Thingiverse
![Modified InMoov head, part 2. by monnerby](/previews/8901631.jpg)
Modified InMoov head, part 2. by monnerby
by Thingiverse
Last crawled date: 3 years, 1 month ago
First of all I want to say thanks Gael Langevin who is the creator of the InMoov 3D-printed robot that I'm building.
You can find the original design on his site http://www.inmoov.fr.
This post is the second one in a series of changes that I have made to the head of the InMoov robot.
The first post can be found here: http://www.thingiverse.com/thing:992918
The third post can be fond here: http://www.thingiverse.com/thing:1035688
This post shows the parts that are used to mount the raspberry PI 2, the Arduino Uno, the USB soundcard and the servos for the eyes.
The holder for the Raspberry PI 2 is made from http://www.thingiverse.com/thing:754078
The holder for the Arduino UNO is a remix to make more room for the USB cable.
The two holders are mounted back to back so that the Raspberry PI sits with the component side down and the Arduino with the component side up.
The USB Sound card is monted on bracket on the opposite side from the HDMI port of the Raspberry, as can be seen on the pictures.
You can find the original design on his site http://www.inmoov.fr.
This post is the second one in a series of changes that I have made to the head of the InMoov robot.
The first post can be found here: http://www.thingiverse.com/thing:992918
The third post can be fond here: http://www.thingiverse.com/thing:1035688
This post shows the parts that are used to mount the raspberry PI 2, the Arduino Uno, the USB soundcard and the servos for the eyes.
The holder for the Raspberry PI 2 is made from http://www.thingiverse.com/thing:754078
The holder for the Arduino UNO is a remix to make more room for the USB cable.
The two holders are mounted back to back so that the Raspberry PI sits with the component side down and the Arduino with the component side up.
The USB Sound card is monted on bracket on the opposite side from the HDMI port of the Raspberry, as can be seen on the pictures.
Similar models
thingiverse
free
![Modified InMoov head, part 3 by monnerby](/t/8896176.jpg)
Modified InMoov head, part 3 by monnerby
... camera is mounted upside down. it makes it easier in software if you mount it with the cable connector on the bottom of the eye.
thingiverse
free
![Rover 5 Arduino + Raspberry Pi 2 Mount by patvdleer](/t/8786813.jpg)
Rover 5 Arduino + Raspberry Pi 2 Mount by patvdleer
... pi 3
should work with the following arduino models:
arduino uno
arduino uno smd
arduino duemilanove
arduino diecimila
arduino ng
thingiverse
free
![Arduino Raspberry Pi Mount by superwoodle](/t/8878546.jpg)
Arduino Raspberry Pi Mount by superwoodle
...berry pi! this also features metric/imperial mounting holes.
arduino mega version here: https://www.thingiverse.com/thing:3451356
thingiverse
free
![InMoov Head - Raspberry Pi 3 mount by WayneKennedy](/t/8714825.jpg)
InMoov Head - Raspberry Pi 3 mount by WayneKennedy
...pins (be careful if you do this - do your research and ensure your 5v supply protects the pi, as you are bypassing the usb fuse).
thingiverse
free
![Robot arm by FFPB](/t/8529438.jpg)
Robot arm by FFPB
...e.com/thing:33327
the gripper is easy to print and to assemble.
video here: https://youtu.be/wgnvdzv360y
program is very simple.
thingiverse
free
![Raspberry Pi Snap Case Pegboard Mount by kwh32901](/t/8663678.jpg)
Raspberry Pi Snap Case Pegboard Mount by kwh32901
...r case with 30mm fan mount https://www.thingiverse.com/thing:2611134
has holes in the back for air, and access to the side ports.
thingiverse
free
![Raspberry Pi 3B+ Mountable Case Holder by Yeraze](/t/5108408.jpg)
Raspberry Pi 3B+ Mountable Case Holder by Yeraze
...led it in onshape, and modified it to simply use two countersink flat-head screws so that it can be mounted to nearly any surface
thingiverse
free
![Raspberry PI with Screen adapter for InMoov back by kwatters](/t/8674483.jpg)
Raspberry PI with Screen adapter for InMoov back by kwatters
...ed on https://www.thingiverse.com/thing:1384316 that will hold the ras pi with the 7" touchscreen in the back of the inmoov.
