Thingiverse
Motor Case for Mabuchi 775, Ryobi saw motor by fastmike75
by Thingiverse
Last crawled date: 3 years ago
If you are looking for a very high torque small electric motor, this is a very inexpensive setup. Turns out the Ryobi R10633, 18V, 5 1/2" trim saw has a Mabuchi RS-775WC-8514, you can pick the Ryobi saws up used on ebay for 20-25 dollars. These motors sell for 50-70 bucks new without the gear box. Use the gear box and motor case that comes with the saw with this 3D printed case. The Ryobi gear case has a very strong 9-42 tooth gears in it. The Ryobi output shaft is 10mm and will take a 3/4" OD flexible shaft coupler or 10mm ServoCity set screw hub. There is a nice big 10x26x5 6000Z ball bearing in the gear case output shaft you can use in the 3D printed case.
The Mabuchi RS-775 motor puts out 1561 g-cm of torque at 17040RPM at 18Volts. That is 5 times the torque of a RS540 motors 312 g-cm. The RS-775 motor will work on voltage from 6-20 volts. The Ryobi gear reduction cuts the RPM down to 3651 and ups the torque to 7285 g-cm. Gear it down from there and you have a motor that will run about anything. Here are the specs on the Mabuchi motor http://www.mabuchi-motor.co.jp/cgi-bin/catalog/e_catalog.cgi?CAT_ID=rs_775vcwc
In one of the pictures you can see the difference in the motors. That is a 370 motor on the right, a RS-540 Mabuchi and 550 Titan motor in the center and the RS775 on the left. The RS775 is huge!
Use 8x3/4" sheet metal screws to attach Ryobi case to the 3D printed case. There are two gear cases one to mount up from the bottom and one to mount up from the output shaft side. The bottom mount has a 2 1/2" x 5/8" bolt pattern on bottom.
Was going to use these gear boxes to run a large scale 1/6th Cat RC bulldozer I am making, but the Ryobi gears where to large to fit in the dozer. Used the motors but had to design my own gear box for the RS775. These motors are brutes, very powerful running them at 12V, 18V would be very interesting.
One drawback is this motor takes 18.7 amps to run it, you will need a pretty heavy duty 20-30 amp motor speed controller to control the motors speed in a robot or RC vehicle.
Please use caution around children. As with any gear drive or belt drive, (If you ever want to play the guitar) never ever, ever get your fingers close to the pinch point of gears (especially this one), belts or spinning saw blades. Make sure you hold on tight or mount the RS775 motor before starting it, this motor makes some serious torque. Have fun and be safe!
The Mabuchi RS-775 motor puts out 1561 g-cm of torque at 17040RPM at 18Volts. That is 5 times the torque of a RS540 motors 312 g-cm. The RS-775 motor will work on voltage from 6-20 volts. The Ryobi gear reduction cuts the RPM down to 3651 and ups the torque to 7285 g-cm. Gear it down from there and you have a motor that will run about anything. Here are the specs on the Mabuchi motor http://www.mabuchi-motor.co.jp/cgi-bin/catalog/e_catalog.cgi?CAT_ID=rs_775vcwc
In one of the pictures you can see the difference in the motors. That is a 370 motor on the right, a RS-540 Mabuchi and 550 Titan motor in the center and the RS775 on the left. The RS775 is huge!
Use 8x3/4" sheet metal screws to attach Ryobi case to the 3D printed case. There are two gear cases one to mount up from the bottom and one to mount up from the output shaft side. The bottom mount has a 2 1/2" x 5/8" bolt pattern on bottom.
Was going to use these gear boxes to run a large scale 1/6th Cat RC bulldozer I am making, but the Ryobi gears where to large to fit in the dozer. Used the motors but had to design my own gear box for the RS775. These motors are brutes, very powerful running them at 12V, 18V would be very interesting.
One drawback is this motor takes 18.7 amps to run it, you will need a pretty heavy duty 20-30 amp motor speed controller to control the motors speed in a robot or RC vehicle.
Please use caution around children. As with any gear drive or belt drive, (If you ever want to play the guitar) never ever, ever get your fingers close to the pinch point of gears (especially this one), belts or spinning saw blades. Make sure you hold on tight or mount the RS775 motor before starting it, this motor makes some serious torque. Have fun and be safe!
Similar models
thingiverse
free
RS 775 Motor Mount For CNC by X_P
... the motor from the bottom side.
rs 775 motor properly fits in this mount.
if you like it give me tip for my next project.
enjoy.
grabcad
free
Drill gearbox motor mount for Ryobi
...drill gearbox motor mount for ryobi
grabcad
mount for ryobi 18v cordless drill with servo attachment for gear switching
grabcad
free
DC Geared Motor, 258-8316, RS PRO
...applications, rs stock no.: 258-8316. shaft diameter 5mm. output speed 75 rpm. maximum output torque 20 ncm. supply voltage 24 v.
grabcad
free
Planetary Gear Motor rs 775
...planetary gear motor rs 775
grabcad
this is a solidworks model of planetary gear motor rs 775
grabcad
free
Gear Box
...box rotates at a slower rate than the input shaft, and this reduction in speed produces a mechanical advantage, increasing torque
grabcad
free
ZGA37RG Motor Mounts
...tor high torque electric micro speed reduction geared motor centric output shaft 37mm diameter gearbox. assembled with m3 screws.
grabcad
free
RS775 motor
...eed: 3000 rpm.
