Thingiverse
mirrors+glass Toyota LC80 RC 1:10 by joebar65
by Thingiverse
Last crawled date: 3 years, 4 months ago
hello,
here is a mirror i made for my crawler based on toyota lc80 body. I beak them verrrrry often so i decided to create one. It's not 100% the same as the original given with the body but the job is done for me.
Because it's not the same, i decided to create at the same time a part that can be used as a glass, if you use a chrome paint for example.
even printed at 0.1 the details are not really good
don't hesitate to increase infill at 35-40%
here is a mirror i made for my crawler based on toyota lc80 body. I beak them verrrrry often so i decided to create one. It's not 100% the same as the original given with the body but the job is done for me.
Because it's not the same, i decided to create at the same time a part that can be used as a glass, if you use a chrome paint for example.
even printed at 0.1 the details are not really good
don't hesitate to increase infill at 35-40%
Similar models
thingiverse
free
Toyota Hilux body by 3rdaxis
...y by 3rdaxis
thingiverse
highly detailed 1980's style toyota truck body. this is just the body from a complete model i made.
thingiverse
free
Toyota Body Panel Clip
... on. they do sell completely new panels with the clips/ brackets attached for $160, so i decided to make my own clips out of abs.
thingiverse
free
Base Kossel Hexagonal heat bed with 19 mm glass by philipek
...de close to avoid the heat bed to move.
i use it with some coil and screw to level the bed. i couldn't find the link to it...
thingiverse
free
RCRUN RUN80 LC80 Battery door by xMATx
...ins and screwd them in to the reverse of the rear body mount holes.
no need to remove the body to change the battery.....whooop!!
thingiverse
free
WPL C24 mirror by uoah
... support that goes into the car but after that fits perfect and it's difficult to remove it and lose it (like the stock ones)
thingiverse
free
Proline SR5 magnetic body mount by chrisknowles
...l also work. it's very easy to install and then the body is held firm but easy to remove. the truck bed is permanently fixed.
thingiverse
free
Mirror Wall Mounts by bsween24
...hingiverse
we bought a cheap ($10) mirror, from wal-mart, for the kids' room so i decided to create some wall mounts for it.
thingiverse
free
Guzma's Glasses by tchnlgypsnt
...guzma's glasses by tchnlgypsnt
thingiverse
this is a model i created of guzma's glasses.
thingiverse
free
My printer test's by infomario
... same with the one that i created. fell free to share ;)
infomario reus.
https://www.facebook.com/reparacion.de.ordenadores.reus/
thingiverse
free
Eye Glasses by aziaziazi
... one arm. the lenses was ok, so i decided to model and print a brand new frame. it's fully functional and i use it every day.
Lc80
thingiverse
free
RCRUN RUN80 LC80 turbo by xMATx
...rcrun run80 lc80 turbo by xmatx
thingiverse
alternative turbo
thingiverse
free
Lc80 Scale Items by Poods
...
the roof rack size is
210mm x 130mm x 30mm
the snorkel is fromhttps://www.thingiverse.com/thing:3567432
heated to bend to shape
thingiverse
free
RCRUN RUN80 LC80 wheel well by xMATx
...un run80 lc80 wheel well by xmatx
thingiverse
props to crawlnyc for this awesome design of the wheel well for the rcrun chassis.
thingiverse
free
RCRUN RUN80 LC80 Battery door by xMATx
...ins and screwd them in to the reverse of the rear body mount holes.
no need to remove the body to change the battery.....whooop!!
Toyota
thingiverse
free
Toyota Keychain
...toyota keychain
thingiverse
toyota keychain
thingiverse
free
toyota keychain
...toyota keychain
thingiverse
keychain toyota
thingiverse
free
Toyota Ring
...toyota ring
thingiverse
toyota signet ring
thingiverse
free
Toyota Lithophane
...toyota lithophane
thingiverse
toyota lithophane logo print.
thingiverse
free
Toyota Logo
...toyota logo
thingiverse
just a toyota logo and a cilinder
thingiverse
free
Toyota MR2
...toyota mr2
thingiverse
this is intended to be a scale model of a mk1 toyota mr2.
