Thingiverse
![Milight Hub case](/previews/4885158.jpg)
Milight Hub case
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a case for a DIY Milight hub.
See: https://github.com/sidoh/esp8266_milight_hub
What do I need to build this?
Nodemcu board with CP2102
Custom PCB
NRF24L01+
2 small screws
sma socket
glue to glue the parts of the top case
Soldering skills
How to do it?
print the second part with support. I added a second version (2_v2) of the top case with the antenna hole on the side. This way you don't need to change the sma socket.
you will need to desolder the pins of the nodemcu board and solder a pin header
desolder the sea socket of the NRF24L01+ module to solder a sma socket without 90 degrees angle
glue top case
If you don't want to make it yourself, I can build it for you. Just contact me via email (h4nc.zigbee(a)gmail.com) or with a private message in the home assistant forum.
https://community.home-assistant.io/t/buy-a-ready2use-zigbee2mqtt-stick-flashed-antenna-mod-and-printed-case/111743/124?u=h4nc
See: https://github.com/sidoh/esp8266_milight_hub
What do I need to build this?
Nodemcu board with CP2102
Custom PCB
NRF24L01+
2 small screws
sma socket
glue to glue the parts of the top case
Soldering skills
How to do it?
print the second part with support. I added a second version (2_v2) of the top case with the antenna hole on the side. This way you don't need to change the sma socket.
you will need to desolder the pins of the nodemcu board and solder a pin header
desolder the sea socket of the NRF24L01+ module to solder a sma socket without 90 degrees angle
glue top case
If you don't want to make it yourself, I can build it for you. Just contact me via email (h4nc.zigbee(a)gmail.com) or with a private message in the home assistant forum.
https://community.home-assistant.io/t/buy-a-ready2use-zigbee2mqtt-stick-flashed-antenna-mod-and-printed-case/111743/124?u=h4nc
Similar models
thingiverse
free
![Case for NodeMCU and NRF24L01](/t/4688237.jpg)
Case for NodeMCU and NRF24L01
...solder the pins of the nodemcu when using it in this casing. i wanted to have the led at the front, hence i designed it this way.
thingiverse
free
![NodeMCU Milight hub casing by Wilko007](/t/8037987.jpg)
NodeMCU Milight hub casing by Wilko007
... the wires onto the pcb's and the high profile version where you can solder the wires onto the contact pins of the pcb's.
thingiverse
free
![Milight Hub Case by bonze4](/t/8538871.jpg)
Milight Hub Case by bonze4
...or-on-an-esp8266/
required hardware:
1x nodemcu v2
1x nrf24l01+ module
1x led
1x 220 ohm resistor
1x wires (i used jumper cables)
thingiverse
free
![Milight hub case for wemos D1 mini by xyz_print](/t/8144266.jpg)
Milight hub case for wemos D1 mini by xyz_print
...cz.
guide: https://github.com/sidoh/esp8266_milight_hub
things you need:
1 wemos d1 mini
1 nrf24l01+
1 protoboard for wemos
thingiverse
free
![Boscam Transmitter Case with deported antenna by rboutrois](/t/8878759.jpg)
Boscam Transmitter Case with deported antenna by rboutrois
... just have to desolder the connector from your emitter, screw it in the case hole and solder it to the emitter with a coax cable.
thingiverse
free
![8266 case (NodeMCU)](/t/4889353.jpg)
8266 case (NodeMCU)
...u can print a flat bottom.
to remove the board from the case, you need to push the pins from the opposite side with a small pick.
thingiverse
free
![Arduino Sprinkler Controller case](/t/4653937.jpg)
Arduino Sprinkler Controller case
...ws.
i haven't yet published my sprinkler controller code, as i intend to rewrite it using the mysensors system and libraries.
thingiverse
free
![ESP8266 Milight Hub Case with Antenna by lleifermann](/t/8541156.jpg)
ESP8266 Milight Hub Case with Antenna by lleifermann
...o your account.
https://cad.onshape.com/documents/9bfecd22806a8be3afca8003/w/985e002e45537bbb66a0d7e8/e/dc5c28352e2b427bc70b689a
thingiverse
free
![Pwnagotchi Case for Antenna and RTC mods by MrNellow](/t/8148443.jpg)
Pwnagotchi Case for Antenna and RTC mods by MrNellow
...i may add a loop for carabiner later. i added my personal logos on my print, but there is no logo in uploaded stls. good hunting!
thingiverse
free
![LiPo Checker/Buzzer Case 2-3S - Feiyue FY08 and other models too by chrisvk](/t/8023920.jpg)
LiPo Checker/Buzzer Case 2-3S - Feiyue FY08 and other models too by chrisvk
... i have to remove the box, i equipped it with velcro tape.
now i can run the car without any worries to kill the lipo.
have fun!
