Mighty Crafty Double Ended 9-Capsule Tube by spoopy_mulder

Last crawled date: 3 years, 3 months ago

Though I created this from scratch, I used the linked thing as a reference. I created knurled caps for aesthetic reasons, nixed the hole for keyring, made the size conducive to holding all 9 capsules plus a placeholder to indicate that all are spent, and added a second cap to load spent capsules from the bottom. I recommend printing one cap in a different color to indicate what is top and what is bottom.
Instructions for use:
Fill your capsules using your preferred method.
Load the tube with the puck first and the 9 capsules, upside down.
Load the top capsule into the vape (since it's upside down in the tube, it'll fit properly into the oven by simply tipping it out).
Once spent, open the tube from the bottom, insert the spent capsule into the tube, close the bottom, and repeat steps 2-4 until you reach the puck, indicating that it's time to dump and reload.
Enjoy!
After printing, I thought it would be ergonomically better to have a chamfered top edge on the caps to soften it a bit. So the STLs reflect this while the ones in the photos do not.