thingiverse
free
Toyota coin holder by 1D_Design
...iace
toyota fortuner
toyota 4runner
toyota sequoia
toyota highlander
toyota corolla
toyota camry
oem part number # 55441-52040-c0
thingiverse
free
Toyota Logo by Aydelott
...toyota logo by aydelott
thingiverse
toyota stencils
thingiverse
free
Toyota coaster by Gepetto
...toyota coaster by gepetto
thingiverse
toyota coaster
thingiverse
free
Toyota keychain by KnockOutTR
...toyota keychain by knockouttr
thingiverse
toyota keychain
Mirrors
thingiverse
free
Mirror
...mirror
thingiverse
custom mirror
thingiverse
free
mirror mirror on the wall by Syzguru11
...mirror mirror on the wall by syzguru11
thingiverse
https://youtu.be/kfkn0v_v5d8
thingiverse
free
chevy mirrors
...chevy mirrors
thingiverse
mirrors
thingiverse
free
mirror mirror on the wall by Syzguru11
...mirror mirror on the wall by syzguru11
thingiverse
toblerone?https://www.thingiverse.com/thing:3077979
thingiverse
free
Mirror holder
...mirror holder
thingiverse
mirror holder with corner and lateral
use with ikea mirror 300x300x3mm
thingiverse
free
Mirror Bike
...mirror bike
thingiverse
bike mirror
thingiverse
free
mirror mirror on the wall by dionlevi
...mirror mirror on the wall by dionlevi
thingiverse
would appreciate it if you print this please let me know
thingiverse
free
Mirror/Window
...mirror/window
thingiverse
a window or a mirror for dollhouse or tabletop
thingiverse
free
Mirror Holder
...is made to lightly secure a mirror to the wall but still allow the mirror to slide out of the holders if need be.
screws required
thingiverse
free
MIrror by cushwa
...mirror by cushwa
thingiverse
sort of a fancy mirror. suitable for kings or queens
Rc
thingiverse
free
AirScoop for RC by RC-WDS
...airscoop for rc by rc-wds
thingiverse
air scoop used for rc planes ,pla or abs works fine
thingiverse
free
RC Servo mount by RC-WDS
...rc servo mount by rc-wds
thingiverse
servo mount for rc foam plane...
thingiverse
free
RC CAR
...rc car
thingiverse
rc car
thingiverse
free
RC Boat
...rc boat
thingiverse
rc boat. stl3dmodels.com
thingiverse
free
RC Wings
...rc wings
thingiverse
rc airplane wings
stl3dmodels.com
thingiverse
free
RC Wheel
...rc wheel
thingiverse
printable rc wheel with 12mm inside hex.
thingiverse
free
RCS Thruster by kazukiborchardt
...rcs thruster by kazukiborchardt
thingiverse
this rcs is based on joe barnards rcs rocket.
thingiverse
free
Rc Car Stand
...rc car stand
thingiverse
basic rc car stand. great for on-road rc cars. may be too low for offroad rc cars
thingiverse
free
RC Rim / RC Felge (for WLTOYS 1/12 RC Car) by saintyno
... / rc felge (for wltoys 1/12 rc car) by saintyno
thingiverse
rc car rims
print settings:
4 to 5 walls
4 top
4 bottom
50 % infill
thingiverse
free
Cache servo RC / servo cover RC by vertigo475
...cache servo rc / servo cover rc by vertigo475
thingiverse
cache servo pour ailes rc models.
2 versions
servo cover for rc wings
Glass
thingiverse
free
Glass
...glass
thingiverse
wine glass
thingiverse
free
Glass corner for 5mm glass
...glass corner for 5mm glass
thingiverse
fit 5mm glass on anet a6 heated bed.
thingiverse
free
Glasses protection / Sun glasses by 3DPhilou
...glasses protection / sun glasses by 3dphilou
thingiverse
glasses protection / sun glasses
thingiverse
free
MIERUNDES glasses on glasses stabilizer by INOUETAICHI
...mierundes glasses on glasses stabilizer by inouetaichi
thingiverse
mierundes glasses on glasses stabilizerhttp://mierundes.com/
thingiverse
free
Google Glass to Glasses Adapter by DDRBoxman
...google glass to glasses adapter by ddrboxman
thingiverse
hook up google glass to your glasses
thingiverse
free
Glasses
...glasses
thingiverse
i broke my glasses, so... why i cant design new one?