-torque: 5.29 n-cm.
-output power: 13.20w.
-rated current (ma): 2000
-shaft diameter: 2.3 mm.
-shaft length: 6 mm.
grabcad
free
Motor Controlled Gearbox
...g.cm.(0.24 n.m to 0.98n.m)
at this gear ratio and 70% efficiency this gearbox transmit enough torque to run this hydraulic valve.
grabcad
free
Speed Reduction Gear motor
...f 120:1 is a reliable and efficient solution for applications that require slow and precise movements with high levels of torque.
thingiverse
free
Pulley for small motor by kg4iae
...lts with nuts to attach it to the shaft.
you will need 2 m2 bolts to attach the motor to the mount.
you should not need supports.
Fastmike75
thingiverse
free
Universal Mini Servo Base by fastmike75
...t; wide and .925" tall. servo opening .910" with1.100" mounting screw centers. uses (4) #4 screws in base corners.
thingiverse
free
Slash 4x4 overtray fan vent by fastmike75
...n overtray to keep rocks out and give fans enough air. use with the slash 4x4 overtray air scoop for better cooling and air flow.
thingiverse
free
Dunlop Strap Lock Washer by fastmike75
...r the strap lock.
make with raft and support. drill out center to 3/8" if needed. the raised side goes under the button cap.
thingiverse
free
Assorted Bone Arm Lengths for Linear, Door opener. by fastmike75
...dding some others so you can have a good assortment to choose from. measurements on the bones are center of eye to center of eye.
thingiverse
free
Mini 26mm 1" Muffler Tube Clamp by fastmike75
... surface on 1" od pipe or tube.
i was very suprised at how strong this clamp is printed fully filled. 3d print with support.
thingiverse
free
Bumper for Radio Shack 276-150 Circuit Board by fastmike75
...in zip socket for the micro. wired everything up to use futaba servo connectors that plug into the board and wired to micro pins.
thingiverse
free
Linear, MG90S Micro servo by fastmike75
...uot;) thick. use small flat washer and 4x1/4 screw for rack to hold arm. if you need some assorted length arm bones, let me know.
thingiverse
free
Tank Front Cowl Lights by fastmike75
...p in holders i got from radio shack.
added some screw holes on bottom so you can break the clip off and screw these on something.
thingiverse
free
Pulley Backer for Bowflex Max Trainer by fastmike75
...ts for good hold, print 50% or over for strength.
here is a video of the installation:https://www.youtube.com/watch?v=ox5qbsafvk0
thingiverse
free
Slash 4x4 overtray side rails LCG by fastmike75
...is for the right side. it has a push button rocker switch to turn esc on and off with overtray on.
switch button is very handy!
Mabuchi
thingiverse
free
RC motor support (Johnson / Mabuchi) by rene76
...n / mabuchi) by rene76
thingiverse
rc motor support that fit johnson / mabuchi 540 motors.
you can use a m3 screw and/or tyraps.
thingiverse
free
SpurGear for Mabuchi C2162-60006
...00/hp800/hp900) or similar models.
shaft is for a 3.15mm motor, 3.1mm
12 teeth
module 0.8
pressure angle 20 degrees.
(milimetric)
thingiverse
free
Slot car motor pod - 2 piece Mabuchi motor by wayne69x
...esign allowing the motor and axle bushes to be securely fixed in place with small 2mm screws
its designed to take a mabuchi motor
thingiverse
free
Scalextric Johnson 111 to Mabuchi Motor Adaptor Slot Car by csmith
...sharp knife before installing into the car.
hopefully this helps someone else get their vintage scalextric car back on the track!
thingiverse
free
CHASIS X1 PANDA SCX RAID (MOTOR MABUCHI CORTO) by SLOTJUAN
...ot.it 27d
piñón 9d
motor mabuchi caja corta (scaleauto motor sc14)
guía, osc, msc, ninco, etc......
esperamos que lo disfrutéis.
thingiverse
free
Mabuchi 555 and Drill Motor Mounts to 20x40 V-Slot! by DIY3DTech
... want a behind the scene look at what we are working on be sure to follow us on instagram (https://www.instagram.com/diy3dtech/)!
thingiverse
free
mini_drill_casingcoverfixing by sakharchukrv
...mini_drill_casingcoverfixing by sakharchukrv thingiverse body for mini mabuchi c4557-60003 dc...
thingiverse
free
Nikko's Jet Gale 91 upgrade to a mabuchi 540 by javierru
...tps://youtu.be/nn-yduak7o0
with my designed one:https://youtu.be/jxuaev8fvys
here you can see the disadvantages described before.
thingiverse
free
DC motor FA-130RA FA-130 FA130 by ASTROONSEN
...fa-130ra fa-130 fa130 by astroonsen thingiverse dc motor fa-130ra mabuchi ...