Milight
thingiverse
free
![MILIGHT Remote holder by Rakete4711](/t/8255839.jpg)
MILIGHT Remote holder by Rakete4711
...by rakete4711
thingiverse
a holder for the milight remote control
https://www.tinkercad.com/things/fyuthe8hbqq-milight-fb-halter
thingiverse
free
![DIN MiLight IBox V2](/t/4706075.jpg)
DIN MiLight IBox V2
...din milight ibox v2
thingiverse
support for the milight ibox v2. slides in and stays in place by friction.
thingiverse
free
![milight remote holder by mosquito4](/t/8050070.jpg)
milight remote holder by mosquito4
...milight remote holder by mosquito4
thingiverse
holder for milight remote v2 warm & cold white remote.
thingiverse
free
![Milight Remote Holder by shadowtrk](/t/8729469.jpg)
Milight Remote Holder by shadowtrk
...t remote controller. controller is very touch sensitive and kept getting bumped on my coffee table and changing light colors etc.
thingiverse
free
![MiLight YT1 Support by peacho](/t/8126334.jpg)
MiLight YT1 Support by peacho
...milight yt1 support by peacho
thingiverse
just my design of yt1 .
thingiverse
free
![Milight Hub Case by bonze4](/t/8538871.jpg)
Milight Hub Case by bonze4
...or-on-an-esp8266/
required hardware:
1x nodemcu v2
1x nrf24l01+ module
1x led
1x 220 ohm resistor
1x wires (i used jumper cables)
thingiverse
free
![NodeMCU Milight hub casing by Wilko007](/t/8037987.jpg)
NodeMCU Milight hub casing by Wilko007
... the wires onto the pcb's and the high profile version where you can solder the wires onto the contact pins of the pcb's.
thingiverse
free
![Milight holder with screw hole by phettsack](/t/8254955.jpg)
Milight holder with screw hole by phettsack
...sack
thingiverse
this is a remix of rakete4711's holder.
i cutted the upper part and added a hole for a 3mm screw with head.
thingiverse
free
![Milight hub case for wemos D1 mini by xyz_print](/t/8144266.jpg)
Milight hub case for wemos D1 mini by xyz_print
...cz.
guide: https://github.com/sidoh/esp8266_milight_hub
things you need:
1 wemos d1 mini
1 nrf24l01+
1 protoboard for wemos
Hub
3d_export
free
![hub](/t/11458426.jpg)
hub
...hub
3dexport
realistic 3d model of hub. you can use this model in your automotive or mechanical projects.
design_connected
$4
![Hub 02](/t/4566089.jpg)
Hub 02
...hub 02
designconnected
glas italia hub 02 dining tables computer generated 3d model. designed by piero lissoni.
turbosquid
$8
![Electricity Hub](/t/13298813.jpg)
Electricity Hub
...id
royalty free 3d model electricity hub for download as fbx on turbosquid: 3d models for games, architecture, videos. (1298030)
turbosquid
$2
![Gokart Hub](/t/13244252.jpg)
Gokart Hub
...bosquid
royalty free 3d model gokart hub for download as ige on turbosquid: 3d models for games, architecture, videos. (1497617)
turbosquid
free
![Desert hub](/t/13286983.jpg)
Desert hub
...squid
free 3d model desert hub for download as blend and fbx on turbosquid: 3d models for games, architecture, videos. (1634736)
design_connected
$18
![UMBRA Hub Ladder](/t/7936494.jpg)
UMBRA Hub Ladder
...umbra hub ladder
designconnected
umbra hub ladder computer generated 3d model.
turbosquid
$48
![hub-dxf](/t/13421013.jpg)
hub-dxf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
![Shoulder Hub](/t/13234274.jpg)
Shoulder Hub
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![BMX Hub](/t/13380529.jpg)
BMX Hub
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
![Stairwell Hub](/t/562453.jpg)
Stairwell Hub
... is a low polygonal model. - poly count: 323 - formats: max /obj /fbx/3ds/dxf - high detail was preserved with 2048×2048 textu...
Case
3d_export
$1
![case](/t/11426443.jpg)
case
...case
3dexport
case
archibase_planet
free
![Case](/t/948749.jpg)
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/948750.jpg)
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/951666.jpg)
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/946639.jpg)
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/949378.jpg)
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/949761.jpg)
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/950554.jpg)
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Case](/t/950556.jpg)
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Case](/t/948218.jpg)
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.