Thingiverse
Monoprice MP Delta Pro Part Cooling Fang / Shroud Upgrade
by Thingiverse
Last crawled date: 4 years, 1 month ago
The original fan shrouds are terrible frankly. a simple overhang test demonstrated distortion at just 35-40 deg.
I redesigned them to properly point at the nozzle tip. Overhangs are now good up to 60-65 deg.
This is a great printer, just really needed this upgrade for more complex geometry.
Screws into original positions, fans clip right in like the originals.
WARNING: These shrouds sit JUST above the nozzle height so that's just something to watch out for. if your nozzle is different from the stock one you may need to sand down certain areas to make sure you don't get interference
Note: these printers come with some magnets clipped onto the arms just above the fans, DO NOT remove those magnets, it seems like they reduce magnetic interference from the magnetic ball joints to the fans. Removing those magnets dramatically reduces fan speed.
Enjoy!
I redesigned them to properly point at the nozzle tip. Overhangs are now good up to 60-65 deg.
This is a great printer, just really needed this upgrade for more complex geometry.
Screws into original positions, fans clip right in like the originals.
WARNING: These shrouds sit JUST above the nozzle height so that's just something to watch out for. if your nozzle is different from the stock one you may need to sand down certain areas to make sure you don't get interference
Note: these printers come with some magnets clipped onto the arms just above the fans, DO NOT remove those magnets, it seems like they reduce magnetic interference from the magnetic ball joints to the fans. Removing those magnets dramatically reduces fan speed.
Enjoy!
Similar models
thingiverse
free
MPSM Fan Shroud with Clips by paeyn
...esign.
if you don't print supports for the fan circle it could turn out a little rough (check pictures), but it still works.
thingiverse
free
Nozzle Viewing Shroud and Blower Fan Mount for Wanhao Duplicator i3 plus by _shape_shift_
... just print 4 of the shroud nozzles and a fan guard (optional) from his original thing -https://www.thingiverse.com/thing:1850770
thingiverse
free
Replacement for the filament fan shroud for the CR-10 3d Printer by SummersideGuy
...ed the original shroud for the filament fan for the cr-10 angled it downwards and reduced the amount of air that hits the hotend.
thingiverse
free
Ultimaker 2 Fan Shroud Mount Blower Fan by iopplm
...ans. 2 x washer on the left as when mount so that there is a small gap between the fan shroud and the nozzle heatsink.
thank you.
thingiverse
free
Artillery Sidewinder X1 Fan shroud support by MattMout
...e air.
this clip is made for the fan shroud of skinah : https://www.thingiverse.com/thing:3911689
thanks to him for his creation.
thingiverse
free
Clip-on Noctua fan grill 40mm by HalleoPard
... shroud of the other fan, though it is possible to install the grill without removing it.
the fan is clip-on. no screw necessary.
thingiverse
free
Ender 3 v2 Fan Shroud Clip by HyjinxTuesday
...ted to change the nozzle or get inside the fan shroud. i took out the screws on the back of the plate, and use this clip instead.
thingiverse
free
Fan Duct for FLsun Delta 3D printer by Victor_prp
...fix it to the hot end fan shroud with just a drop of glue, reducing vibrations.
feel free to modify the design and give feedback.
thingiverse
free
Creality Fan Shroud Screw Assistant
...nstall the creality fan shroud from their printer should they need to work on the hot end. i hope someone gets a benefit from it.
thingiverse
free
Clip-on Fan shroud for NEMA 17 stepper by StrictlyHabitual
...ing to reduce vibration. i also used some tpu and a 3d pen to draw on some bumpers inside the shroud to reduce vibration further.
Fang
turbosquid
$4
fang knife
...bosquid
royalty free 3d model fang knife for download as fbx on turbosquid: 3d models for games, architecture, videos. (1331310)
turbosquid
$15
Fanged sword
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Sun Fang
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$2
Dodge Viper Fangs Logo
...s) .images previews were rendered with blender internal render(cycles). format:(.3ds)/(.obj)/(.blend) .blender:face(12488)/ver...
3d_export
$10
wild boar with big fangs
...wild boar with big fangs
3dexport
wild boar made in zbrush
3d_export
$9
Dodge viper fangs 2003 logo 3D Model
...am vehicle part of auto transport 3d model logo emblem detailed high
dodge viper fangs 2003 logo 3d model rmodeler 59624 3dexport
3d_ocean
$12
Chair "The Skull with Fangs" (hi-poly model)
...was made as a max 2009 file with vray version 1.5, also included are max, .obj and .fbx exports with vray materials included. ...
3ddd
$1
Giorgetti
...giorgetti 3ddd giorgetti , fang стол для...
3d_export
$5
Brown Spider 3D Model
...brown spider 3d model 3dexport spider brown mustache fang glasses brown spider 3d model mus1232 87864...
3d_export
$30
Vampire Bust 3D Model
...vampire bust 3d model 3dexport vampire bust cape fang monster undead vampire bust 3d model twistedsyndrome 37923...
