Thingiverse
Molex powered NodeMCU Neopixel Controller
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is a simple two part case that fits a NodeMCU v3 dev board, a 4pin Molex connector and a 3pin JST-SM connector. NodeMCU is flashed with WLED
You will need the following:
1 NodeMCU V3 development board
1 Molex male connector (I used one from a Cooler Master fan adapter)
1 JST-SM 3pin connector (you will have to trim the clip and the back protruding part of the connector with a utility knife)
hot glue (if the fitment of the connectors is loose)
wires and 3 dupont female pins (when assembling the case you will have to bend the dupont connectors for clearance with the lid of the case; I did this to keep the overall height under 20mm)
various diameters of heat shrink tubing
4 M3x16 allen head screws for the case (19mm overall length, 5.5mm diameter & 3mm tall head)
Wiring:
5v line from the molex is connected to the JST connector (wiring of JST according to your neopixel strip 5v pin) and to the VIN pin on the NodeMCU.
ground line from molex connected to the JST connector (wiring of JST according to your neopixel strip ground pin) and to the Ground pin on NodeMCU.
JST connector to pin D4 on NodeMCU (wiring of JST connector according to your neopixel strip data pin).
Grab and flash the latest release of WLED from here
Plug everything in and configure the controller by following the WLED wiki on Github
You will need the following:
1 NodeMCU V3 development board
1 Molex male connector (I used one from a Cooler Master fan adapter)
1 JST-SM 3pin connector (you will have to trim the clip and the back protruding part of the connector with a utility knife)
hot glue (if the fitment of the connectors is loose)
wires and 3 dupont female pins (when assembling the case you will have to bend the dupont connectors for clearance with the lid of the case; I did this to keep the overall height under 20mm)
various diameters of heat shrink tubing
4 M3x16 allen head screws for the case (19mm overall length, 5.5mm diameter & 3mm tall head)
Wiring:
5v line from the molex is connected to the JST connector (wiring of JST according to your neopixel strip 5v pin) and to the VIN pin on the NodeMCU.
ground line from molex connected to the JST connector (wiring of JST according to your neopixel strip ground pin) and to the Ground pin on NodeMCU.
JST connector to pin D4 on NodeMCU (wiring of JST connector according to your neopixel strip data pin).
Grab and flash the latest release of WLED from here
Plug everything in and configure the controller by following the WLED wiki on Github
Similar models
thingiverse
free
NodeMCU V3 Case (screwless) by gdenicola
...ed up the gap for the usb port
product examples that are working with this model.
psu female connection
nodemcu
3 pin cables
psu
thingiverse
free
Dual DPS-600PB Brackets by bdwalker1
...ne 12v and two 24v outputs. i also used a 4 pin jst-sm connector for 5v, gnd, pson and dc good connections from the control pins.
thingiverse
free
3 Pin JST Male Connector PCB mount
... can mount a jst 3pin/wire male connector to a pcb. typically used for led strips i.e.
the holes are 2mm with a distance of 10mm.
thingiverse
free
WLED NodeMCU Case
...se
thingiverse
wled box for nodemcu to use with wled firmware to control ws2812b rgb ledshttps://github.com/aircoookie/wled/wiki
thingiverse
free
Arduino Nano Addressable LED Case by MVstudios
...able leds can be powered directly and the jst sm connector can back feed power to the arduino eliminating the need for usb power.
thingiverse
free
JST XH Plug for Dupont Contacts 3-7 Pin Balance Plug by Juli_FPV
...pin balance plug by juli_fpv
thingiverse
this is a casing for jst xh compatible plugs which use the widespread dupont connectors
thingiverse
free
2x3p programming connector for OpenSprinkler 3.2 by stanoba
...n header (as shown on image)
solder wires
crimp dupont pins on other end
put pin header to casing and fix with hot-glue gun
thingiverse
free
Male Dupont to Anet Connector by ugothakd
...male dupont to anet connector by ugothakd
thingiverse
4 pin male dupont to 4 pin anet jst connector holder
thingiverse
free
9-pin Atari-style joystick tester by mrholub
...ctor's pins.
i've used an usb connector for powering circuit.
printing notes:
layer height: 0.2 mm
support :yes
brim: yes
thingiverse
free
Shapeoko 3 5v Distributer
...
you need a 5 pin jst-xh connector to fit in and any cable with a header
(wire connection brown 5v / black signal / blue ground)
Molex
thingiverse
free
Molex Male Cap by yvesall
...molex male cap by yvesall
thingiverse
simple cap for a female molex connector on a front panel rack
thingiverse
free
Molex housing by hinge
...molex housing by hinge
thingiverse
for computer psu
thingiverse
free
Molex Connectors by Brencaaa
...nector (male and female) ready to be 3d printed, to replace a broken one or just to add a "splash" of color to your pc.
thingiverse
free
Female Molex cap cover. by BrooklynBay
...
thingiverse
this is a remix from a male molex cap. it was scaled up to fit the female molex connector which is slightly larger.
thingiverse
free
Conector Molex 0510060200 by jjnm5
...x 0510060200 by jjnm5
thingiverse
conector molex 51006, tan solo luego hay que colocar un par de "header pins" y listo
thingiverse
free
MOLEX 8-pin connector cover by Dudux
...molex 8-pin connector cover by dudux
thingiverse
molex 8-pin connector cover.
thingiverse
free
Molex 0.093 2 contact connector by fdavies
...lex p/n 03-090-1027 receptacle.
standard molex contacts (female 02-09-1119 and male 02-09-2118) will push into them with a click.