775
turbosquid
$2
Bracket Motor DC 775
...l bracket motor dc 775 for download as ipt, ige, stl, and 3ds on turbosquid: 3d models for games, architecture, videos. (1666552)
3d_export
$60
Architecture 775 3D Model
...lege campus max street landscape commercial building medical hospital offices
architecture 775 3d model lotusmodel 49160 3dexport
cg_studio
$10
BOSCH COOKTOP 775 8753d model
...753d model
cgstudio
.3ds .max - bosch cooktop 775 875 3d model, royalty free license available, instant download after purchase.
3d_export
$50
3D Home 775 3D Model
... chair furniture texture table lamp apartment rug carpet restaurant hotel sitting
3d home 775 3d model richard3015 47178 3dexport
3d_export
$15
monstera in a pot for the interior 775
...xport
ornamental plants for the street and interior in flowerpots.<br>houseplants<br>exotic plants<br>monstera
3ddd
$1
Moissonnier ref.775 half-moon L.XVI
...тура редактируемая, есть возможность поменять базовый и вторичный цвет, а так же цвет потертостей. модификаторы декора сохранены.
turbosquid
$6
Baker Oval Back Chair No. 775-30-9 from Milling Road collection
...rom milling road collection for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1147155)
3ddd
$1
potocco_diva_775-3
... diva , барный
potocco
diva 775
775 ast/ 775 ai/ 775 aiw
size:
w 47 cm d 51 cm h 106 cm
3ddd
$1
potocco_diva_775-1
...potocco_diva_775-1
3ddd
potocco
potocco
diva 775
775 st/ 775 i/ 775iw
size:
w 50 cm d 56 cm h 85,5 cm
3ddd
$1
potocco_diva_775-2
...otocco , diva
potocco
diva 775
775 pst/ 775 pi/ 775piw
size:
w 56,5 cm d 58,5 cm h 85 cm
Ryobi
thingiverse
free
Ryobi Logo
...ryobi logo
thingiverse
ryobi logo
thingiverse
free
adapter ryobi
...adapter ryobi
thingiverse
suction tube adapter ryobi band saw
thingiverse
free
ryobi vertical stand by powercam
...ical stand by powercam
thingiverse
vertical support for ryobi drill tool
for:
ryobi lsd 120
ryobi lsdt 120
support not necessary
thingiverse
free
Ryobi One+ Battery Adapter
...ryobi one+ battery adapter
thingiverse
remix milwaukee m18 to ryobi battery adapter for ryobi one+ battery
thingiverse
free
RYOBI ONE+ 1,5Ah
...ryobi one+ 1,5ah
thingiverse
ryobi one+ 1,5ah
holes are made for 4mm spax wood screws.
thingiverse
free
Ryobi Connector by ethanantcaballero
...ryobi connector by ethanantcaballero
thingiverse
ryobi piece that was missing. prevents saw dust from leaving tube.
thingiverse
free
Ryobi one + battery holder
...ryobi one + battery holder
thingiverse
holder for ryobi battery
thingiverse
free
Ryobi Sander Cap by thinkb4print
...ryobi sander cap by thinkb4print
thingiverse
to store the ryobi orbit sander p411
thingiverse
free
fermoir malette ryobi by phil34
...fermoir malette ryobi by phil34
thingiverse
fermoir de valise scie sauteuse ryobi
thingiverse
free
Ryobi vacuum by raccoo
...ryobi vacuum by raccoo
thingiverse
Saw
turbosquid
$1
Saw
...d
royalty free 3d model saw for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1390033)
turbosquid
$7
Saw
...alty free 3d model saw for download as obj, fbx, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1481343)
turbosquid
$30
saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Motor
archibase_planet
free
Motor
...base planet
motor motor engine engine electric motor
motor wagner n250213 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Motor
...motor
archibase planet
motor motor engine engine
motor n151112 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Motor
...motor
archibase planet
motor motor engine engine
motor n150615 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
turbosquid
$15
Motor
...otor
turbosquid
royalty free 3d model motor for download as on turbosquid: 3d models for games, architecture, videos. (1639404)
3d_ocean
$5
Electric motor
...electric motor
3docean
car electric engine industry motor phase train vehicle
an electric motor enjoy!
3d_ocean
$18
Electric Motor
...electric motor
3docean
electric motor engine machine mover parts
3d model electric motor for hoist crane
turbosquid
$29
Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
electric motor
...electric motor
3dexport
electric motor use for industrial purposes
3d_export
$5
servo motor
...tor
3dexport
it's a simple part of servo motor 0.75kw for used in machines assembly to show specified motor in own project.
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.