momo wheel paddle extender for Logitech g27 by niccarseeya

Last crawled date: 3 years ago

-update 1/15/17 added STL. for paddles that work with higher offset steering wheels (steeringwheel sits further inwards).
This will work on a Logitech g27
-STL. is for LH paddle to print RH simply mirror image in slicer
-Printed out of PLA at 65mm/s 25% infill and a 1.2mm perimiter and top/bottom layer for strength.
-remove paddles from Logitech g27
-remember to remove the sticky rubber silencers on the back of the metal paddles we will use these later.
-take the original paddle bolts and thread them into the holes on the adaptor first to start threads, then pushed the paddle against the piece while screwing in the bolt till it bottoms.
-place the rubber silencers as seen in pictures on the backside of the extension just behind the two holes that go into the paddle slot on the g27.
-Fit the extension carefully into the paddle slot on the g27 and use x2 m3x15mm tapered head wood screws to hold in place.
the paddle is fairly close to the wheel i'm currently using as it has a shallow offset so I may make a new version in the near future, though if someone has a more of a "dished" momo this would be a perfect extension.
-I also have a g27 to momo steering wheel hub adaptor posted as well, both mods work well together.
Like! Share! Give a shout out! Lemme know how it works!