thingiverse
free
Molex housing 0.093 male 3 PINS
...molex housing 0.093 male 3 pins
thingiverse
this is 3 pins molex housing, please use 0.093 male pins
thingiverse
free
Molex housing 2 PINS female 0.093
...molex housing 2 pins female 0.093
thingiverse
this is 2 pins female molex housing, please use 0.093 female pins
thingiverse
free
Molex housing 3 PINS Female 0.093
...molex housing 3 pins female 0.093
thingiverse
this is 3 pins female molex housing, please use 0.093 female pins
Nodemcu
thingiverse
free
NodeMCU by Joesuzurg
...nodemcu by joesuzurg
thingiverse
nodemcu
thingiverse
free
Case for NodeMCU
...case for nodemcu
thingiverse
case for nodemcu (esp8266 wifi development board)
thingiverse
free
NodeMCU Box by ajcorrea
...nodemcu box by ajcorrea
thingiverse
box for nodemcu amica
thingiverse
free
NodeMCU Housing by burt777
...nodemcu housing by burt777
thingiverse
housing for nodemcu project.
thingiverse
free
NodeMCU v3 Case
...nodemcu v3 case
thingiverse
its a nodemcu v3 case
thingiverse
free
NodeMCU DHT22 Box
...nodemcu dht22 box
thingiverse
a simple box for a nodemcu and a dht22 on a perf board.
thingiverse
free
ESP32 NodeMCU case
...esp32 nodemcu case
thingiverse
a remix scaled up a bit to fit an esp32 nodemcu
thingiverse
free
NodeMCU holder by jscottb
...nodemcu holder by jscottb
thingiverse
a nodemcu holder that give access to the pins from the top.
thingiverse
free
NodeMCU with breadboard by ardhoadnan
...ase + breadboard
parts
nodemcu + breakout base
half-size 400 point breadboard
5mm screw for breakout base fasterner
happy coding!
thingiverse
free
BrewPiLess / NodeMcu Case by theju
...ess controller or nodemcu
use with a nodemcu base which fit in the case.
a small hole under the nodemcu is used to route wires.
Neopixel
thingiverse
free
NeoPixel Mount
...neopixel mount
thingiverse
geeetech a10m neopixel mount
thingiverse
free
neopixel clock by arradan
...neopixel clock by arradan
thingiverse
this is frame for neopixel clock with 60 led neopixel ring.
thingiverse
free
neopixel cover
...neopixel cover
thingiverse
a basic cover made for neopixel's using clear pla filament
thingiverse
free
Neopixel Cover
...neopixel cover
thingiverse
neopixel cover i made for a knight rider light bar build made in freecad.
thingiverse
free
Joseph Neopixel by ShimmyJ
...joseph neopixel by shimmyj
thingiverse
neopixel shifts colors
thingiverse
free
3DX Neopixel Project
...3dx neopixel project
thingiverse
a design for a neopixel based off of arduino.
thingiverse
free
Neopixel Triplet by reed
...neopixel triplet by reed
thingiverse
holds three single pieces of a neopixel ribbon.
thingiverse
free
3dx neopixel by 21smithe
...3dx neopixel by 21smithe
thingiverse
print, then glue neopixels to the print. plug in the code and go
thingiverse
free
NeoPixel Star by fvan84
...neopixel star by fvan84
thingiverse
a star shape piece to fit 5 neopixel sticks
thingiverse
free
Funny Neopixel glasses
...funny neopixel glasses
thingiverse
tested with arduino uno and adafruit neopixel library :-) d=50mm
Controller
3d_ocean
$4
Controller TQFP32
...qfp32
3docean
chip controller cpu electronic gpu mcu micro controller silicon smd tqfp wafer
a micro controller in tqfp32 package
3d_ocean
$4
Controller TQFP44
...44
3docean
chip controller cpu electronic gpu mcu micro controller package smd tqfp tqfp44
a micro controller in a tqfp44 package
3d_export
$15
control unit
...control unit
3dexport
control unit
3ddd
$1
Yacht control
...yacht control
3ddd
yacht control
3d_export
$5
controle pgdm
...controle pgdm
3dexport
carcaca controle pgdm
turbosquid
free
controler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Control
...
http://www.schmitz-leuchten.de/html-ru/einzelleuchten-lampentyp-details.php?lamptype_no=700&group;=917&id;=731
3d_ocean
$4
Controller TQFP100
...100
3docean
chip computer cpu electronic gpu mcu micro controller pin platine silicon wafer
a micro controller in tqfp100 package
3d_ocean
$4
Controller TQFP64
...qfp64
3docean
chip computer cpu gpu mcu micro controller package silicon tqfp tqfp64 wafer
a micro controller in a tqfp64 package
3d_ocean
$7
Remote controller
... control switcher tv remote
remote controller for tv, sound systems etc easy to edit textures photo real rendered with mental ray
Powered
turbosquid
$100
power
...ower
turbosquid
royalty free 3d model power for download as on turbosquid: 3d models for games, architecture, videos. (1421990)
3d_export
$5
Power
...power
3dexport
3d_export
$5
power outlets
...power outlets
3dexport
power outlets
3ddd
$1
lion power
...lion power
3ddd
лев , статуя
lion power gold sculpture
3ddd
$1
Sea Power
...
компас , море , часы
часы с компасом sea power
3ddd
free
Meridiani / Power
...power
3ddd
meridiani , круглый
стол power производитель meridiani, диаметр 120,высота 67
3d_export
$5
Power Surge
...power surge
3dexport
the power surge is a all mesh carnival ride to lower in game part count and lag
turbosquid
$8
Airport Ground Power Unit (AXA Power )
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Power Houser
...rbosquid
royalty free 3d model power houser for download as on turbosquid: 3d models for games, architecture, videos. (1333800)
3d_export
$5
power outlet
...power outlet
3dexport
power outlet<br>format file maya 2018, 3d max 2017, obj, fbx