thingiverse
free
![Raspberry Pi Camera support & USB way to Octodash by E_Raw](/t/9243302.jpg)
Raspberry Pi Camera support & USB way to Octodash by E_Raw
...usb (power) way for a raspberry pi 7" touchscreen & rpi 4b enclosure mount ( https://www.thingiverse.com/thing:4663952 )
thingiverse
free
![Raspberry Pi Camera mount for C270 camera mount by Kissman](/t/8527595.jpg)
Raspberry Pi Camera mount for C270 camera mount by Kissman
...pi camera mount for this holder: https://www.thingiverse.com/thing:2818559
remixed from https://www.thingiverse.com/thing:2833311
Monnerby
thingiverse
free
![Sketch of a joint by monnerby](/t/8792372.jpg)
Sketch of a joint by monnerby
...a wrist in a robotic hand. it's uploaded here as a base for discussions and to show the principle. it has never been printed.
thingiverse
free
![Gears for DIY servo by monnerby](/t/8726717.jpg)
Gears for DIY servo by monnerby
...ps://github.com/kwatters/diyservo
more info about the diyservo is available here: http://myrobotlab.org/content/diy-servo-service
thingiverse
free
![CR-10 Filament spool adapter by monnerby](/t/8568670.jpg)
CR-10 Filament spool adapter by monnerby
...dapter by monnerby
thingiverse
spool adapter for the cr-10 printer. print 2 adapters and put on each side of the filament spool.
thingiverse
free
![Mount for Adafruit Trinket. by monnerby](/t/8879797.jpg)
Mount for Adafruit Trinket. by monnerby
... ring https://learn.adafruit.com/adafruit-neopixel-uberguide/arduino-library on my 3d printed inmoov robot. http://www.inmoov.fr.
thingiverse
free
![HotRod boot by monnerby](/t/8660060.jpg)
HotRod boot by monnerby
...ss support and a nice finish. i used a solder iron to glue the parts together. alternate methods are glue or using a 3d printpen.
thingiverse
free
![Neck part for the InMoov robot by monnerby](/t/8848820.jpg)
Neck part for the InMoov robot by monnerby
...nd the artneck_neckhointupperv3 from http://www.thingiverse.com/thing:1243403 so that the two modifications can be used together.
thingiverse
free
![Speaker case for the modified InMoov head by monnerby](/t/8881448.jpg)
Speaker case for the modified InMoov head by monnerby
....kjell.com/se/sortiment/dator-kringutrustning/tillbehor-till-surfplattor/hogtalare/3-5-mm/roxcore-portasound-hogtalare-bla-p23139
thingiverse
free
![InMoov Stronger Shoulder Frame as one piece by monnerby](/t/8671988.jpg)
InMoov Stronger Shoulder Frame as one piece by monnerby
...inmoov robot ( http://www.inmoov.fr ). no changes to the files. just moved around so that they can be printed as a single object.
thingiverse
free
![Battery holder for the InMoov robot by monnerby](/t/8845176.jpg)
Battery holder for the InMoov robot by monnerby
... the new back. i recommed that you use the new battery holder from here: http://inmoov.fr/inmoov-stl-parts-viewer/?bodyparts=back
thingiverse
free
![P3 Steel v4 Y-axis end stop mount by monnerby](/t/8775157.jpg)
P3 Steel v4 Y-axis end stop mount by monnerby
...39;t limit the y-axis movement. i use a 20x30 cm printbed and the switch touches the steel bushing holder instead ot the bushing.
Inmoov
thingiverse
free
![InMoov KeyChain !!! by Alessandruino](/t/8997876.jpg)
InMoov KeyChain !!! by Alessandruino
...inmoov keychain !!! by alessandruino
thingiverse
this is an inmoov keychain for you or a fantastic jewel for your inmoov :)
thingiverse
free
![Inmoov by joseph02](/t/8779866.jpg)
Inmoov by joseph02
...inmoov by joseph02
thingiverse
porte clé inmoov, 2 couleurs. imprimé sans raft ni support.
thingiverse
free
![inmoov full by ambroise](/t/8602459.jpg)
inmoov full by ambroise
...inmoov full by ambroise
thingiverse
inmoov full
thingiverse
free
![INMOOV EYELID ( PAUPIERES POUR INMOOV ) by heisenberg333](/t/8839403.jpg)
INMOOV EYELID ( PAUPIERES POUR INMOOV ) by heisenberg333
...ov parts .it's made very good .
