Cults
Mk Ultra - 3D printable 1/10 4wd buggy
by Cults
Last crawled date: 6 years, 2 months ago
This is the Mk Ultra. A high performance belt driven 4WD 1/10 scale buggy. It is very sophisticated and capable. The car can withstand plenty of abuse, and is easy to repair and maintain.
You can ask questions and read about the car development here:
https://www.rcgroups.com/forums/showthread.php?2952626-MKUltra-A-3D-Printable-4WD-1-10-scale-buggy
New videos:
https://www.youtube.com/watch?v=1nWqq_2L4IA
https://youtu.be/aaE_N88hye8
https://youtu.be/YBmmWoxyvKM
https://youtu.be/4D7m5fsxQ9I
Driving during development:
https://youtu.be/OO4_NmBveJM
How to install and remove the body:
https://youtu.be/kis6NHcgPJY
Free option parts:
https://cults3d.com/en/various/oil-shocks-for-1-10-scale-rc-cars
https://cults3d.com/en/various/cooling-fan-spur-gear-option-part-for-mkultra-1-10-4wd-buggy
https://cults3d.com/en/various/glueless-1-10-rc-car-wheels
The prototype runs with a 13,5T brushless sensored motor.
-Uses easy to find belts from Schumacher K1 buggy.
-Can use CV axles from multiple brands.
-Wrap around body is held on without clips or velcro and keeps dirt out.
-Super precise steering thanks to ball bearings in all hinges.
-Small turning radius.
-Radial shock positions ensure minimal height change with shock adjustment.
-Printable high strength gear, sealed gear or ball diff option.
-Printable 48dp pinion and spur gears.
-Printable slipper clutch option.
-Sway bar option front and rear.
-Two body styles to choose from.
-Many adjustment possibilities.
-Designed to comply with ROAR regulations.
-Easy to use shorty battery mount without clips.
Dimensions:
Wheelbase: 283.3-289.3 mm (adjustable with different rear arms)
Width: 249 mm (With quanum Vandal front CVD's and zero camber)
Front and rear track: Adjustable with different hexes.
Final drive gear ratio: 2.125:1 with 16t layshaft. 2:1 with 17t layshaft
Chassis length: 358.5 mm
Assembly notes:
-The sealed diffs are the strongest. They use 20 inner diameterx2mm O-rings to keep the grease in. They are not intended to be filled with silicone fluid, but rather made to keep the grease in.
-Do not over tighten any screws. Screws threaded into plastic only need to be snug. Stripped threads can be refreshed with a thin layer of CA glue, or just reprint the parts. That's the cool thing about printed cars.
-A PLA motor mounting plate can deform if the motor gets hot. If this is a problem, print the motor plate from PETG, ABS or nylon, or another more heat resistant material.
-The middle piece of the motor mount assembly has two small holes for mounting a small 25 mm fan. It will aid with motor cooling by circulating air inside the body and directing it over the motor.
-I recommend using a gear diff in the rear if it's difficult to avoid slip. If the ball diff screw comes loos while driving I recommend adding a drop of thin C on the end with the nut after tightening to the correct tension. The nature of PLA is such that it can deform over time and loosen the diff.
-Ball diffs must not slip noticeably. If they do the pulley part of the diff will deform from heat. To adjust the diff tension loosen the camber link on the side where the bolt head is, insert an allen wrench and turn the opposite wheel to tighten or loosen.
-If the ball diff tension loosens, add a drop of thin CA to the nut end of the diff after adjusting.
-Gear diffs spin more freely than ball diffs. Use this info to tune the car. A good starting point is gear in the rear and ball in the front.
-Suggested setting for links. Measured on outer ends:
Front camber links: 67mm
Steering links: 69 mm
Rear camber links: 77 mm
I suggest starting off with the link in the innermost and uppermost holes.
-The option parts contain various rear spindles and pivot blocks for changing the rear anti squat or toe in. The amount is marked on the parts and should be visible after printing.
-I suggest starting with the shocks in the center holes on both top and bottom.
-The shock adapters allow the use of aftermarket big bore springs with the suggested shocks below. The stock springs are too hard.
-The printable shock pistons are an upgrade from the ones included with the cheap shocks. I suggest one hole and ~550 CST shock oil for starters. It depends on your track and temperature.
-The shock covers fit over the top of the rear shocks and screws and protect the shock from damage, while also protecting the track surface from damage.
-The rear belt tensioner pushes up on the belt to tension it. It is accessed by a central screw from the underside of the chassis.
-The printable wheels have the same offset and width as competition Schumacher wheels.
-The body can take some practice to install. The trick is to tuck the nose in first, flex the front edges of the bod around the steering posts and then it will go on quite easy. There is no need to cut to make it fit. Check the video I posted above of installing and removeing the body.
-Body01-02 is the cab forward body
-Body03-04 is the futuristic body
I will make a setup sheet shortly.
