Thingiverse
Mini-ITX NAS Open Frame by Nibb31
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is an open frame modular chassis design for a mini-ITX based NAS or home server.
The chassis measures 30.4 cm 22.8 cm x 22.8 cm and can take:
An ATX PSU
A mini ITX motherboard
Up to 5 x 3.5" HDDs (bracket holes are spaced for 1, 2, 3, 4, or 5)
Up to 3 x 2.5" HDDs or SSDs.
This makes it pretty much the most compact mini-itx case that can handle 8 drives and a full blown ATX power supply.
Notes:
The current design is not designed to take any extra PCI cards, but it can easily be modified. For large video cards, you will need to make the frame deeper than this one, by using tubes that are maybe 240mm long instead of 20mm. You might need to design an extra bracket to hold everything together.
The illustrations show a setup with two 3.5" HDD rails on the top. If you have more than 2 drives, I strongly suggest printing two more rails and adding two 12 mm crossbars to support the drives from below.
This modular design uses 12 mm tubes or rods and is based on my 12mm Tube Frame Connector Kit (https://www.thingiverse.com/thing:3046297) with the following additional parts:
2.5" HDD bracket (x2 fits above the PSU)
3.5" HDD brackets (x2 or x4 with extra crossbars if you have more than 2 drives)
PSU support (x1 fits underneath the PSU)
120 mm Fan bracket (x1 or x2 depending on how you want to fit it)
Faceplate for LEDs, Power and Reset buttons.
You will need the following lengths of 12 mm diameter aluminium tubes:
x4 273mm long tubes (horizontal X axis)
x6 200mm long tubes (vertical Z axis) or longer if you need clearance for a large CPU cooler.
x6 200mm long tubes (horizontal Y axis) or longer if you need clearance for a long video card.
x2 200 mm tubes if you want to fit the optional crossbars to support more than two 3.5" HDDs.
From the 120mm tube connector kit, you will need:
3-corner connectors (8x)
4-T pieces (4x)
3-T pieces (2x) for the optional crossbars.
A whole bunch of clips (print them by the dozen !)
The whole thing is designed to be customizable based on whatever your requirements are. You can take it apart, modify it, reassemble the parts, etc... It is also possible to add side panels to turn the open frame design into a closed case if you want.
In addition, you will need:
An assortment of PC case screws (for example: http://a.co/8Wi3nHZ)
LED, power, and reset buttons (for example: http://a.co/injxW3I)
M2.5x6mm self tapping screws for the 12 mm frame connectors.
The chassis measures 30.4 cm 22.8 cm x 22.8 cm and can take:
An ATX PSU
A mini ITX motherboard
Up to 5 x 3.5" HDDs (bracket holes are spaced for 1, 2, 3, 4, or 5)
Up to 3 x 2.5" HDDs or SSDs.
This makes it pretty much the most compact mini-itx case that can handle 8 drives and a full blown ATX power supply.
Notes:
The current design is not designed to take any extra PCI cards, but it can easily be modified. For large video cards, you will need to make the frame deeper than this one, by using tubes that are maybe 240mm long instead of 20mm. You might need to design an extra bracket to hold everything together.
The illustrations show a setup with two 3.5" HDD rails on the top. If you have more than 2 drives, I strongly suggest printing two more rails and adding two 12 mm crossbars to support the drives from below.
This modular design uses 12 mm tubes or rods and is based on my 12mm Tube Frame Connector Kit (https://www.thingiverse.com/thing:3046297) with the following additional parts:
2.5" HDD bracket (x2 fits above the PSU)
3.5" HDD brackets (x2 or x4 with extra crossbars if you have more than 2 drives)
PSU support (x1 fits underneath the PSU)
120 mm Fan bracket (x1 or x2 depending on how you want to fit it)
Faceplate for LEDs, Power and Reset buttons.
You will need the following lengths of 12 mm diameter aluminium tubes:
x4 273mm long tubes (horizontal X axis)
x6 200mm long tubes (vertical Z axis) or longer if you need clearance for a large CPU cooler.
x6 200mm long tubes (horizontal Y axis) or longer if you need clearance for a long video card.
x2 200 mm tubes if you want to fit the optional crossbars to support more than two 3.5" HDDs.
From the 120mm tube connector kit, you will need:
3-corner connectors (8x)
4-T pieces (4x)
3-T pieces (2x) for the optional crossbars.
