Modulus Hybrid Pusher by NavReth

Last crawled date: 2 years, 9 months ago

Was wanting a hybrid pusher for my Modulus ECS-10, but nobody made one. My solution was to designed one in Tinkercad. It's not perfect, but it works quite well. You might need some post processing depending on your printer. For me, I had to sand down the wedge at the bottom a bit because it got halfway through a trigger pull.
I printed this in PLA+, but depending on heat, you might want to print in ABS to keep it from warping. I have not tested it enough to know how bad it warps in heat yet.
Credit to Worker for their Stryfe pusher, which I took heavy reference from. This is also designed to work with their half-dart magazines and adapter. Check their stuff out, it's great.
This could possibly work with the Demolisher too. I know they have the same flywheel cage, but I'm not 100% sure about their pushers.
Here is the link to the TinkerCAD file if you would like to modify it for your own use: https://www.tinkercad.com/things/bfdsRCLHEGR-modulus-pusher