List of required purchases. Many links contain my affiliate code so that I get a small kickback from your purchase on the sites. It does not cost extra because of this, but helpsme out a lot:
Electronics:
-Minimum 2 channel transmitter and receiver. This is the cheapest i can recommend:
https://www.banggood.com/Flysky-FS-GT2E-2CH-2_4G-RC-Controller-Transmitter-With-Receiver-p-1086215.html?p=HD240528697332015103
This is better:
https://www.banggood.com/RadioLink-RC4GS-2_4G-4CH-Car-Controller-Transmitter-R4FG-G-Gyro-Inside-Receiver-for-RC-Car-Boat-4-p-1169456.html?p=HD240528697332015103
-Your motor and ESC of choice? 13.5T sensored recommended.
Or the cheap option:
https://www.banggood.com/Racing-60A-ESC-Speed-Controller-F540-3000KV-Brushless-Motor-For-110-112-RC-Car-p-1175462.html?p=HD240528697332015103
-A good servo:
https://www.banggood.com/JX-Servo-PDI-6208MG-8kg-Servo-120-Degrees-High-Precision-Metal-Gear-Digital-Standard-Servo-p-1070889.html?p=HD240528697332015103
Hardware:
-Spur gear. For example
Associated 93T 48Dp - AS91097:
http://www.ebay.com/itm/Associated-SC10-4X4-Spur-Gear-93T-48Dp-AS91097/272527567454
Pinion:
http://www.ebay.com/itm/GoolRC-48DP-26T-27T-28T-29T-30T-Pinion-Motor-Gear-Combo-Set-for-1-10-RC-Car-K0E6/292065711416?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
-Servo saver. I recommend this one: https://hobbyking.com/en_us/kimbrough-mid-size-servo-saver-with-hole.html
-Schumacher k1 120t and 132t belts:
http://www.toughracing.com/zc126d/index.php?main_page=product_info&products_id=2456
http://www.toughracing.com/zc126d/index.php?main_page=product_info&products_id=2457
Also available from Ebay sellers. Easy to find.
-Quanum vandal Front CV axles OR BSR BZ-444 front CV axles (clones like FTX Vantage probably fit as well):
https://hobbyking.com/en_us/front-cvd-1-10-quanum-vandal-4wd-racing-buggy-2pcs.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=9130832446
https://hobbyking.com/en_us/front-cvd-bz-444-pro-1-10-4wd-racing-buggy-2pcs.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=3929904396
-BSR BZ-222 rear CV axles OR BSR BZ-444 rear CV axles (clones and other buggy CV's probably fit as well):
https://hobbyking.com/en_us/complete-cvd-set-2pcs-bsr-racing-bz-222-1-10-2wd-racing-buggy.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=2311678149
https://hobbyking.com/en_us/rear-cvd-bz-444-pro-1-10-4wd-racing-buggy-2pcs.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=1772075197l
-90 mm front shocks (~81 mm eye to eye center): http://www.ebay.com/itm/2pcs-Titanium-90mm-F104004-Adjustable-Shock-Absorber-for-RC1-10-Off-Road-Car/152475343522
-100 mm rear shocks (~91 mm eye to eye center): http://www.ebay.com/itm/2x-Titanium-Alloy-SCX0018-Adjustable-Shock-Absorber-for-RC1-10-AXIAL-Buggy-Car/162440442221
-40-45 mm long 3mm tie rods for the adjustable option. These fit perfectly:
https://hobbyking.com/en_us/tie-rod-2pcs-bsr-racing-bz-222-1-10-2wd-racing-buggy.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=6217988743
-4x 18x25x0,5 washers for ball diffs: http://www.ebay.com/itm/Shims-DIN-988-compensation-washers-spacer-washers-ø-6-100-mm-Shim-ring/262968954788
-30x 3mm hardened steel chrome or ceramic balls for ball diffs: http://www.ebay.com/itm/250-PCS-3mm-G10-Hardened-Chrome-Steel-Loose-Bearing-Balls/290959326207
-Slipper clutch spring
-2x 30mm diameter steel washers for slipper clutch.
-8x 12x18x4 ball bearings.
-12x 3x7x3 ball bearings.
-12x 5x11x4 ball bearings.
-2x 3x6 thrust bearings.
-2 mm piano wire to make pins.
-1.5 mm piano wire to make pins and sway bars.
-3x15 mm brass tube for rear tensioner.
-2x 3x20 mm brass tube for gear diffs.
-2x 3x25 mm brass tube for rear spindles.
-2x 3x26 mm brass tube for front spindles.
-3x34 mm brass tube for slipper clutch shaft.
-2x 3x48mm brass tube for rear suspension arms.
-2x 3x45mm brass tube for front suspension arms.
Screws:
-4x M2x6 + M2 washers.
-6x M2x8.
-14x M2x12.
-10x M3x8.
-23x M3x12.
-10x M3x16.
-1x M3x20.
-2x M3x25.
-2x M3x34.
-1x M4x16
-11x M3x12 countersunk.
-5x M3x20 countersunk.
-6x M3x25 countersunk.
Nuts:
-15x M3 nyloc.
-4x M4 nyloc
New option parts will appear as new free items on Cults3D.