thingiverse
free
Glass Clip for 3mm glass by rdsail
...glass clip for 3mm glass by rdsail
thingiverse
bed glass clip for 3mm glass
it requires 3mm screw 10 or 12mm long and 3mm nut
thingiverse
free
Glasses by MakerAmit
...glasses by makeramit
thingiverse
glasses
thingiverse
free
glass by eezequielayala
...glass by eezequielayala
thingiverse
glass
thingiverse
free
glass by 24mrich
...glass by 24mrich
thingiverse
glass
10
thingiverse
free
the cube 10 x 10 x 10 mm by 3dluca
...the cube 10 x 10 x 10 mm by 3dluca
thingiverse
cube
10 x 10 x 10 mm
printing time < 5 minutes
thingiverse
free
A-10 Warthog
...a-10 warthog
thingiverse
a-10 warthog (the gun)
thingiverse
free
Stand for Voltcraft Devices SL-10, AN-10, LX-10 by Minfredus
...lmessgeraet_v1" has a "sound level meter sl-10"-branding. file "voltcraft_stand" comes without branding.
thingiverse
free
A-10 warthog
...a-10 warthog
thingiverse
a simple version of an a-10 warthog model
thingiverse
free
10 whisles
...10 whisles
thingiverse
10 whisles
if this is your design let me know
thingiverse
free
AT-10 by JARLANG
...at-10 by jarlang
thingiverse
at-10 british at - 1:72
paper project, but cool :)
thingiverse
free
Universal Z-Braces for CR-10 / CR-10S
...universal z-braces for cr-10 / cr-10s
thingiverse
universal z-braces for cr-10 / cr-10s
thingiverse
free
Fachwerkhaus 10 and 10S
...(original ~6x8m)
scale: optimized for 6mm (1:285)
format: stl
fachwerk / timberframe, optional base, 2 floors, roof with shingles
thingiverse
free
Cr-10s/10 first layer calibration by dilopsus
...cr-10s/10 first layer calibration by dilopsus
thingiverse
first layer calibration test for cr-10s/10 .
rotate model 90 degrees .
thingiverse
free
Creality CR 10 / 10s filament cleaner
...creality cr 10 / 10s filament cleaner
thingiverse
insert ptef tube in holes.
1
thingiverse
free
Magic Token +1/+1 & -1/-1 by Kilgara2B
...magic token +1/+1 & -1/-1 by kilgara2b
thingiverse
a magic the gathering token +1/+1 and -1/-1
thingiverse
free
MTG +1/+1 and -1/-1 counters by 4PStudiosGaming
...tudiosgaming
thingiverse
if you are in need of the 4pstudiosgaming +1/+1 and -1/-1 counters, then you came to the right page :-p
thingiverse
free
Fraction circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 by tfloveless
... 1/6, 1/8, 1/10, and 1/12 sized wedges as well as a circular base for them to fit onto. there are no labels on any of the pieces.
thingiverse
free
Adapter Syphon - 1 1/4" to 1 1/2" by _Stefano17_
...dapter for syphon - 1 1/4" to 1 1/2" h10,5mm
the project was realized with tolerances for printing with abs + tape ptf.
thingiverse
free
1 1/8" and or 1 1/5" headset press
...l fit both 1 1/8" and 1 1/5" bearing cups. i used a 3/8ths" threaded rod with nuts and thick washers on each end.
thingiverse
free
1-1/4" to 1-1/2" pipe cheeseborough clamp by aonomus
...design cheeseborough clamp for hanging lightfixtures and other items onto 1-1/4"-1-1/2" npt pipe. use at your own risk.
thingiverse
free
Shopping cart tokens 1€ 1$ 1£ by I_am_me
...them instead of money coin in your supermarket cart or in your swimming pool locker.
edit : updated 1£ coin with new dimensions
thingiverse
free
pipe thread adapter 1" to 1" 1/4 by Printerforever
...d adapter 1" to 1" 1/4 by printerforever
thingiverse
this is an adapter 1" to 1" 1/4 (male to male)
enjoy !
thingiverse
free
Playstation 2, 1:1 by Vitting
...playstation 2, 1:1 by vitting
thingiverse
made a 1:1 playstation 2.
thingiverse
free
Nesting Fraction Circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 V.2 by tfloveless
...re thinner and actually fit within each other to show equivalent fractions. also, check out the same version with braille (here).