micro MRZ scisky flight controller 7mm motors or 8.5mm by Braaping_Pirate

Last crawled date: 3 years ago

Micro MRZ250 for the scisky FC can also take other controllers like inductrix types with litle mod.
7mm motors or 8.5mm . 8.5 has a square 7mm has a circle
prop size 52mm to 37 when motors are flush in motor holders
53 to 70mm when props are above top of the frame with motors and props in different heights.
double top is for one piece Camara VTX due to the antenna ,single or double top for split system.also added doulbe top FX798T which has an offset. Added camara angle block option.
solder motors + camara to FC mount with double sided tape to frame , glue the sloted top
then the 2nd small top piece . use heat shrink on bottom of motors or a dab og glue gun
also I glued two 5mm sleaves of heat shrink to the bottom of the frame with CA or super glue to hold the 205 lipo look at picture for better explanation .I use a neadle nose plyers to spread open if too tight
this is by far my favorite best performing micro quad does flips and roles with a flight time of 5 minutes on 205s luminniers waiting on 250s. props are nano QX . I have a Y4 design coming just waiting on parts
instructions coming
added 8.5mm motor bottom frame
average 6 grams
in ABS .4 nozzle .15 layer 15 percent infill