You can ask questions and read about the car development here:
https://www.rcgroups.com/forums/showthread.php?2952626-MKUltra-A-3D-Printable-4WD-1-10-scale-buggy
New videos:
https://www.youtube.com/watch?v=1nWqq_2L4IA
https://youtu.be/aaE_N88hye8
https://youtu.be/YBmmWoxyvKM
https://youtu.be/4D7m5fsxQ9I
Driving during development:
https://youtu.be/OO4_NmBveJM
How to install and remove the body:
https://youtu.be/kis6NHcgPJY
Free option parts:
https://cults3d.com/en/various/oil-shocks-for-1-10-scale-rc-cars
https://cults3d.com/en/various/cooling-fan-spur-gear-option-part-for-mkultra-1-10-4wd-buggy
https://cults3d.com/en/various/glueless-1-10-rc-car-wheels
The prototype runs with a 13,5T brushless sensored motor.
-Uses easy to find belts from Schumacher K1 buggy.
-Can use CV axles from multiple brands.
-Wrap around body is held on without clips or velcro and keeps dirt out.
-Super precise steering thanks to ball bearings in all hinges.
-Small turning radius.
-Radial shock positions ensure minimal height change with shock adjustment.
-Printable high strength gear, sealed gear or ball diff option.
-Printable 48dp pinion and spur gears.
-Printable slipper clutch option.
-Sway bar option front and rear.
-Two body styles to choose from.
-Many adjustment possibilities.
-Designed to comply with ROAR regulations.
-Easy to use shorty battery mount without clips.
Dimensions:
Wheelbase: 283.3-289.3 mm (adjustable with different rear arms)
Width: 249 mm (With quanum Vandal front CVD's and zero camber)
Front and rear track: Adjustable with different hexes.
Final drive gear ratio: 2.125:1 with 16t layshaft. 2:1 with 17t layshaft
Chassis length: 358.5 mm
Assembly notes:
-The sealed diffs are the strongest. They use 20 inner diameterx2mm O-rings to keep the grease in. They are not intended to be filled with silicone fluid, but rather made to keep the grease in.
-Do not over tighten any screws. Screws threaded into plastic only need to be snug. Stripped threads can be refreshed with a thin layer of CA glue, or just reprint the parts. That's the cool thing about printed cars.
-A PLA motor mounting plate can deform if the motor gets hot. If this is a problem, print the motor plate from PETG, ABS or nylon, or another more heat resistant material.
-The middle piece of the motor mount assembly has two small holes for mounting a small 25 mm fan. It will aid with motor cooling by circulating air inside the body and directing it over the motor.
-I recommend using a gear diff in the rear if it's difficult to avoid slip. If the ball diff screw comes loos while driving I recommend adding a drop of thin C on the end with the nut after tightening to the correct tension. The nature of PLA is such that it can deform over time and loosen the diff.
-Ball diffs must not slip noticeably. If they do the pulley part of the diff will deform from heat. To adjust the diff tension loosen the camber link on the side where the bolt head is, insert an allen wrench and turn the opposite wheel to tighten or loosen.
-If the ball diff tension loosens, add a drop of thin CA to the nut end of the diff after adjusting.
-Gear diffs spin more freely than ball diffs. Use this info to tune the car. A good starting point is gear in the rear and ball in the front.
-Suggested setting for links. Measured on outer ends:
Front camber links: 67mm
Steering links: 69 mm
Rear camber links: 77 mm
I suggest starting off with the link in the innermost and uppermost holes.
-The option parts contain various rear spindles and pivot blocks for changing the rear anti squat or toe in. The amount is marked on the parts and should be visible after printing.
-I suggest starting with the shocks in the center holes on both top and bottom.
-The shock adapters allow the use of aftermarket big bore springs with the suggested shocks below. The stock springs are too hard.
-The printable shock pistons are an upgrade from the ones included with the cheap shocks. I suggest one hole and ~550 CST shock oil for starters. It depends on your track and temperature.
-The shock covers fit over the top of the rear shocks and screws and protect the shock from damage, while also protecting the track surface from damage.
-The rear belt tensioner pushes up on the belt to tension it. It is accessed by a central screw from the underside of the chassis.
-The printable wheels have the same offset and width as competition Schumacher wheels.
-The body can take some practice to install. The trick is to tuck the nose in first, flex the front edges of the bod around the steering posts and then it will go on quite easy. There is no need to cut to make it fit. Check the video I posted above of installing and removeing the body.
-Body01-02 is the cab forward body
-Body03-04 is the futuristic body
I will make a setup sheet shortly.
List of required purchases. Many links contain my affiliate code so that I get a small kickback from your purchase on the sites. It does not cost extra because of this, but helpsme out a lot:
Electronics:
-Minimum 2 channel transmitter and receiver. This is the cheapest i can recommend:
https://www.banggood.com/Flysky-FS-GT2E-2CH-2_4G-RC-Controller-Transmitter-With-Receiver-p-1086215.html?p=HD240528697332015103
This is better:
https://www.banggood.com/RadioLink-RC4GS-2_4G-4CH-Car-Controller-Transmitter-R4FG-G-Gyro-Inside-Receiver-for-RC-Car-Boat-4-p-1169456.html?p=HD240528697332015103
-Your motor and ESC of choice? 13.5T sensored recommended.
