Modular Storage Box by Dombi3D

Last crawled date: 3 years ago

This is a modular box design firstly for Tea lovers but you can use it for electronic parts also if you want. It has a lid that keeps the tea bags aroma inside the box and any time you can print additional boxes if you want to expand your collection.
Because transparent filaments are not transparent enough I used 2mm thick Plexiglass (60X75mm) as a window which is very easy to cut at home. Another required part is the neodymium magnet which has 3mm diameter and 1mm height.
I used magnets just in 2 corners and it can still hold the Teabags inside the box even if I hold it upside down but there is an option to use all the 4 corners if you want.
The connections are tight so to bind them togehter you need some force, but than it keeps everything nicely in place. The magnets and the handle are press fitted, the plexi glass could be also if you can cut precisely but I used in the corners one drop superglue to keep it in place.
Between the 4 boxes at the corner has enough place to push through an M3 bolt if you want to fix them on the wall from the back.
Watch my short movie how to assembly:https://youtu.be/qa3lWw5S-U0