Monoprice
thingiverse
free
Display frame for Monoprice MP10
...display frame for monoprice mp10
thingiverse
display frame for monoprice mp10
thingiverse
free
Bridge covers Monoprice MP10
...bridge covers monoprice mp10
thingiverse
bridge covers monoprice mp10
thingiverse
free
Monoprice Coin by Peyton_Guyot
...monoprice coin by peyton_guyot
thingiverse
print this!
thingiverse
free
Voxel Monoprice spool holder by avalero
...voxel monoprice spool holder by avalero
thingiverse
voxel monoprice spool holder
thingiverse
free
Monoprice select mini knob by BramRausch
...monoprice select mini knob by bramrausch
thingiverse
this is a replacement knob for the monoprice select mini.
thingiverse
free
Monoprice 3d printer hook by dmitriyf
...monoprice 3d printer hook by dmitriyf
thingiverse
this is an attachment to monoprice select 3d printer v2
thingiverse
free
monoprice ultimate spool mount by death4u
...older by danmannert to monoprice ultimate 3d printer. it clips into the slot on the top of the printer for the optional enclosue.
thingiverse
free
Monoprice Mini Delta Foot
...a foot for a monoprice mini delta. it helps to increase airflow under the printer. it also helps to reduce the volume of the fan.
thingiverse
free
Monoprice Select Mini Fan Guard
...y fan protection. this is an essential upgrade.
used it on the monoprice select mini pro (from www.3dprinthings.be).
perfect fit!
thingiverse
free
Monoprice Cable Tie Mount
... but had to cut down the straps a bit to make them work. designed a quick mount that fits the full strap, item 6457 on monoprice.
Mp
turbosquid
$19
MP-5
...-5
turbosquid
royalty free 3d model mp-5 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1537795)
turbosquid
$3
MP-18
...turbosquid
royalty free 3d model mp-18 for download as blend on turbosquid: 3d models for games, architecture, videos. (1506436)
turbosquid
$5
Mp-28
...quid
royalty free 3d model mp-28 for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1613220)
turbosquid
$5
Nightstand MP
...yalty free 3d model nightstand mp for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1655571)
turbosquid
$25
MP 3008
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
MP 28
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
MP-44
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
MP-153
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Mp 41
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
MP-44.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Shroud
3d_export
$500
Centrifugal pump volute casing with impeller
...casing with impeller 3dexport volute casing with impeller and shroud ...
3d_export
$35
The Holy Face base relief 3D Model
...the holy face base relief 3d model 3dexport shroud turin veronica veronica's veil gospel ikon jesus holy face...
3d_export
$20
present car cloth presentation transport transportation shape concepts show celebration cover showro
...transportation shape concepts show celebration cover showroom covered revealin shroudd cover covering tarp draped fabric cloth showroom reveal revealing...
3d_export
$5
Lockheed F-117 Nighthawk lowpoly stealth bomber
...initial operating capability status in 1983. the aircraft was shroudd in secrecy until it was revealed to the public...
3d_export
$49
kriss vector gen 2 sub-d
...rear flip sight.<br>- vector ejection port.<br>- vector crb square shroud / 16"" sliencer.<br>- ds150 stock.<br>- .ma (maya 2020 ascii)<br>-...
3d_export
$10
vichy dining table
...in oak, sycamore and walnut marquetry.<br>even if the restaurant shroud the vichy in a long table cloth, two slender...
3d_export
$500
us navy pcu sterett ddg-104 arleigh burke class destroyer flight iia max
...the position has been shifted.<br>q. where are the exhaust shroud for the stacks?<br>a. since ddg-89, the exhaust system was...
thingiverse
free
shroud by samshay317
...shroud by samshay317
thingiverse
shroud
thingiverse
free
Fan Shroud
...fan shroud
thingiverse
this is a fan shroud for a 140mm fan
thingiverse
free
40mm fan shroud
...40mm fan shroud
thingiverse
40mm fan shroud
Delta
design_connected
$16
Delta
...delta
designconnected
arflex international spa delta computer generated 3d model. designed by koivisto, eero.
design_connected
$16
Delta
...delta
designconnected
lj lamps delta computer generated 3d model. designed by janowski-lenhart, sasha.
design_connected
$13
Delta
...delta
designconnected
emu group delta armchairs computer generated 3d model. designed by marin chiaramonte .
3ddd
$1
Delta Light
...delta light
3ddd
delta light , you-turn reo 3033
точечний светильник delta light
3ddd
$1
Blanco / delta
...blanco / delta
3ddd
blanco , мойка
мойка blanco delta со смесителем
3ddd
$1
Delta Light Spot
...delta light spot
3ddd
delta light
светильник фирмы delta light
3ddd
free
Bianchi Delta LVMDLT200100
...i delta lvmdlt200100
3ddd
bianchi delta , смеситель
смеситель bianchi delta lvmdlt200100
design_connected
free
Delta 190
...delta 190
designconnected
free 3d model of delta 190 by zanotta designed by progetti, emaf.
design_connected
$27
Delta 211
...delta 211
designconnected
zanotta delta 211 computer generated 3d model. designed by progetti, emaf.
design_connected
$27
Delta 234
...delta 234
designconnected
zanotta delta 234 computer generated 3d model. designed by progetti, emaf.