you can see full tutorial on attached excel file
https://www.youtube.com/watch?v=h_jdau9v5zq
thingiverse
free
![Inmoov Legs by kike1978](/t/8699771.jpg)
Inmoov Legs by kike1978
...inmoov legs by kike1978
thingiverse
inmoov custom legs, not articulated.
thingiverse
free
![InMoov Head by Mindylee](/t/8918320.jpg)
InMoov Head by Mindylee
...inmoov head by mindylee
thingiverse
inmoov open source hardware
thingiverse
free
![inmoov top mouth by mix3rn](/t/8980401.jpg)
inmoov top mouth by mix3rn
...inmoov top mouth by mix3rn
thingiverse
inmoov
thingiverse
free
![Stand Inmoov](/t/4753985.jpg)
Stand Inmoov
...the servo drive head.
with this body, you can move your head upright. for movement, you can use the standard inmoov vertical stem
thingiverse
free
![back battery inmoov by ambroise](/t/8594946.jpg)
back battery inmoov by ambroise
...back battery inmoov by ambroise
thingiverse
back battery inmoov
thingiverse
free
![Inmoov cables protect by Markus75](/t/8988453.jpg)
Inmoov cables protect by Markus75
...inmoov cables protect by markus75
thingiverse
to protect the cables on inmoov
Head
thingiverse
free
![head](/t/4676892.jpg)
head
...head
thingiverse
my head
thingiverse
free
![Elf Head (Puppet Head) by cerberus333](/t/9011506.jpg)
Elf Head (Puppet Head) by cerberus333
...elf head (puppet head) by cerberus333
thingiverse
elf head (puppet head)
thingiverse
free
![head by Syzguru11](/t/8294030.jpg)
head by Syzguru11
...head by syzguru11
thingiverse
head
thingiverse
free
![head by Syzguru11](/t/8529478.jpg)
head by Syzguru11
...head by syzguru11
thingiverse
head
thingiverse
free
![Head by shura2000](/t/8810681.jpg)
Head by shura2000
...head by shura2000
thingiverse
head
thingiverse
free
![Will Head by mtilleard](/t/9036482.jpg)
Will Head by mtilleard
...will head by mtilleard
thingiverse
will head
thingiverse
free
![head by mariusvanberloo](/t/8992292.jpg)
head by mariusvanberloo
...head by mariusvanberloo
thingiverse
head
thingiverse
free
![head by lamerhouse](/t/9043363.jpg)
head by lamerhouse
...head by lamerhouse
thingiverse
head
thingiverse
free
![luxray head](/t/4770210.jpg)
luxray head
...luxray head
thingiverse
luxray head
thingiverse
free
![Chameleon head](/t/4679019.jpg)
Chameleon head
...chameleon head
thingiverse
cameleon head
Modified
thingiverse
free
![Modifiers by koringat](/t/8791751.jpg)
Modifiers by koringat
...modifiers by koringat
thingiverse
modifier project
thingiverse
free
![Modified Gun](/t/4699278.jpg)
Modified Gun
...modified gun
thingiverse
-
thingiverse
free
![modified rabbit by musky99](/t/8860614.jpg)
modified rabbit by musky99
...modified rabbit by musky99
thingiverse
modified
thingiverse
free
![Modifier Project by WBWIII](/t/8801547.jpg)
Modifier Project by WBWIII
...modifier project by wbwiii
thingiverse
modifier project
thingiverse
free
![modifiers by jenn0902](/t/8793812.jpg)
modifiers by jenn0902
...modifiers by jenn0902
thingiverse
an animal skydiving i guess
thingiverse
free
![Lamp (modified) by EwertonMoreira](/t/8309697.jpg)
Lamp (modified) by EwertonMoreira
...lamp (modified) by ewertonmoreira
thingiverse
modified lamp to take the cable groove.
thingiverse
free
![Modified Sphere by David_Mussaffi](/t/8982365.jpg)
Modified Sphere by David_Mussaffi
...modified sphere by david_mussaffi
thingiverse
modified spherehttps://www.youtube.com/watch?v=3b-eir6dsg4
thingiverse
free
![SMARS Modified Connector by Gadget83](/t/8258159.jpg)
SMARS Modified Connector by Gadget83
...smars modified connector by gadget83
thingiverse
modified smars connector for a tighter fit. modified by 1mm.