A whole bunch of clips (print them by the dozen !)
The whole thing is designed to be customizable based on whatever your requirements are. You can take it apart, modify it, reassemble the parts, etc... It is also possible to add side panels to turn the open frame design into a closed case if you want.
In addition, you will need:
An assortment of PC case screws (for example: http://a.co/8Wi3nHZ)
LED, power, and reset buttons (for example: http://a.co/injxW3I)
M2.5x6mm self tapping screws for the 12 mm frame connectors.
Similar models
3dwarehouse
free
Mini-ITX case cube 180x180
...e cube 180x180
3dwarehouse
case of aluminium angles, mini-itx board, atx psu pcb, 1 3.5' hdd, 140mm fan, scythe big shuriken
thingiverse
free
Cooler Master Elite 110 - Dual 3.5" HDD Bracket by nhand42
...er it only fits 3x 3.5” hdd. this bracket fits 2x 3.5” hdd on the side for a total 4x 3.5” hdd. perfect for a mini-itx nas build.
thingiverse
free
MINI ITX CASE - ATX PSU(125mm depth) - 270mm GPU - 3.5 HDD by themakerunit
...g to my original design video on youtube.
important note: fits atx power supply with depth 125mm or less.
printed in black pla.
grabcad
free
MINI-ITX enclosure 9 drive 3.5" ATX PSU
...cut.
to upgrade and improve, the inventor folder countain the file
also on github : https://github.com/nathmo/mini-itx-nas-case
grabcad
free
Small mini-itx case concept
...se concept
grabcad
atx psu, 335mm length 2 slot gpu, 2x2,5 ssd/hdd, 1x3,5 hdd, up to 135mm cpu cooler, 2x120 mm fans, 1x80mm fan
3dwarehouse
free
Cooler Master Elite 110
...k panel light weight motherboard 2 3.5 mm mini jack ports good ventilation hdd ssd power supply videocard top flow cooler 120 fan
cg_trader
$20
Case pc gaming mini itx | 3D
...om- amazon.it .
if you look pictures you can understand that you need.
it's so easy to build your best mini gaming pc ever
thingiverse
free
ITX Case without Hardware Limits by markusz2n
...nector for the psu power.
the power and reset button are cherry mx green switches and for power and hdd led i used 3mm led's.
thingiverse
free
Mini ITX case [compatible with a full size cooler and a 205mm GPU] by whatsupdog3265
...atsupdog3265
thingiverse
this is a mini itx case.it is compatible with a full size cpu cooler, a 205mm long gpu, and an atx psu.
thingiverse
free
Dual 3.5" HDD Mount for Casetronic Travla C137 Mini-ITX by poberauer
...e drives drives
manual finishing:
drill (or melt) screw holes through the bottom piece, to mount to the bottom of the lower drive
Nibb31
thingiverse
free
Anet A8 LED Holder by Nibb31
...9;s all up to you. don't forget to add a resistor to the negative wire somewhere in your circuit. i used a 4.7 kohm resistor.
thingiverse
free
12mm Tube Frame Connector Kit by Nibb31
...eed. the depth of each connector is 15mm. you can then use m2.5x6 mm self-tapping screws to permanently hold everything together.
thingiverse
free
Ryobi Soldering Station for TS100 SQ001 TS80 TS80P Pinecil by Nibb31
...efore clipping them onto the case, otherwise you will melt the plastic. other wires can be soldered with the components in place.
thingiverse
free
Ryobi Soldering Station [BOTTOM PLATES] for TS100 SQ001 TS80 TS80P Pinecil by samudge
...seal closed the ryobi soldering station originally created by nibb31 they need to be glued in. i used thick...
Itx
3d_export
$56
teenage engineering computer 1 mini itx pc chassis
... get the best results in blender. no extra plugins are required for this model. lights and cameras are not included in the scene.
cg_studio
$9
Mini Computer3d model
...hardware harddisk desktop peripheral component leopard tiger snow small mini-itx pc design .3ds .xsi .obj .max .ma .lxo .lwo...
3d_export
$9
Mini Computer 3D Model
...hardware harddisk desktop peripheral component leopard tiger snow small mini-itx pc design maya supply 3ds max mini computer 3d...
thingiverse
free
ITX by irr1449
...itx by irr1449
thingiverse
itx case
thingiverse
free
Mini-ITX to Nano ITX adapter
...mini-itx to nano itx adapter
thingiverse
this is an adapter to put a nanoitx board in a miniitx case.
