Monster Tank Track DIY Kit for RC Cars and Trucks | 3D

Last crawled date: 1 year, 11 months ago

This is a DIY Kit for turning your RC car into a offroad juggernaught. Meant for 4wd vehicles using a 12 mm drive hex. It was designed to be a direct bolt on for the 4wd Traxxas Stampede but will fit many other vehicles with a 12mm drive hub. The drive hubs could be altered to fit whatever vehicle you are running. You could also bolt two on the rear of a 2WD and really have something interesting.. the possibilities are endless. (Note) (There isn't a part i because capital i's look like 1's and didn't want confusion) We added a Bumpstop plate that should be printed in TPU or a soft material that will prevent the tracks from doing a full rotation ,it will still allow the individual tracks at each end 'float' and semi rotate with the terrain but will stop it from doing a full rotation. All files have been updated.