MODULO - Crack-free Modular Tubing / Pipe Coupling System by crunchysann

Last crawled date: 3 years, 1 month ago

I designed this for use on my other project here https://www.thingiverse.com/thing:2757069
But figured these clamps could also be used to build large structural frames.
INSTRUCTION
Print ALL parts with the largest face on the bed for best strength.
3 or more wall/perimeters
3 or more Top/bottom layers
Watch video for assembly stepshttps://www.youtube.com/watch?v=nTArOmdYkaI
Possible configurations currently limited to 0-90, 90-90 Degree angles - different blocks can be made for different coupling angles:
Use 6" long 1/4" Hex screws and nuts from local hardware store to assemble.
Use 3.5" long 1/4" Hex screws and nuts from local hardware store to clamp tubing
Currently fits the following pipes/tubes:
1.25" metal Electrical conduit Pipes (AKA 1-1/4" Conduit)
1.5" OD Stainless Steel pipes (https://www.speedymetals.com/pc-4485-8276-1-12-od-x-065-wall-tube-304-stainless-steel-annealed.aspx)
Fit any pipe with an Outer Diameter of 38.3" or smaller.
Feel free to make shims for smaller diameter pipes :) and post in comments section if you need shims to make these work with smaller pipe diameters.
Follow my project here: https://crunchysann.com/BL/projects/