Or the cheap option:
https://www.banggood.com/Racing-60A-ESC-Speed-Controller-F540-3000KV-Brushless-Motor-For-110-112-RC-Car-p-1175462.html?p=HD240528697332015103
-A good servo:
https://www.banggood.com/JX-Servo-PDI-6208MG-8kg-Servo-120-Degrees-High-Precision-Metal-Gear-Digital-Standard-Servo-p-1070889.html?p=HD240528697332015103
Hardware:
-Spur gear. For example
Associated 93T 48Dp - AS91097:
http://www.ebay.com/itm/Associated-SC10-4X4-Spur-Gear-93T-48Dp-AS91097/272527567454
Pinion:
http://www.ebay.com/itm/GoolRC-48DP-26T-27T-28T-29T-30T-Pinion-Motor-Gear-Combo-Set-for-1-10-RC-Car-K0E6/292065711416?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
-Servo saver. I recommend this one: https://hobbyking.com/en_us/kimbrough-mid-size-servo-saver-with-hole.html
-Schumacher k1 120t and 132t belts:
http://www.toughracing.com/zc126d/index.php?main_page=product_info&products_id=2456
http://www.toughracing.com/zc126d/index.php?main_page=product_info&products_id=2457
Also available from Ebay sellers. Easy to find.
-Quanum vandal Front CV axles OR BSR BZ-444 front CV axles (clones like FTX Vantage probably fit as well):
https://hobbyking.com/en_us/front-cvd-1-10-quanum-vandal-4wd-racing-buggy-2pcs.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=9130832446
https://hobbyking.com/en_us/front-cvd-bz-444-pro-1-10-4wd-racing-buggy-2pcs.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=3929904396
-BSR BZ-222 rear CV axles OR BSR BZ-444 rear CV axles (clones and other buggy CV's probably fit as well):
https://hobbyking.com/en_us/complete-cvd-set-2pcs-bsr-racing-bz-222-1-10-2wd-racing-buggy.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=2311678149
https://hobbyking.com/en_us/rear-cvd-bz-444-pro-1-10-4wd-racing-buggy-2pcs.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=1772075197l
-90 mm front shocks (~81 mm eye to eye center): http://www.ebay.com/itm/2pcs-Titanium-90mm-F104004-Adjustable-Shock-Absorber-for-RC1-10-Off-Road-Car/152475343522
-100 mm rear shocks (~91 mm eye to eye center): http://www.ebay.com/itm/2x-Titanium-Alloy-SCX0018-Adjustable-Shock-Absorber-for-RC1-10-AXIAL-Buggy-Car/162440442221
-40-45 mm long 3mm tie rods for the adjustable option. These fit perfectly:
https://hobbyking.com/en_us/tie-rod-2pcs-bsr-racing-bz-222-1-10-2wd-racing-buggy.html?affiliate_code=BSFWYBUNYWDKXJN&_asc=6217988743
-4x 18x25x0,5 washers for ball diffs: http://www.ebay.com/itm/Shims-DIN-988-compensation-washers-spacer-washers-ø-6-100-mm-Shim-ring/262968954788
-30x 3mm hardened steel chrome or ceramic balls for ball diffs: http://www.ebay.com/itm/250-PCS-3mm-G10-Hardened-Chrome-Steel-Loose-Bearing-Balls/290959326207
-Slipper clutch spring
-2x 30mm diameter steel washers for slipper clutch.
-8x 12x18x4 ball bearings.
-12x 3x7x3 ball bearings.
-12x 5x11x4 ball bearings.
-2x 3x6 thrust bearings.
-2 mm piano wire to make pins.
-1.5 mm piano wire to make pins and sway bars.
-3x15 mm brass tube for rear tensioner.
-2x 3x20 mm brass tube for gear diffs.
-2x 3x25 mm brass tube for rear spindles.
-2x 3x26 mm brass tube for front spindles.
-3x34 mm brass tube for slipper clutch shaft.
-2x 3x48mm brass tube for rear suspension arms.
-2x 3x45mm brass tube for front suspension arms.
Screws:
-4x M2x6 + M2 washers.
-6x M2x8.
-14x M2x12.
-10x M3x8.
-23x M3x12.
-10x M3x16.
-1x M3x20.
-2x M3x25.
-2x M3x34.
-1x M4x16
-11x M3x12 countersunk.
-5x M3x20 countersunk.
-6x M3x25 countersunk.
Nuts:
-15x M3 nyloc.
-4x M4 nyloc
New option parts will appear as new free items on Cults3D.
Similar models
cults
free
Oil shocks for 1/10 scale RC cars
...-10pcs-bag.html
new shock caps with holes for m2x8 screws to strengthen them and prevent them from cracking around the seal slot.
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...97t gears are included. 48dp.
mkultra can be downloaded here:
https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
cults
free
Lynx - Fully 3D-printable 1/10 4wd buggy
...wheels01.stl - wheels for standard 2.2" tires, or printable tires
wing01.stl - wing
wingmount01.stl - separate wing mounts
cults
free
Differential for OpenRC F1 car.
...n't have ball bearings.
diff01.stl - differential with 40 tooth spur gear.
diff02.stl - differential with 46 tooth spur gear.
cults
free
Rear wheel race in progress
...ace in progress
cults
wheel race running race car
model for school project motor racing in progress.
with the right dimensions.
cults
free
Fully Printable Fixed Pitch RC helicopter.