3dfindit
free
PICO-ITX
...pico-itx
3dfind.it
catalog: winsystems
3dfindit
free
NANO-ITX
...nano-itx
3dfind.it
catalog: winsystems
thingiverse
free
ITX computer case by hlmjjj1994
...itx computer case by hlmjjj1994
thingiverse
for itx mb only
thingiverse
free
Xbox-ITX
...originally went, mount the mini-itx motherboard on the original xbox mounting holes, and use the original power hole on the case.
thingiverse
free
thin ITX model by Goatee
...thin itx model by goatee
thingiverse
thin itx boards rough model
Nas
design_connected
$13
Na Xemena lounger
...na xemena lounger
designconnected
gandia blasco na xemena lounger computer generated 3d model. designed by gandia-blasco, jose.
3d_export
$15
nas storage
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
turbosquid
$20
Table dr Na
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
RAID NAS 4TB
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Aromas NA 777
...dd
aromas
люстра aromas na 777
1500mm x 200mm x 1140mmhttp://www.aromasdelcampo.com/ficha.php?f=4&t;=2&id;=130
design_connected
$18
New Antiques NA/1CB
... antiques na/1cb
designconnected
cappellini new antiques na/1cb chairs computer generated 3d model. designed by marcel wanders.
3ddd
$1
QNAP NAS Server
...qnap nas server
3ddd
сервер
сервер, сетевой накопитель.
polys/verts 41711/51066
turbosquid
$25
CIWL Boxcar NA 1259
...d model ciwl boxcar na 1259 for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1470438)
turbosquid
$9
Chandra rugs NAS-13702
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Chandra rugs NAS-13701
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mini
turbosquid
$10
Mini Mini Luceplan
...
royalty free 3d model mini mini luceplan for download as max on turbosquid: 3d models for games, architecture, videos. (1227359)
3d_ocean
$39
Mini Cooper
...mini cooper
3docean
cabrioler cooper mini
mini cooper cabrioler
3d_export
$30
Mini lathe
...mini lathe
3dexport
mini lathe
3d_export
$5
mini mouse
...mini mouse
3dexport
mini mouse
3d_export
$5
mini house
...mini house
3dexport
mini house
3d_export
free
Mini Mecha
...mini mecha
3dexport
concept of mini mecha
3d_ocean
$20
Mini Gun
...mini gun
3docean
gatling gun gun machine gun mini gun weapon
model of a mini gatling gun.
3ddd
free
Herve mini
... кофейный , herve
http://www.mobiliavenanti.it/ru/products/hervè-mini
3d_export
$5
mini wall
...mini wall
3dexport
mini wall for living room
3d_export
$5
mini bank
...mini bank
3dexport
mini bank 3d model
Frame
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame n071113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Frame
...frame
3ddd
frame
3ddd
free
Frame
...frame
3ddd
frame
archibase_planet
free
Frame
...frame
archibase planet
frame mirror frame ornament
frame n260113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame photo n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window window frame
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window frame window
frame 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame wall frame decoration
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window window frame
frame 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Open
3d_export
free
Opener
...r
3dexport
3d model of can opener. its my first work, if u can please show me my mistakes. this 3d model was created in autocad.
3d_export
free
Cap opener
...cap opener
3dexport
handy cap opener, more files/formats here:
3ddd
$1
Кресло, Open Oreon.
...кресло, open oreon.
3ddd
open , oreon
кресло, open oreon.
3d_ocean
$4
Open Book
...r interior max mental model open ray reading shelf text vray
open hardcover book with unique texture map on front and back cover.
turbosquid
$6
Opening Flag
...squid
royalty free 3d model opening flag for download as c4d on turbosquid: 3d models for games, architecture, videos. (1593555)
turbosquid
$10
Open book
...
royalty free 3d model open book for download as skp and obj on turbosquid: 3d models for games, architecture, videos. (1690781)
turbosquid
$2
bottle opener
...lty free 3d model bottle opener for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1621201)
turbosquid
$24
Bottle Opener
...free 3d model bottle opener for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1300948)
turbosquid
$20
Open Box
...yalty free 3d model open box for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1481218)
turbosquid
$10
Wine Opener
...ty free 3d model wine opener for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1240730)