Mini P6*6 Pinhole Camera Keyring by schlem

Last crawled date: 3 years ago

I made this from the original source files for the P6*6 120 Film Pinhole Camera. It is scaled at 25% of actual size and I'll be handing them out as give-away swag at the 2014 Seattle Mini Maker Faire, March 23 & 23, 2014.
If you look closely at the prints, you can discern the tiny knurling at the sides and on the shutter extension!
Some concessions have been made to print this so small:
First, all interior voids have been filled - sadly, It won't make photographic exposures!
The rear surface has been sliced flush to facilitate printing in one piece with a minimum of support. (this is the first design I have ever published that really requires support to print properly.)
There is a hole that pierces the mini P6*6, so that you can look at the world through a "pinhole" ...albeit a large pinhole. While it won't actually take pictures, I made a picture through it:http://www.flickr.com/photos/theschlem/12706444613/
No moving parts for the ultimate in reliability!
Lastly, there is a handy keyring attachment loop, so that you will always have a pinhole camera at the ready! Indeed, you can shoot photos through the "pinhole" (see the vignette of my toes).
I added the Knurled Surface Library V2 by aubenc as a source. Pardon the oversight.
ATTENTION
This work is licensed under the Creative Commons - Attribution - Non-Commercial license. This license applies only to the files and documents available for download from the Thing Files section of this Thing.All other related content (photographs, videos, and verbiage such as contained in "Description" or "Instructions" ) are excluded from this license. with all rights reserved, unless specifically available for download This notice constitutes a clarification, not a change, to licensing for this design.