...for the swash plate: https://www.banggood.com/fs-racing-fs-53910-fs-53625-6pcs-582002-roll-bearing-10x15x4mm-110-rc-car-parts-p-1153527.html?p=hd240528697332015103 assorted #0 screws or similar self tapping 1-1,5mm diameter screws and ~6mm (~1/4") length....
cults
free
Eachine DVR + lipo clip
...yking.com/en_us/turnigy-nano-tech-1500mah-2s1p-20-40c-lipo-receiver-pack.html?___store=en_us
https://youtu.be/fv0qdgfp5bc
cults
free
3DRC 1/24 AWD Drift car
...(i used this one: https://hobbyking.com/en_us/3100kv.html but any with a similar kv should work) 10 amp brushless car esc 4.4g...
cults
free
3DRC 2WD Buggy 1:16 Car
...th standard 1/16 scale shocks. i have also included 3d printable ones, but these only work with petg plastic and have no damping.
cults
$17
Lancia Delta HF Integrale Evo 1/10 touring car body
...nd front lights
06 - rear lights
07 - spoiler
08 - road car mirrors
09 - rally car mirrors
10 - windshield wipers, front and rear
Mkultra
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...97t gears are included. 48dp.
mkultra can be downloaded here:
https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
cults
free
Oil shocks for 1/10 scale RC cars
...to center. these shocks fit the mkultra buggy perfectly: https://cults3d.com/en/various/mkultra3d-printable-1-10-4wd-buggy the zip file contains a pdf with assembly instructions...
cults
free
Lynx - Fully 3D-printable 1/10 4wd buggy
...a new buggy. the stl's can be purchased here: https://cults3d.com/en/various/mkultra3d-printable-1-10-4wd-buggy lynx will remain free. i appreciate donations if you...
Shorty
cults
free
Crayon Holder with Lid
...nge, pale yellow and glow in the dark blue, but they can be printed in any color. for best results, we recommend printing in abs.
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...4wd buggy cults rc buggy 4wd racing mkultra brushless shorty model car a spur gear with integrated cooling fan...
cults
free
RS-01 Ayrton Senna’s 1993 McLaren MP4/8 Formula 1 RC Car
...any battery that is the size of turing nano-tech shorty 4200mah 2s2p hardcore lip pack (96x46.4x25mm). smaller batteries will...
cults
free
Fully printable Monster Truck
...rolling over. they can also be used with two shorty packs in parallel or even two full size packs...
Mk
cults
free
MKS Base 1.5 Aluminum Extrusion Case
...aluminum extrusion case
cults
prusai3 mks mksbase am8 aneta8 anet aliminum aluminumextrusion
mks base 1.5 aluminum extrusion case
cults
$3
Cavalier pour extruker MK
...ts
câbles extruker mk imprimante 3d
permet de bien maintenir les câbles et évite des cisaillements ou des desserrages prématurés.
cults
free
The "Proton MK 1" Model Rocket
...roton mk 1" model rocket
cults
the "proton mk 1" model rocket
the "proton mk 1" model rocket
cults
$20
Iron Man Mk 46 Helmet
...ovie.
the scale is set to so the width of the helmet is 20,2 cm.
you will need to cut the helmet to fit you're buildplate.
cults
free
Fan Mount for MKS BASE V1 3d printer board
...lternatively you can use zip ties.
i prefer to mount the fans under the part2, but you can also put the fans on top of the part2.
cults
free
Vickers MK 1 heavy machine gun, ca. 1900
...e gun.
[raw, uncleaned 3d scan data from a artec eva scanner]
auckland museum id: w1496
source record on auckland museum website.
cults
free
Flute
...bevel part. blow by forming a te opposite the mk marks (bevels opposite the...
cults
$24
Spitfire Mk XVI, 3D printable R/C plane
...d low stall speed is achieved for easy landing.
pdf/video guide [here](http://download.cgarch.cz/userguide_spitmkxviver12.pdf)
cults
free
RepRapDiscount Full Graphic Smart Controller Case
...full_graphic_smart_controller full_graphic_smart_lcd full_graphic_smart_lcd_controller lcd12864 lcd_12864 lcd_12864_holder mks mks_base mks_base_v1 mk_gen ramps ramps_14 reprapdiscount reprapdiscount_full_graphic_smart_controller reprap_discount reprap_full_graphic tevo tevo_tarantula this...