thingiverse
free
![Modified Star Puzzle](/t/4735490.jpg)
Modified Star Puzzle
...r puzzle
thingiverse
this is my modified version of the classical wooden six piece star puzzle.
not supports needed. good luck!
thingiverse
free
![modified for the US by Pixellating](/t/8369334.jpg)
modified for the US by Pixellating
...modified for the us by pixellating
thingiverse
2
thingiverse
free
![KV-2-2-2 by redstone125](/t/8008209.jpg)
KV-2-2-2 by redstone125
...kv-2-2-2 by redstone125
thingiverse
nuclear death refrigerator x3.
thingiverse
free
![Braccialetto 2 - Bracelets 2 by doctormao](/t/8996252.jpg)
Braccialetto 2 - Bracelets 2 by doctormao
...braccialetto 2 - bracelets 2 by doctormao
thingiverse
braccialetto 2 - bracelets 2
thingiverse
free
![Schleuder 2 / Slingshot 2 by Ju5tMak3](/t/8722912.jpg)
Schleuder 2 / Slingshot 2 by Ju5tMak3
...schleuder 2 / slingshot 2 by ju5tmak3
thingiverse
schleuder 2 / slingshot 2
have fun
thingiverse
free
![2-Hexagon-2 by letongtr](/t/8611226.jpg)
2-Hexagon-2 by letongtr
...2-hexagon-2 by letongtr
thingiverse
ultrascope project
thingiverse
free
![X'2 2 by kwcartroom](/t/8559596.jpg)
X'2 2 by kwcartroom
...x'2 2 by kwcartroom
thingiverse
try number 2
thingiverse
free
![2 Color Box (#2) by David_Mussaffi](/t/8970793.jpg)
2 Color Box (#2) by David_Mussaffi
...2 color box (#2) by david_mussaffi
thingiverse
2 color box (#2)https://www.youtube.com/watch?v=g5jgss-fn_8
thingiverse
free
![Toy Gun 2-2](/t/4885283.jpg)
Toy Gun 2-2
...toy gun 2-2
thingiverse
this morning's design.
thingiverse
free
![(a+b)^2 = a^2 +2ab+b^2, algebraic formula by lgbu](/t/8525684.jpg)
(a+b)^2 = a^2 +2ab+b^2, algebraic formula by lgbu
... ways to explain (a+b)^2 = a^2 +2ab+b^2.
the board alone is enough; the component pieces just add another layer of manipulation.
thingiverse
free
![2 by orhandrkn](/t/8752179.jpg)
2 by orhandrkn
...2 by orhandrkn
thingiverse
2
thingiverse
free
![2 by Nicolewake](/t/8916066.jpg)
2 by Nicolewake
...2 by nicolewake
thingiverse
2
Part
thingiverse
free
![part part part by ease](/t/8935833.jpg)
part part part by ease
...part part part by ease
thingiverse
part part part
thingiverse
free
![part](/t/4847434.jpg)
part
...part
thingiverse
part
thingiverse
free
![part](/t/4748434.jpg)
part
...part
thingiverse
3d test fan part
thingiverse
free
![part](/t/4708184.jpg)
part
...part
thingiverse
part i made for friend
thingiverse
free
![Turbo Part by part by Thellgti](/t/8858258.jpg)
Turbo Part by part by Thellgti
...turbo part by part by thellgti
thingiverse
turbocharger in parts
thingiverse
free
![Part Stand Part Holder](/t/4987592.jpg)
Part Stand Part Holder
...se
this is a part holder i designed for holding small parts for painting can be scaled up or down to suit your individual needs.
thingiverse
free
![Part by WizxGamer](/t/8253656.jpg)
Part by WizxGamer
...part by wizxgamer
thingiverse
part
thingiverse
free
![PART by leonk](/t/8958388.jpg)
PART by leonk
...part by leonk
thingiverse
part
thingiverse
free
![Part by empirekitchen](/t/8919151.jpg)
Part by empirekitchen
...part by empirekitchen
thingiverse
part
thingiverse
free
![part by migueljb01](/t/9010163.jpg)
part by migueljb01
...part by migueljb01
thingiverse
part