Upgrade
turbosquid
$15
Upgraded Glock
...e 3d model upgraded glock for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1185950)
3ddd
$1
Calligaris / UPGRADE
...calligaris / upgrade
3ddd
calligaris
c материалом
3d_export
free
cz upgrade
...cz upgrade
3dexport
https://www.buymeacoffee.com/mestrezen3d https://linktr.ee/mestrezen3
turbosquid
$80
Custer Tank upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Domestos 1 upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Upgraded tea cup
...upgraded tea cup
3dexport
a cup with an unusual design and a unique shape for a more enjoyable tea experience
3d_export
$8
dixy outlander classic style upgraded poplar wood lounge chair
...utlander classic style upgraded poplar wood lounge chair
3dexport
dixy outlander classic style upgraded poplar wood lounge chair
turbosquid
free
AK-12 + Upgrades low-poly 3D model
...ow-poly 3d model for download as fbx, blend, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1501145)
evermotion
$700
Upgrade from V-ray 1.5 to 3.5 for 3ds max
...here is no need to purchase a new dongle - your current dongles will be reprogrammed to carry v-ray 3. evermotion 3d models shop.
evermotion
$300
Upgrade from V-Ray 2.0 to V-ray 3.5 for 3ds Max
... interface (gui) for editing settings on one machine and one render node for rendering on one machine. evermotion 3d models shop.
Cooling
3d_export
$5
cool penguin
...cool penguin
3dexport
cool penguin
turbosquid
$1
cooling
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$26
cooling tower
...ers.<br>model with full detail in real size. all nodes and bolted connections are built. it was designed for nuclear power.
3ddd
$1
Mantra Cool
...14 версиях и obj-файл, а также материал для включенного и для выключенного светильника. turbosmooth/meshsmooth при необходимости.
3d_export
$5
cool electric guitar
...cool electric guitar
3dexport
cool electric guitar
turbosquid
$5
Cooling glass
...quid
royalty free 3d model cooling glass for download as obj on turbosquid: 3d models for games, architecture, videos. (1193829)
turbosquid
$30
CPU Cooling
...royalty free 3d model cpu cooling for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1386263)
turbosquid
$5
Cool CLoud
...
royalty free 3d model cool cloud for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1572300)
3d_export
$5
table cooling fan
...table cooling fan
3dexport
table cooling fan made of black plastic. individual small size cooling fan for office desk.
turbosquid
$29
cooling tower
... model cooling tower for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1396294)
Pro
turbosquid
$29
Pro
...ree 3d model mac pro for download as obj, c4d, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1505782)
turbosquid
$15
Apple Mac Pro and Pro Display
...ee 3d model apple mac pro and pro display for download as max on turbosquid: 3d models for games, architecture, videos. (1417078)
3d_export
$5
iphone 13 pro max and pro
...3 pro max and 13 pro the model is made in four colors (graphite, gold, silver, and blue), all of which are attached in the files.
3d_export
free
sapphire pro
...sapphire pro
3dexport
sapphire pro 3d printer head mask
3d_export
$4
macbook pro
...macbook pro
3dexport
macbook pro 13" inch 2020 years model
3ddd
free
GentleLase Pro
... syneron , candela
gentlelase pro аппарат для лазерной эпиляции
turbosquid
$25
PRO frame
...rbosquid
royalty free 3d model pro frame for download as max on turbosquid: 3d models for games, architecture, videos. (1148329)
turbosquid
$5
Alien pro
...osquid
royalty free 3d model alien pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1678446)
turbosquid
$5
iphone11 pro
...uid
royalty free 3d model iphone11 pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1562707)
3ddd
$1
Mac Pro (appel)
...mac pro (appel)
3ddd
компьютер , apple
mac pro
Part
3d_export
$5
Parts
...parts
3dexport
parts
3d_export
$5
Part
...part
3dexport
part
3d_export
$5
Part
...part
3dexport
machine part
3d_export
$65
Part
...part
3dexport
simple rendering of the scene file
3d_export
$65
Part
...part
3dexport
simple rendering of the scene file
3d_export
$30
fan part
...fan part
3dexport
this is a part of fan of pedastal
3d_export
$10
machine parts
...machine parts
3dexport
3d part modeling work ,contact for 3d work
turbosquid
$59
Mechanical Part
...id
royalty free 3d model mechanical part for download as c4d on turbosquid: 3d models for games, architecture, videos. (1410833)
turbosquid
$17
Road parts
...bosquid
royalty free 3d model road parts for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1192967)
turbosquid
$9
Cutter Parts
...squid
royalty free 3d model cutter parts for download as stl on turbosquid: 3d models for games, architecture, videos. (1220010)