4Wd
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...97t gears are included. 48dp.
mkultra can be downloaded here:
https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
cults
free
Lynx - Fully 3D-printable 1/10 4wd buggy
...wheels01.stl - wheels for standard 2.2" tires, or printable tires
wing01.stl - wing
wingmount01.stl - separate wing mounts
cults
free
Wing for Schumacher CAT XLS
...wing for schumacher cat xls cults 4wd buggy cat rc car re-release schumacher vintage wing masami...
cults
free
Oil shocks for 1/10 scale RC cars
...to center. these shocks fit the mkultra buggy perfectly: https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wdbuggy the zip file contains a pdf with assembly instructions...
cults
free
Glueless 1/10 RC car wheels
...rear wheel use. the front wheel is mainly for 4wd but fit 2wd cars with 12mm hex as well....
cults
free
TAMIYA BOOMERANG 1:24 scale kit for SUBOTECH
...1:24 scale kit for subotech cults 1:10 1:20 1:24 4wd 4x4 abs boomerang brushless buggies buggy classic collectibles collection...
cults
free
TAMIYA BIGWIG 1:24 scale kit for SUBOTECH
...1:24 scale kit for subotech cults 1:10 1:20 1:24 4wd 4x4 abs boomerang brushless buggies buggy classic collectibles collection...
cults
free
TAMIYA HOTSHOT 1:24 scale kit for SUBOTECH
...hotshot 1:24 scale kit for subotech cults 1:10 1:24 4wd 4x4 abs body brushed buggies buggy car cars classic...
cults
free
TAMIYA NISSAN KING CAB 1:24 scale kit for WL-Toys A212
...1:24 scale kit for wl-toys a212 cults 1:24 2.4ghz 4wd 4x4 a212 banggood bigfoot brushed buggy classic contol dasmikro...
Buggy
cults
free
3DRacers - Buggy
...3dracers - buggy
cults
3dracers - buggy
3dracers - buggy
cults
free
Wheel for Baja Buggy
...wheel for baja buggy
cults
wheel for baja buggy.
purchase filament used in this 3d print!
cults
free
Luna City Police Buggy (Moon Patrol!)
...luna city police buggy (moon patrol!)
cults
luna city police buggy (moon patrol!)
luna city police buggy (moon patrol!)
cults
$3
Rally Buggy Scale model
...rinting process. i have included a complete model in case you might want to try a different division or other 3d printing method.
cults
$5
Demo Hawk Buggy scale model
...l the parts are watertight and has been aligned for easy 3d printing process.
sample printed model by: @ hill3d on instagram
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...97t gears are included. 48dp.
mkultra can be downloaded here:
https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
cults
free
3DRC 2WD Buggy 1:16 Car
...th standard 1/16 scale shocks. i have also included 3d printable ones, but these only work with petg plastic and have no damping.
cults
free
Lynx - Fully 3D-printable 1/10 4wd buggy
...wheels01.stl - wheels for standard 2.2" tires, or printable tires
wing01.stl - wing
wingmount01.stl - separate wing mounts
cults
$1
Steering servo housing Rc 1/18
...steering servo housing rc 1/18 cults rc car buggy truggy model because steering servo case. inside dimensions. 35.93...
Brushless
cults
free
Micro Quad fpv Racer 100mm Brushless 1S 0703 20.000kv
...= ld020411878172015024
https://www.youtube.com/watch?v=bvm__lzwcds&feature=youtu.be
https://www.facebook.com/microdure/
cults
free
Mini Quad Racer 100mm Brushless GemFan 0806 6200kv 2S
...-bn-4-leaf-3mm-square-hole-cw-ccw-fpv-racing-propeller-p-1137626.html?p=ld020411878172015024
https://www.facebook.com/microdure/
cults
free
Mini Quad Acro 120mm Micro Pico F3 Brushless 1103 2S 10.000kv
...r-prop-20pcs-for-720-8520-coreless-motor-diy-micro-quadcopter-p-1092166.html?p=ld020411878172015024
connection screws: m1.6x12mm
cults
free
Mini Quadcopter fpv Racer 120mm micro FC lumenier racing F4 Brushless 1103 10.000kv 2S
...r in picture 8.
the vtx unify heats very hard, i used a velcro to limit the heat and avoid the flipping of double faces classics
cults
free
Whoop Drone Cross 4S Night Flight Acro
...it is equipped with : micro f4 20x20mm motors brushless 1707 - 3900kv propellers lumenier 5040x4 cut to 70mm....
cults
free
3DRC 2WD Buggy 1:16 Car
...of m3 bolts (listed in assembly manual) 20mm diameter brushless inrunner motor. brushless esc 13g metal gear servo 2-3s...
cults
$2
DRONE FPV 280
...or pla carbon use 10 m3x16 2204 or 1806 brushless motor esc in the body 5 or 6 "propeller...
cults
free
Woop 105mm Indestructible TPU 1103 7800kv 3S
...ppm frsky: http://www.banggood.com/fr/fd800-tiny-frsky-8ch-ppmsbus-receiver-compatible-frsky-accst-x9dplusdjtdftdht-for-qx95-qx90-p-1108071.html?p=ld020411878172015024 esc4x12amp: http://www.banggood.com/fr/20x20mm-racerstar-mini-rs12ax4-12a-blheli_s-bb2-2-4s-4-in-1-brushless-esc-d-shot-ready-p-1132683.html?p=ld020411878172015024 brushless 1103 7800kv 3s: http://www.banggood.com/fr/kingkong-1103-7800kv-1-3s-brushlessmotor-for-50-80-100-rc-mini-multirotor-p-1122783.html??p=ld020411878172015024 propeller 4 blades : http://www.banggood.com/fr/10-pairs-racerstar-2035-50mm-4-blade-abs-propeller-1_5mm-mounting-hole-for-fpv-racing-frame-p-1127196.html?p=ld020411878172015024 propeller 5 blades max...
