex socket head screw bolt nut"
grabcad
free
"Fizzarolli" 1lb Combat Robot
...#39;t use this as reference for an actual design i'm too much of a noob you should not be taking reference from my designs :/
thingiverse
free
Ikea SYMFONISK Lamp Shade Adapter
...e picture i'm using a 6" harp. the lamp shade has an 8" top diameter, 8" height, and 10" bottom diameter.
thingiverse
free
Ford Focus 2.0 PCV valve retainer clip by AndrewGrizzWalters
...39;s not my fault. do your research and take this at your own risk. i printed mine from petg, 245/70 on masking tape. takes 5 min
Daviddow
thingiverse
free
Backscratcher by DavidDow
...backscratcher by daviddow
thingiverse
a backscratcher should hurt, this one will.
optimized for a fortus 400 mc
thingiverse
free
Ceiling Light by DavidDow
...ceiling light by daviddow
thingiverse
use scale option to scale it to what you need.
thingiverse
free
Canasta Board (No Support) by DavidDow
...canasta board (no support) by daviddow
thingiverse
orient it so it lays flat, as the picture.
thingiverse
free
Ceiling Light by DavidDow
...dow
thingiverse
i made a ceiling light :)
it requires a fair deal of support :(
this project was made possible by www.protech.se
thingiverse
free
Toilet paper holder (TALL) (NO SUPPORT) by DavidDow
...toilet paper holder (tall) (no support) by daviddow
thingiverse
a toilet paper holder thing.
because why not?
thingiverse
free
FÖRHYRD P-PLATS by DavidDow
...hyrd p-plats
börjar skylten bli gammal och solblekt?
får du böter på din egna plats?
fräsha upp med en ny skyld, så lapplisa ser!
thingiverse
free
Cable hide (No Support) (NEW!!) by DavidDow
...e thinner.
i've also made a small cable holder for charging cables and such.
this project was made possible by www.protech.se
thingiverse
free
Ice Scraper Flag (No Support) by DavidDow
...
and some other countries.
i might make a norwegian flag if some one wants it.
this project was made possible by www.protech.se
thingiverse
free
Carburator drainer by DavidDow
...structions for your 2k clear provider.
the ultem model worked like a charm.
this project was made possible by www.protech.se
Handbrake
3d_export
$12
E30 Cup Holder v2
...removable box.<br>the installation location is located next to the handbrake<br>printed abs layer...
3d_export
$10
e30 cup holder
...box. the installation location is located next to the handbrake the diameter of the cup is 68 mm. the...
3d_export
$19
Bambino bicycle
...i owned and used one myself in 1965-1966. the handbrake was dangerous; rolling down the hill and using the...
3d_export
$70
lancer evolution 9
...wheel 2 4 sliders for opening each door 3 handbrake down slider 4 sun shades 5 bardachek 6 dashboard...
3d_export
$129
ursus c-355 tractor
...front tank front tires front wheels gauges gear sticks handbrake head lights hydrolic hitch system pedals rear axle rear...
thingiverse
free
Honda Jazz handbrake button
...honda jazz handbrake button
thingiverse
i had a request for a new handbrake button for a honda jazz.
thingiverse
free
Handbrake Simracing by Javi91ac
...handbrake simracing by javi91ac
thingiverse
work in progress
thingiverse
free
Mitsubishi Colt handbrake button by Raptirius
...mitsubishi colt handbrake button by raptirius
thingiverse
mitsubishi colt z34 handbrake button.
thingiverse
free
G27/G25 Handbrake Mount by Roedkill
...g27/g25 handbrake mount by roedkill
thingiverse
simple handbrake mount for the g27/g25 shifter
thingiverse
free
Table Mount For Handbrake
...or an m12 spacer on the bottom side of the print.
this was printed in pla with 3-4 walls while laying on the side with 20% infill
Motorcycle
3d_export
$6
Motorcycle
...motorcycle
3dexport
motorcycle
3d_export
$5
motorcycle
...motorcycle
3dexport
this is sci fi motorcycle!
archibase_planet
free
Motorcycle
...motorcycle
archibase planet
motorcycle bike
motorcycle n111008 - 3d model (*.gsm+*.3ds) for interior 3d visualization
archibase_planet
free
Motorcycle
...motorcycle
archibase planet
motorcycle motor transport
motorcycle n180608 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Motorcycle
...le
archibase planet
motorcycle motorbike motor bicycle
motorcycle n290113 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_ocean
$40
Motorcycle
...ike bobber highpoly motorcycle
3d model of custom motorcycle (old school bobber). it is not direct replica of any specific model.
archibase_planet
free
Motorcycle
...hibase planet
motorcycle motorbike motor bicycle
motorcycle v-rod n291213 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Motorcycle
...t
motorcycle motorbike kawasaki motor bicycle
motorcycle kawasaki n291213 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Motorcycle
...orcycle motorbike honda motor bicycle
motorcycle honda silverwing n271014 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Motorcycle
...orcycle harley-davidson motorbike motor bicycle
motorcycle harley n291113 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.