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...1/10 4wd buggy cults rc buggy 4wd racing mkultra brushless shorty model car a spur gear with integrated cooling...
cults
free
Air Raid Siren
...siren cults an air raid siren powered by a brushless motor (rctimer 5010-360kv). it has a total weight of...
Ultra
cults
$1
Goku Ultra Instinct
...goku ultra instinct
cults
dragon ball goku ultra instinct saiyan great
3d model of goku ultra instinct made on mudbox. (beginner)
cults
$6
Ultra modern
...ultra modern
cults
math modern pendant
6cm x 4.3cm x 2.5cm
volume: 0.34ml
weight 18k: 5.6gr
cults
$1
ultra-sound humidifier reducer
...ultrasound
ultra-sound humidifier reducer
qm3d
customized parts on www.qm3d.fr.nf
qm3dcontact@gmail.com
06 33 41 81 60
cults
free
Future Bear - M5A1 Ultra Evolution
...future bear - m5a1 ultra evolution
cults
m5a1 tank toys
my 123d design portfolio: future bear - m5a1 ultra evolution
cults
$3
ULTRA MAGNUS RID MISSIL REPLACEMENT
...placement
cults
transformers replacement toy ultra magnus rid collection
if you lost parts of your collection, you will love it.
cults
$9
Ultra modern two-finger strap
...ern two-finger strap
cults
signet ring modern man money steel ultra
diam: 20mm x 2
49mm x 15mm x 24mm
vol: 4.54ml
poids 925: 47gr
cults
free
Ultra Sierra Nevada Running mountain
...in montana education geography home maps map 3d map decoration running
ultra 3d sierra nevada circuit
i remember running trophy
cults
free
21mm Lens Cap (for H9 Ultra HD 4K Action Camera)
... me doing more things. thanks!
banggood: https://goo.gl/zxgx3a
gearbest: https://goo.gl/ffe59f
aliexpress: https://goo.gl/bqli15
cults
free
Ultra Durable Pagoda Antenna Protector
... of the pagoda antenna as the others have different plate spacing.
don't own a 3d printer? no problem! purchase it on ebay.
Racing
cults
free
Car race in progress
...car race in progress
cults
car running race race
car dimensions for school project current race.
cults
free
Rear wheel race in progress
...race running race car model for school project motor racing in progress. with the right...
cults
free
FPV Race Gates
...cults fpv race spoiled drone uav dji drone_racing fatshark fpv_racing gopro qav250 quadcopter race_gates make some cheap and easy...
cults
free
tutute racing circuit
...cuit
cults
tutute bolide circuit car child toy
small part circuit tutute racing car.
i will do another part if it interests me.
cults
free
Tiny Whoop Race Gate $0.50
...ce gate $0.50
cults
using 3/16" dowel from the home depot you can make a tiny whoop race gate to the size of your choosing!
cults
free
Q3D 220 FPV Racing Frame
...perior material for racing but this is a fun build that can be put together very cheaply and will fly just as well. #growthehobby
cults
$3
Lumenier qav-x race pod gopro mount
...lumenier qav-x race pod gopro mount cults gopro fpv racing quadcopters freestyle luminier qav-x qav210 realacc lumenier qav-x race...
cults
$3
Race car Speedstream
...l inspired by a famous model porsche carrera. it is suitable for adults and kids.
for axle, we use 2mm thick bike spokes :d
cults
$1
Inductrix / Tiny Whoop light racing frame
...s, black is esun abs plus / pro, translucent orange is esun petg.
short video of flight:
https://goo.gl/photos/sryxmps8okynhrsz9
cults
free
Simple, Easy Quadcopter/FPV Racing Drone
...as that's what it looked the best in, but acrylic is definitely not the strongest material choice as it's super brittle.
Rc
cults
free
RCS Malebot
...rcs malebot
cults
rcs malebot
rcs malebot
cults
free
RCS Hex Chain
...rcs hex chain
cults
rcs hex chain
rcs hex chain
cults
free
RCS Tree Ornaments
...rcs tree ornaments
cults
rcs tree ornaments
rcs tree ornaments
cults
free
RC Plane Stand
...rc plane stand
cults
rc plane stand
rc plane stand
cults
free
Skis for RC planes
...skis for rc planes
cults
skis for rc planes
skis for rc planes
cults
free
RCS Vacuum mold
...rcs vacuum mold
cults
rcs vacuum mold
rcs vacuum mold
cults
$2
Rc dashboard ladybug / beetle for RC 1/10
... drift scale beetle vw classic car rc car
dashboard and fly for rc 1/10 tamiya ladybug / bettle
attention to l scale of the fly
cults
$21
Flying Wings RC
...flying wings rc
cults
flying wings rc
cults
$3
Nitro RC horns
...nitro rc horns
cults
aileron modeling rc traxxas
3d model of an aleron for an automodelo rc 1/10 or 1/8.
cults
free
RC model engine
...rc model engine
cults
this is a mockup of an enya rc model engine.
Car
cults
free
Car Wheel, Well Car
...car wheel, well car
cults
car
pdf and plan piece made by config on solidworks
cults
free
Garage cars
...garage cars
cults
cars car arrangement box
car storage garage
cults
$4
Little Car
...little car
cults
little car
little car
cults
free
EUMAKERS' Car - Toy car
... of available colours, so have fun customising your eumakers' car!
designed by: [serena fanara](http://www.serenafanara.it/)
cults
$1
Car keychain
...car keychain
cults
new design keychain 4 * 4 car
cults
free
Puzzle car
...puzzle car
cults
puzzle poly because make
make your car
cults
free
Sports Car pull-back car toy
...sports car pull-back car toy
cults
car_toyn pull-back car sports_car toys
my 123d design portfolio - sports car pull-back toy
cults
$4
homer car the homero car
...sis (only supports for the chassis)
any comments are welcome! have fun printing !!
final size of the model 18 cm approx
cults
free
Car pencil pot / Car pencil box
...car pencil pot / car pencil box
cults
pot toy pencil
achievements of a pencil pot in the shape of a car.
cults
free
car mockups
...ckups
cults
hubcaps model car
realization of two type hubcap for car model diameter 100 mm height 40 mm printed scale 0.1 and 0.2
10
cults
free
Sphere Box 10
...sphere box 10
cults
sphere box 10
sphere box 10
cults
free
Bump Vase 10
...bump vase 10
cults
bump vase 10
bump vase 10
cults
free
Trophy Riser 10
...trophy riser 10
cults
trophy riser 10
trophy riser 10
cults
free
Arrayed Vase 10
...arrayed vase 10
cults
arrayed vase 10
arrayed vase 10
cults
free
UniCoFil-Vase-10
...unicofil-vase-10
cults
unicofil-vase-10
unicofil-vase-10
cults
free
Leaf Vase 10
...leaf vase 10
cults
leaf vase 10
leaf vase 10
cults
free
Light cage 10
...light cage 10
cults
light cage 10
light cage 10
cults
free
10 sided dice
...10 sides
10-sided dice with or without number according to your desire of personalization. possibility to customize it on request
cults
$29
Vans RV-10
...ans rv-10 3d print model
vans rv-10 ready for 3d printing.
use the "scale" option to resize the model to your liking.
cults
free
10-penny propeller spinner
...10-penny propeller spinner
cults
spinner 10-penny propeller
10-penny propeller spinner
Printable
cults
free
Lisa the printable skull
...lisa the printable skull
cults
lisa the printable skull
lisa the printable skull
cults
$20
Printable Architectural Kit 1
...printable architectural kit 1
cults
printable architectural kit 1
printable architectural kit 1
cults
free
Grevious Printable
...grevious printable
cults
just fixed it up so you could print this awesome creation by vfxbase out.
cults
$11
Printable Architecture Kit House 1
...printable architecture kit house 1
cults
printable architecture kit house 1
printable architecture kit house 1
cults
free
Boat (with Impeller) - spiral vase printable
...impeller) - spiral vase printable
cults
boat (with impeller) - spiral vase printable
boat (with impeller) - spiral vase printable
cults
free
Kataraman (with impeller) - spiral vase printable
...- spiral vase printable
cults
kataraman (with impeller) - spiral vase printable
kataraman (with impeller) - spiral vase printable
cults
free
roller bearing printable
...autocad file for editing on thingiverse.
.
.
cults
free
Impeller Boat RC - spiral vase printable
...impeller boat rc - spiral vase printable
cults
impeller boat rc - spiral vase printable
impeller boat rc - spiral vase printable
cults
free
Motor Boat RC - spiral vase printable
...motor boat rc - spiral vase printable
cults
motor boat rc - spiral vase printable
motor boat rc - spiral vase printable
cults
free
Planter - 3D Printable Mold or Planter
...le mold for a concrete planter. full set of instructions are available here:
https://www.adylinn.com/blog/2017/concrete-planter
1
cults
free
Bracelet No 1
...bracelet no 1
cults
bracelet no 1
bracelet no 1
cults
free
Hook, +1
...hook, +1
cults
hook +1
hook, +1
cults
free
Pokale 1-3, Winnercup 1 - 3
...pokale 1-3, winnercup 1 - 3
cults
pokale 1-3 winnercup 1 - 3
pokale 1-3, winnercup 1 - 3
cults
free
Super Mario Bros World 1-1
...super mario bros world 1-1
cults
super mario bros world 1-1
super mario bros world 1-1
cults
free
Pythagoras Tree (1:1:Sqrt2)
...ap a little bit. the structure is very easy to design in 123d design using the basic idea of similarity. yes, this is a fractal.
cults
$1
Bowl 1
...bowl 1
cults
bowl household mug bread kitchen go flagon
bowl 1
cults
free
Wind Vase 1
...wind vase 1
cults
wind vase 1
wind vase 1
cults
free
magnet mushroom 1
...magnet mushroom 1
cults
mushroom magnet 1
magnet mushroom 1
cults
free
3D Fabric 1
...3d fabric 1
cults
3d fabric 1
3d fabric 1
cults
free
Pumpkin Vase 1
...pumpkin vase 1
cults
pumpkin vase 1
pumpkin vase 1